• School Mathematics
• /
• v.18 no.2
• /
• pp.425-440
• /
• 2016

Concept images play an important role in the acquisition of mathematical concept. However, sometimes concept images are derivatives of student's misconceptions. In addition, students always learn concept images despite teachers' efforts to teach concept definitions. Therefore, teachers need to know about all the concept images of a particular concept. This study aimed to analyze the concept image that students have about the triangle when they have already learned about the triangle in school. It was found that some students have different concept images about the triangle between Semo. Moreover, many students have misconceptions about vertices, sides, and angles. In particular, students think Gak denotes a side, although it means angle. Based on these results, I suggest that the curriculum and textbook require improvement.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.45-49
• /
• 2008

This paper investigated the accuracy of the current design formulae for the elastic buckling strength of web-tapered I-beams in AISC-LRFD specification. The basic concept is to replace a tapered beam by an equivalent prismatic beam with a different length, but with a cross section identical to that of the smaller end of the tapered beam. The modification factor, B, is used to account for the stress gradient within the unbraced length and the lateral restraining effects offered by the adjacent segments. The modification factor(B) suggested in AISC-LRFD specification was compared with the finite element method(FEM) results. This paper presented a redefined method to calculate the modification factor(B).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.309-309
• /
• 2023

자연재해대책법에 따라 방재성능목표를 달성하기 위해 행안부 및 지자체는 방재성능목표강우량을 설정·운영하고 있다. 현재, 기후변화로 인한 할증률을 산정하여 방재성능목표강우량 산정에 포함하고 있으나, 기후의 내적변동성으로 인한 강수의 변화는 반영하지 못하고 있는 실정이다. 이에 본 연구에서는 기후변화뿐만 아니라, 엘리뇨, 라니뇨, ENSO 등과 같이 지구의 내적인 원인들로 인해 변화하는 기후내적변동성(Climate Internal Variability, CIV)을 추가적으로 고려하여 할증률 개념을 확장하고자 한다. 외부의 Forcing 변화(즉 기후변화)가 없더라도 자연적으로 기후가 변동하는 현상을 모의하기 위해, 크게 3개 동역학적, 통계학적, 추계학적 방법들이 적용되어 기후내적 변동성을 정량화하고 있다. 본 연구에서는 기후에 대한 일기를 추계학적으로 오랜 기간 동안 생성하고 생성된 시계열을 바탕으로 자연적인 변동성을 추출(Stochastic Approach)하는 방법을 사용하여 기후내적변동성을 추정할 것이다. 구체적으로, 생성된 앙상블 시계열에 Detrended 방법과Differenced 방법을 각각 적용하여 기후내적변동성의 크기를 정량화하고 상호 비교할 예정이다. 정량화된 기후내적변동성의 크기는 추계학적 할증률로 변환될 것이며 방재성능목표강우량 산정에 포함시켜 과거 기왕최대강우량을 갱신하는 지역에 대한 위험도를 추가로 제시할 수 있을 것으로 기대된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.301-301
• /
• 2022

본 연구는 운영 조건이 달라짐에 따라 회전수가 변하는 기기의 정상적 가동 여부와 고장 종류를 판별하기 위한 인공지능 알고리즘의 적용을 다루고 있다. 회전수가 변하는 장비로부터 계측된 상태 모니터링 센서의 신호는 비정상(non-stationary)적 특성이 있으므로, 상태 신호의 한계치가 고장 판별의 기준이 되기 어렵다는 점을 해결하고자 하였다. 정상 가동 여부는 이상 감지에 효율적인 오토인코더 및 기계학습 알고리즘을 적용하였으며, 고장 종류 판별에는 기계학습법과 합성곱 기반의 심층학습 방법을 적용하였다. 변하는 회전수와 연계된 주파수의 비정상적 시계열도 적절한 고장 특징 (Feature)로 대변될 수 있도록 시간 및 주파수 영역에서 특징 벡터를 구성할 수 있음을 예제로 설명하였다. 차원 축소 및 카이 제곱 기법을 적용하여 최적의 특징 벡터를 추출하여 기계학습의 분류 알고리즘이 비정상적 회전 신호를 가진 장비의 고장 예측에 활용될 수 있음을 보였다. 이 과정에서 k-NN(k-Nearest Neighbor), SVM(Support Vector Machine), Random Forest의 기계학습 알고리즘을 적용하였다. 또한 시계열 기반의 오토인코더 및 CNN (Convolution Neural Network) 적용하여 이상 감지와 고장진단을 수행한 결과를 비교하여 제시하였다.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.616-626
• /
• 2014

In this paper, we introduce a real-time stereo-to-multiview conversion system using FPGA and GPU. The system is based on two different devices so that it consists of two major blocks. The first block is a disparity estimation block that is implemented on FPGA. In this block, each disparity map of stereoscopic video is estimated by DP(dynamic programming)-based stereo matching. And then the estimated disparity maps are refined by post-processing. The refined disparity map is transferred to the GPU device through USB 3.0 and PCI-express interfaces. Stereoscopic video is also transferred to the GPU device. These data are used to render arbitrary number of virtual views in next block. In the second block, disparity-based view interpolation is performed to generate virtual multi-view video. As a final step, all generated views have to be re-arranged into a single image at full resolution for presenting on the target autostereoscopic 3D display. All these steps of the second block are performed in parallel on the GPU device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.883-890
• /
• 2003

In this paper, Electromagnetic scattering problems by a resistive strip grating with tapered resistivity on a grounded dielectric plane according as strip width and spacing, relative permittivity and thickness of dielectric layers, and incident angles of a electric wave are analyzed by applying the FGMM(Fourier-Galerkin Moment Method) Known as a numerical procedure. The scattered electromagnetic fields are expanded in a series of floguet mode functions. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip. The tapered resistivity of resistive strips varies zero resistivity at strip edges. Then the induced surface current density on the resistive strip is expanded in a series of Chebyshev polynomials of the second kind. The numerical results of the geometrically in this paper are compared with those for the existing uniform resistivity and perfectly conducting strip. The numerical results of the normalized reflected power for conductive strips case with zero resistivity in this paper show in good agreement with those of existing paper.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.13-22
• /
• 2013

This paper deals with a novel method for numerical analyses of the tapered geometrical non-linear beam with three unknown parameters, subjected a floating point load. The beams with hinged-movable end constraint are chosen as the objective beam. Cross sections of the beam whose flexural rigidities are functionally varied with the axial coordinate. The first order simultaneous differential equations governing the elastica of such beam are derived on the basis of the Bernoulli-Euler beam theory. A novel numerical method for solving these equations is developed by using the iteration technique. The processes of the solution method are extensively discussed through a typical numerical example. For validating theories developed herein, laboratory scaled experiments are conducted.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.152-158
• /
• 2006

In this paper, electromagnetic scattering problems by a resistive strip grating with zero resistivity at the strip-edges on a grounded 2 dielectric layers according as strip width and spacing, relative permittivity, thickness of dielectric layers, and incident angles of a electric wave are analyzed by applying the FGMM(Fourier-Galerkin Moment Method) known as a numerical procedure. The scattered electromagnetic fields are expanded in a series of floguet mode functions. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip. The tapered resistivity of resistive strips varies zero resistivity at strip edges. Then the induced surface current density on the resistive strip is expanded in a series of Chebyshev polynomials of the second kind. The normalized reflected power with zero resistivity in this paper show in good agreement with those of existing paper.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.1
• /
• pp.33-44
• /
• 2015

Purpose: This study is to evaluate the clinical significance of the platform switching concept by comparing the marginal bone loss around platform-matched and platform-switched implants. Materials and Methods: Date of implant placement, diameter, length, implant-abutment connection type and absence of splinting prosthesis were investigated on patients who performed treatment with implant placement at Wonkwang University Dental Hospital Implant Center. To measure the marginal bone loss around implants, periapical radiographs of patient were used when implant was placed and when visited the center most recently by using the program, Emago advanced v5.6. Results: As a result of observing on 150 implants of 82 patients for 6 - 63 months, platform-matched implants showed $1.16{\pm}0.54mm$, platform-switched implants showed $0.68{\pm}0.27mm$ of marginal bone loss. Conclusion: It was considered that there is the positive effect to reduce marginal bone loss around platform-switched implants.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.40-51
• /
• 2015

In reinforced concrete structure, rebar connection method should be considered because of its structural role to resist the tensile stress and its structural load transmission with concrete in the concrete structure. Lapped splice and mechanical sleeve type connector have been traditionally used to connect rebar in the concrete structures. In this study, to examine the mechanical and failure behaviors of rebar bar connected by taper type coupler in the concrete member depending on connection type and condition, tensile tests of steel rebar with taper type coupler and flexible loading tests of concrete beams were conducted. Its tensile strength and flexible strength of the rebar connected by taper type coupler were compared and evaluated by mechanical behaviors of rebar. From this study, steel rebar connected by taper type coupler showed it has similar mechanical performance comparing with unconnected rebar, thus taper type coupler can be used in the rebar fabrication of reinforced concrete structure.