• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.35-41
• /
• 2008

Nutrient Enrichment Bioassays (NEBs) were conducted in the laboratory during June $22{\sim}28$, 2006 in order to determine primary limiting factor on the phytoplankton growth. For the NEBs, the water was sampled using a 10L polyethylene-lined container and dispensed into 2.5L container in the laboratory. The algal growths response in the control (C) and three treatments of phosphorus (P), 2-fold phosphorus (2P), and nitrate nitrogen $(NO_3-N)$ were monitored during 7 days. In the cubitainers which were spiked as P (T1) and 2P (T2) Chl-${\alpha}$ concentrations were decreased during the test period and the final concentrations was low than initial values. However, Chl-${\alpha}$ in the cubitainers which were spiked as $NO_3$(T3) and $P+NO_3$(T4) showed significant increases compared to the initial values, indicating that in the short-term experiments, nitrogen seemed to be a primary limiting nutrient during the periods of NEBs experiment. Long-term ambient nutrient data of TP and TN, and TN:TP mass ratios, however, showed a potential phosphorus limitation on phytoplankton growth and previous other researchers showed a variations of limiting nutrients by nitrogen or phosphorus depending on the seasons sampled and locations. In this study nitrogen as primary limiting nutrient in the NEBs seem to be an seasonal effect rather than the consistent nitrogen limitation.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.94-102
• /
• 2013

This study was carried out to determine the variation of the water level and crosssection area for investigating changes of stream foreland, and to determine the correlation between the average flow velocity and cross-section area so as to understand the hydrological characteristics of the stream. The slope of the cross-sectional area was changed in water levels of 0.6~1.0 m and 1.8~2.0 m. The first change occurred in the low-water level season, and the second change occurred in the high-water level seasons. It is assumed that the changes occurred due to the geological transfigure. The correlation between the cross-sectional area and the average flow velocity was 0.22~0.86 in the exponential equation and 0.20~0.87 in the linear equation. The low water level had a higher correlation than the high water level, and free weirs in the upper stream showed a very low correlation. Therefore, this study provides novel information for the management of water quality in the riverside, using correlation equations of the water level and flow velocity with the cross section area.

• Korean Journal of Ecology and Environment
• /
• v.41 no.2
• /
• pp.188-197
• /
• 2008

This research was a preliminary case study to determine the levels of total mercury in the tissues of sentinel species (Zacco platypus) and ecological health in relation to habitat characteristics and chemical conditions. We collected fishes in Gap Stream during June$\sim$October 2007 and analyzed the total mercury from five types of tissues such as liver, kidney, gill, vertebrae and muscle of Zaceo platypus using Direct Mercury Analyzer (DMA-80, US EPA Method 7473). Mean concentrations of total [Hg], based on all tissues, was 67.2 and $20.7\;{\mu}g\;kg^{-1}$, in the upstream and downstream site, respectively, indicating 3 times greater level in the upstream. In other words, the levels were higher in the pristine upstream than the downstream influenced by the wastewater disposal plant. Chemical water quality, based on BOD, COD and nutrients (TN, TP) showed that severe degradation occurred in the downstreams than the upstreams. Index of Biological Integrity (IBI) using fish multi-metric model averaged 32, indicating a "good$\sim$fair" condition and varied from 42 (excellent$\sim$good) at S2 to 22 (fair$\sim$poor) at S5 depending on the sites sampled. Qualitative Habitat Evaluation Index (QHEI) in the all sites averaged 142, which was judged as "good" habitat health, but showed a high variation (181 in Site 2 vs. 67 in Site 5). Overall data suggest that health conditions, based on IBI and QHEI, was better in the upstream sites but the mercury bioaccumulation levels in the fish tissues were opposite. We believe that measurements of various parameters are required for a diagnosis of integrative ecosystem health.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.29-45
• /
• 2017

This study explored spatiotemporal variability of water quality in correspondence with hydro-meteorological factors in the four stations of Euiam Reservoir located in the upstream region of the North-Han River from May 2012 to December 2015. Seasonal effect was apparent in the variation of water temperature, DO, electric conductivity and TSS during the study period. Stratification in the water column was observed in the near dam site every year and vanished between August and October. Increase of nitrogen nutrients was observed when inflowing discharge was low, while phosphorus increase was distinct both during the early season with increase of inflowing discharge and the period of severe draught persistent. Duration persisting high concentration of Chl-a (>$25mg\;m^{-3}$: the eutrophic status criterion, OECD, 1982) was 1~2 months of the whole year in 2014~2015, while it was almost 4 months in 2013. Water quality of Euiam Reservoir appeared to be affected basically by geomorphology and source of pollutants, such as longitudinally linked instream islands and Aggregate Island, inflowing urban stream, and wastewater treatment plant discharge. While inflowing discharge from the dams upstream and outflow pattern causing water level change seem to largely govern the variability of water quality in this particular system. In the process of spatiotemporal water quality change, factors related to climate (e.g. flood, typhoon, abruptly high rainfall, scorching heat of summer), hydrology (amount of flow and water level) might be attributed to water pulse, dilution, backflow, uptake, and sedimentation. This study showed that change of water quality in Euiam Reservoir was very dynamic and suggested that its effect could be delivered to downstream (Cheongpyeong and Paldang Reservoirs) through year-round discharge for hydropower generation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.2
• /
• pp.145-152
• /
• 2002

To compare the Carbon metabolic response to high temperature stress in Zoysiagrass [Zoysia matrella (L.) Merr.] and Creeping bentgrass (Agrostis palustris Huds) with respect to heat tolerance, C metabolites were determined from April to September. Sampling was carried out on an established golf course (Muan Country Club, Chonnam, Korea). Shoot mass(g Dry weight per hole cup) of creeping bentgrass started to decrease from June and recovered from August whereas that of zoysiagrass was less varied. Chlorophyll content in creeping bentgrass was significantly higher than zoysiagrass until July, and then decreased by 43% from July to August. Zoysiagrass contained higher soluble sugar than creeping bentgrass throughout experimental period. Soluble sugar in zoysiagrass increased about 58% from April to May, and less varied until August. Soluble sugar in creeping bentgrass slightly increased until July and sharply decreased at August. Starch concentration in zoysiagrass continuously decreased to September after a significant increase from April to May. A remarkable fluctuation in both starch and fluctuation concentration was observed between June and August showing high accumulation for June to July and high degradation for July to August. These results suggest that through creeping bentgrass suffers much severely from high temperature stress than zoysiagrass especially June to August. An active accumulation and degradation in nonstructural carbohydrate in creeping bentgrass during this period might be associated with heat stress.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.3
• /
• pp.131-137
• /
• 1986

Korean lawn, Zoysia japonica STEUD, is the type of a perennial warm-season lawn grass that has a naturally green period during 5 months from May to September. This study was carried out to detect the effects of N-P-K fertilization, regrowth capacity after mowing and chlorophyll contents on prolongation of the green period in Zoysia japonica grasslands. The results obtained are summarized as follows: 1. The effects of nitrogen fertilizer application on Zoysia japonica grasslands were affected on regrowth capacity after mowing, green color of leaf canopies and chlorophyll contents, respectively. 2. A the experimental plots which applied 45g/$m^2$/10 weeks of $N_3$ fertilizer, there were high significant effects on prolongation of the green period and the plots of phosphorus and potassium had additive effects. 3. Prolongation of the green period to the last ten days of October was obviously possible by slow degrees in proportion to increment of N-P-K fertilization. 4. However, it is interpreted that more prolongation of the green period is impossible with N-P-K fertilization and irrigation treatments, unless the intermediate turfgrasses between $C_3$ and $C_4$ plants must be found and bred.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.2
• /
• pp.105-110
• /
• 2013

This study was carried out to investigate the effect of nitrogen (N) fertilization on the forage growth, production and quality of native reed (Phragmites communis) grasses. Field experiments were conducted in Cheonan and in Ansan, 2012. Treatments were control (no N fertilization), 50 kg/ha and 100 kg/ha in Cheonan plots (fertilization on April $30^{th}$, and harvest on June $21^{st}$). Treatments in Ansan plots were control (no N fertilization) and 60 kg/ha (fertilization on May first, and harvest on August first). Forage growth and leaf colors were improved in N fertilized plots. However, the drymatter (DM) percentage was slightly decreased with N fertilization. Forage yields, in terms of DM, crude protein (CP) and digestible DM (DDM), were significantly increased with N fertilization in both sites. In Cheonan, DM, CP and DDM yields per ha were 4,026 kg, 235 kg and 1,850 kg, respectively, in the control plot, and were 4,658 kg, 306 kg and 2,388 kg, respectively, in the N 50 kg plot, and 5,622 kg, 446 kg and 3,143 kg, respectively, in the N 100 kg plot. In Ansan, DM, CP and DDM yields per ha were 2,802 kg, 177 kg and 1,288 kg, respectively, in the control plot, and were 3,876 kg, 294 kg and 1,853 kg, respectively, in the N 60 kg plot. Forage quality in terms of CP content, in vitro DM digestibility (IVDMD) and relative feed value (RFV) were also increased with N fertilization in both sites. In Cheonan, the CP content, IVDMD and RFV were 5.85%, 45.96% and 64.5 (grade 5), respectively, in the control plot, 6.58%, 51.27% and 72.3 (grade 5), respectively, in the N 50 kg plot, and 7.94%, 55.91% and 72.7 (grade 5), respectively, in the N 100 kg plot. In Ansan, the CP content, IVDMD and RFV were 6.30%, 45.98% and 70.2 (grade 5), respectively, in the control plot, and 7.59%, 47.80% and 78.3 (grade 4), respectively, in the N 60 kg plot. In conclusion, N fertilization of 60~100 kg/ha was desirable for greater forage production, with a higher quality of native Phragmites communis achievable. This should only be applied if the fertilization area is not located at a riverside/streamside or in riparian land where there is a high risk of water pollution by fertilization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3514-3523
• /
• 2009

Before 1990's, Korea had only few colleges that had film and film related majors. As Korean film industry started its marvelous improvement in both commercial and artistic phase, many colleges were interested in this new academic field. They hurried up to launch this new and profitable major; as a result, Korea now has more than hundred colleges and universities that has film related majors. Each college enumerates numbers of academic courses that may look reasonable; they have almost every course a fine film school should provide such as film theory, production, and performance in film. Lots of film schools offer lots of film courses; and they look alike. One unique thing in film major is its vast sub fields and categories. After you decide to study film, you have to select what specific field in film you want to study. Studying film theory and film production can be as different as majoring physics and physical education. The problem Korean colleges are dealing with is that there are too much film schools, and moreover those colleges have similar curriculums that just look like a department store that sells everything. One suggestion is specializing its curriculum in which the school can take advantages using their special conditions. San Francisco Art Institute is one of United States well known private film schools, but many people remember this school as a specialized film school in experimental film. San Francisco where this school is located has had many liberal and experimental artists as the city has been supporting and offering them an environment they can concentrate their work. Naturally, the school has world famous faculty members in experimental film, and students who want to study and make experimental film come to this school from all over the world because they know this school would be the best to study experimental film. There are many film schools in metro Los Angeles area; since its location near Hollywood, no wonder these schools concentrate on film producing and film production. They take advantage of their geographical location to hire film industry professional and to focus on commercial feature film productions. What we can do now to adjust the curriculum in film and film related major in Korean colleges is to adapt new standards in this changed film industry. One school can emphasize digital production while another school focuses on digital intermediate process. But if one school tries to both fields or all fields of film major just like we have done so far, the school could not take care of all the equipment and the faculty that the fields would need. Korean film schools should devide the field in film major and concentrate what they selected. Selection and concentration can be and should be applied in Korean film schools.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.135-135
• /
• 2018

천이금속 질화물 코팅은 우수한 기계적 특성들로 인해 공구 코팅으로 많이 사용 되어왔다. 그 중에서도 특히 Cr계 경질 코팅은 높은 경도와 낮은 표면조도, 우수한 마찰특성 등 뛰어난 기계적 특성을 나타내므로 공구 코팅으로의 적용 가능성이 크다. 그러나 최근 공구산업의 발전으로 인해 공구가 더욱 가혹한 환경에서 사용됨에 따라, 공구의 수명을 향상시키고 보호하기 위해 코팅의 높은 밀착력이 요구되고 있으며, 모재와 코팅 사이에 중간층을 합성함으로써 공구의 밀착력을 향상시키는 연구가 활발히 진행되고 있다. 이전 연구에서 모재/중간층/코팅간의 경도와 탄성계수 비율(H/E ratio)의 구배가 코팅의 밀착력에 큰 영향을 미치는 것으로 확인되었다. 그러므로, WC 모재와 Cr계 코팅의 중간값의 H/E ratio를 갖는 중간층의 합성을 통해 코팅의 밀착력을 향상시킬 수 있을 것으로 판단된다. 본 연구에서는, 코팅의 밀착력을 향상시키기 위해 다양한 중간층을 증착한 CrZrN, CrAlN 코팅을 비대칭 마그네트론 스퍼터링 장비를 이용하여 합성하였다. 모재로는 디스크 형상의 WC-6wt.%Co 시편을 사용하였고 Cr, Zr, Si, Al single 타겟을 이용하여 Cr, CrN, CrZrN, CrZrSiN 등의 중간층이 증착된 코팅을 합성했다. 코팅의 합금상, 경도 및 탄성계수, 미세조직 및 조성, 표면 조도을 확인하기 위해 X-ray diffractometer (XRD), Fischer scope, field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), atomic force microscopy를 사용하였고, 코팅의 밀착 특성을 분석하기 위해 scratch tester와 optical microscopy (OM)를 이용하였다. 코팅의 내열성을 확인하기 위해 코팅을 furnace에 넣어 공기중에서 500, 600, 700, 800, 900, $1,000^{\circ}C$로 30분 동안 annealing 한 후에 nano-indentation을 사용하여 경도를 측정하였다. CrZrN 및 CrAlN 코팅을 나노 인덴테이션으로 분석한 결과, 모든 코팅의 경도(33.4-35.8 GPa)와 탄성계수(384.1-391.4 GPa)는 중간층의 종류에 상관없이 비슷한 값을 보인 것으로 확인됐다. 그러나, 코팅의 마찰계수는 중간층의 종류에 따라 다른 값을 보였다. CrZrN 코팅의 경우 CrN 합금상 중간층을 갖을 때 가장 낮은 값을 보였으며, CrAlN 코팅의 경우 CrN/CrZrSiN 중간층을 증착하였을때 마찰계수는 0.34로 CrZrN 중간층을 증착하였을 때(0.41)에 비해 낮은 값을 보였다. 또한, 코팅의 마모율 및 마모폭도 비슷한 경향을 보인 것으로 보아, CrN/CrZrSiN 중간층을 합성한 CrAlN 코팅의 내마모성이 상대적으로 우수한 것으로 판단된다. 코팅의 밀착력의 경우도 마찰계수와 비슷한 경향을 보였다. 이것은 중간층의 H/E ratio가 코팅의 내마모성에 미치는 영향에 의한 결과로 사료된다. H/E ratio는 파단시의 최대 탄성 변형율로써, 모재/중간층/코팅의 H/E ratio 구배에 따라 코팅 내의 응력의 완화 정도가 변하게 된다. WC 모재 (H/E=0.040)와 CrAlN 코팅(H/E=0.089) 사이에서 CrN, CrZrSiN 중간층의 H/E ratio는 각각 0.076, 0.083으로 모재/중간층/코팅의 H/E ratio 구배가 점차 증가함을 확인 할 수 있었고, 일정 응력이 지속적으로 가해지면서 진행되는 마모시험중에 CrN과 CrZrSiN 중간층이 WC와 CrAlN 코팅 사이에서 코팅 내부의 응력구배를 완화시키는 역할을 함으로써 CrAlN 코팅의 내마모성이 향상된 것으로 판단된다. 모든 코팅을 열처리 후 경도 분석 결과, CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅은 $1,000^{\circ}C$까지 약 28GPa의 높은 경도를 유지한 것으로 확인 되었고, 이는 CrZrSiN 중간층 내에 존재하는 SiNx 비정질상의 우수한 내산화성에 의한 결과로 판단된다.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.111-120
• /
• 2007

The purpose of this study is to evaluate the effects of surface treatment and composition of reinforcement material on fracture strength of fiber reinforced composite inlay bridges. The materials used for this study were I-beam, U-beam TESCERA ATL system and ONE STEP(Bisco, IL, USA). Two kinds of surface treatments were used; the silane and the sandblast. The specimens were divided into 11 groups through the composition of reinforcing materials and the surface treatments. On the dentiform, supposing the missing of Maxillary second pre-molar and indirect composite inlay bridge cavities on adjacent first pre-molar disto-occlusal cavity, first molar mesio-occlusal cavity was prepared with conventional high-speed inlay bur. The reinforcing materials were placed on the proximal box space and build up the composite inlay bridge consequently. After the curing, specimen was set on the testing die with ZPC. Flexural force was applied with universal testing machine (EZ-tester; Shimadzu, Japan). at a cross-head speed of 1 mm/min until initial crack occurred. The data was analyzed using one-way ANOVA/Scheffes post-hoc test at 95% significance level. Groups using I-beam showed the highest fracture strengths (p<0.05) and there were no significant differences between each surface treatment (p>0.05) Most of the specimens in groups that used reinforcing material showed delamination. 1. The use of I-beam represented highest fracture strengths (p<0.05) 2. In groups only using silane as a surface treatment showed highest fracture strength, but there were no significant differences between other surface treatments (p>0.05). 3. The reinforcing materials affect the fracture strength and pattern of composites inlay bridge. 4 The holes at the U-beam did not increase the fracture strength of composites inlay bridge.