• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.117-121
• /
• 2003

다양한 형태의 작업을 수행하는 트랙터의 변속기에 대한 신뢰성을 확보하기 위해서는 장기간의 수명 시험이 요구된다. 이러한 수명 시험시간을 단축하기 위해서는 트랙터가 포장에서 이용되는 형태를 토대로 한 수명예측과 가속패턴을 작성하고 가속계수 결정하는 가속 시험법이 정립되어야 한다. (중략)

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.216-221
• /
• 1998

dynamic modelling method is applied to the driving simulation which has the calculable model of engine, transmission, vehicle. And driving pattern is used for database by actual tests and analyzed in neural network system. The simulation is compared to real test results and structures to the tracked vehicle powertrain.

• Tribology and Lubricants
• /
• v.30 no.2
• /
• pp.92-98
• /
• 2014

Transmission fluid film behaviors in the gap between the wet clutch pad and separator plate are analyzed using the CFD software ADINA. Three pattern groove designs are selected and are used to validate the fluid film behaviors based on the outlet flow in the gap when the wet clutch pad and separator plate are engaged. The main design goal for pattern grooves is faster engagement. In most cases, much of the outlet flow of transmission fluid in the gap occurs on the outer radius boundary due to the centrifugal force generated by the clutch pad circular motion. Groove patterns are created to ensure faster transmission fluid outlet flow in the direction of the inner radius boundary. Computational results of the selected groove patterns are compared.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.513-518
• /
• 2019

The non-destructive testing equipment using an eddy current was developed to check for defect in the vehicle transmission component. A defect master sample was made to test all types of defects that occur in the component and also an eddy current detector was manufactured and used to test and detect all kinds of defects. In addition, testing was held against the actual defective items to investigate the cause and type of defects, and a comparative study was conducted based on results from the examination. The software system of the eddy current detector was developed so that even a non-specialist can make assessment of detect in the component from the test results displayed on the monitor.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.857-864
• /
• 2004

In this paper, a new speed pattern generation method is proposed to offer various speed patterns for the traffic changers, with the comfortable driving and the rapid transportation speed that are two important factors to determine elevator speed pattern. To reduce the speed shift impulse, acceleration and deceleration times are appropriately adjusted to the elevator system when start and stop. In order to improve transportation capability, the jerk is also adjusted to the traffic change. Using fuzzy inference system with 2 input variables and 1 output, the elevator system controls precisely, with the proposed speed pattern.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.265-270
• /
• 2014

Frictional heat greatly influences the friction behaviors during clutch engagement. Therefore, the engagement of a wet or dry clutch is frequently not under control by the frictional heat. In a wet clutch, the frictional temperature also specially needs to be controlled, and in many cases, the clutch material is selected to prevent a temperature rise from the friction between friction pad and separator. However, only the selection of the clutch material cannot ensure sufficient control of the temperature rise by the friction. The groove pattern on a friction pad is designed for more flow rates of transmission fluid between the contact gap of clutch pad and separator for the cooling effect. In this work, grove patterns are designed for more flow rates out of the contact gap between friction pad and separator plate. Selected groove design shows the improvement flow rates of transmission fluid through both inner and outer radius, where most of the transmission fluid flows through the outer radius when the clutch is engaged due to the centrifugal force in conventional wet clutch groove. Several comparisons of the amounts of frictional heat generated on clutch pads are made in order to verify the decrease of the temperature rise according to the flow rates along the groove patterns.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.4 no.3
• /
• pp.32-48
• /
• 1994

This paper proposes the compensation algorithm of conventional shift pattern using fuzzy reasoning in automatic transmission vehicles. Recently, automatic transimssion vehicles are continually increasing because of theire ease to drive. Also users require the high performance which includes the smooth shift quality and shift scheduling that matches driver;s intentions. So the shift scheduling has been inproved significantly through the application of electronic control. But, in spite of this development, vehicles using conventional shift pattern are sometimes in discord with driver's intention on roads. In this paper, the paper, the proposed compensation algorithm makes a automatic transmission vehicle be able to select an optimal gear shifting time and position using fuzzy reasoning and make a vehicle driver feel confortable even when the vehicle runs on roads which is extremely changed. Therefore, a vehicle driver can expect to reduce the nimber of unnecessary gear shifting and expect the fuel efficiency high. To show usefulness of the proposed method, some simulation are made to compared with conventional gear shifting. Paper prosposes the compensation mehtod of conventional shift pattern using fuzzy reasoning for the purpose that a vehicle can select an optimal gerar shifting time and position in automatic vehicle. Though the conventional shift pattern has no pliability, vehicle driver can feel comfortable and can reduce the number of unnecessary gear shifting using the proposed method on variable road condition. Therefore, it can be expected the fuel efficiency.