• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.299-306
• /
• 2003

The SCM420 used mainly to automobile transmission gear has problems that it costs transmission gear maker much money in carburizing treatment. For this, it needs to alternate the existing material and heat treatment to new gear material and surface modification. For this, friction and wear experiment according to sliding speed and applied load was carried out to evaluate the wear resistance of two transmission gear materials with oxidation nitrocarburising and non-oxidation nitrocarburising NT100, The presumed wear volume was calculated with the image processing for evaluation of wear resistance of two transmission gear materials. The results show that the oxidation nitrocarburising has a distinguished wear resistance than non-oxidation nitrocarburising.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.164-170
• /
• 2008

A typical clutch system for automotive manual transmissions transfers hydraulic pressure generated by driver's pedal manipulation to the clutch diaphragm spring. The foot effort history during the period of push is different than the period of the clutch pedal's return. The effort or load difference is called clutch foot effort hysteresis. It is known that the hysteresis is caused by friction. The frictional force and moment are produced between various component contact points such as between the rubber seal and the inner wall inside the hydraulic cylinder and between the diaphragm spring and the pressure plate, etc. Understanding the clutch pedal foot effort hysteresis is essential for a clutch release system design and analysis. The dynamic model for a clutch release system is developed for the foot effort hysteresis prediction and a simulation analysis is performed to propose a tool for analysing a clutch system.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.33-38
• /
• 2010

As for an oil hydraulic vane pump of vehicle hydraulic systems, the highest of planning technique required by the acquisition of optimum profile data which can be available to predict noises and vibrations. Pressure pulsation may result in considerable vibration and noise of pump component as well as cavitation in hydraulic system. The influences of the discharge pressure and rotating speed of the vane on the dynamic pressure in chamber surrounding a vane have been investigated. It is very important to predict pressure pulsation in vane pump. This paper presents analysis of technique of vane pump for automatic transmission. The predicted result using AMESim model were good agreement with the experimentally obtained results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.327-327
• /
• 2010

자동차에서 실내음질은 구매결정 요소들 중의 하나로 그 중요성이 점차 증가하고 있다. 따라서 다양한 운전조건에서 운전자가 기대하는 실내음질의 기대 수준을 충족시켜야 한다. 소비자는 운전경험과 습관에 따라 기대하는 음질에 차이가 있고 소리에 대한 표현방식도 모호하기 때문에 이러한 주관적 특성을 하나의 통일된 표현으로 정의 하기가 어렵다. 그러나 지난 이십여 년 동안의 음질개발과 차량 실내소음 주관평가의 통계처리로 통일된 표현을 할 수 있었다. 나아가 심리음향학 및 신호처리기술의 발달과 꾸준한 음질연구결과로 소리특성을 객관적으로 나타내는 소리의 시각화가 가능하였으며, 운전자가 인식하는 주관평가와의 상관관계를 높여 차량의 대표적인 음질인자로 정량화하여 음질목표를 설정할 수 있었다. 실내소음의 구성은 엔진 투과음, 흡배기 소음, 바람 소음, 도로 기인 소음 등으로 다양하므로 소음원에 따라 음의 균형을 맞추어 조화로운 음질개발을 하는 것이 중요했다. 또한 차량 판매되는 지역에 따라 선호음이 상이하여 지역별 실내음질의 차별화가 필요했다. 궁극적으로는 운전자의 감성품질을 만족할 수 있도록 음을 제어하여 브랜드 사운드를 개발하고 있다. 이러한 실내음질을 달성하기 위한 방법으로 소음원과 전달경로에 대해 기여도를 분석하고, 경로를 구성하는 시스템 별로 세분화하여 시스템 목표를 설정하였다. 시스템 개발에 중요한 인자로 차량의 동강성 및 흡차음 성능을 들 수 있다. 특히 디젤차량의 비중이 큰 유럽업체의 차량의 동강성 및 흡차음 개발 능력은 높게 평가되고 있다. 이에 유럽의 부품전문회사가 가지고 있는 해석과 시험적인 개발 방법을 통하여 전달계 특성을 만족하기 위한 시스템의 동강성 및 흡차음 특성을 개발하고 있다. 차량음질 튜닝의 중요한 기법 중 하나로 흡배기 개발을 추진하고 있다. 친환경자동차인 하이브리드차량, 전기차량 및 연료전지차량의 경우 전기구동부품에서 발생하는 각종 이음 발생을 최소화 했다. 보행자를 보호하고 운전의 즐거움을 향상하기 위한 가상사운드 개발을 진행하고 있다. 회사 수익성 향상을 위한 원가절감 및 구조 경량화에 따른 음질악화와 연비 향상 및 배기가스 규제 강화로 고성능 고출력 엔진탑재에 따른 음질악화 요인을 극복해야 했다. 운전자의 청감은 차량의 운전성에 따라서도 크게 영향을 받게 되므로 엔진제어와 변속기제어를 통해 음질과 운전성이 조화를 이룰 수 있도록 개발하고 있다. 향후, 소음원에 따른 시스템 최적화 개발, 운전성과 음질 연계 개발과 친환경차량의 가상사운드 개발 등이 자동차 음질 개발의 중요한 이슈로 생각한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1865-1870
• /
• 2014

Torque converter is a complex turbomachine used to transfer power smoothly from an engine to a transmission by lock-up clutch. A torque converter consists of the hydrodynamic clutch device and the lock-up clutch device. The retaining plate and driven plate are part of the lock-up clutch. The lock-up clutch connects directly to achieve the improvement of efficiency and fuel consumption. In this paper, using structure analysis of stress distribution on the shape of the mechanical stopper on retaining plate. The shape of mechanical stopper has effect on the stress distribution of lock-up clutch.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.422-433
• /
• 2011

Market demand for hydro-mechanical transmission (HMT) for agricultural tractors has increased recently. To select a type of HMT satisfying design conditions, performance characteristics of 12 HMT types must be understood. This study was conducted to provide tractor engineers with a guideline to select the most appropriate HMT type for their design requirements. Characteristics on speed reduction ratio, power transmission efficiency, power regeneration, lock-up angular velocity, output torque ratio and torque ratio of planetary gear train axis of the 12 HMT types were investigated and presented as either formula or graphical forms. A guideline to select proper HMT type was also presented using 2 parameter: lock-up angular velocity (${\omega}_L$) and torque ratio of the planetary gear train axis. In addition, effect of gear ratio of the planetary gear train on the power transmission efficiency was investigated and a guideline to select the best gear ratio was also presented.

• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.108-117
• /
• 1996

In this paper we propose a Wavelet- based compression algorithm of HDTV video signals for the purpose of recording HDTV signals in the digital VTR. Comparing to the DCT- based compression method, which only yields unrecognizable DCT coefficients, the low frequency components of Wavelet coefficients maintain recognizable spatial domain information. So, it is more suitable for various VTR operations such as editing and multi-speed mode operations. Also, the adopted Wavelet filter can be Implemented with simple shift operations, which can reduce the computational complexities substantially. The quality of reconstructed HDTV signals with a 4:1 compression ratio turns out to be good enough for the studio use.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.244-254
• /
• 2002

To enhance the acceleration performance and fuel consumption rate of a vehicle, the torque converter is modified or newly-developed with reliable analysis model. Up to recently, the one dimensional performance model has been used for the analysis and design of torque converter. The model is described with constant parameters based on the concept of mean flow path. When it is used in practice, some experiential correction factors are needed to minimize tole estimated error. These factors have poor physical meaning and cannot be applied confidently to the other specification of torque converter. In this study, the detail dynamic model of torque converter is presented to establish the physical meaning of correction factors. To verify the validity of model, performance test was carried out with various input speed and oil temperature. The effect of oil temperature on the performance is analysed, and it is applied to the dynamic model. And, to obtain the internal flow pattern of torque converter, CFD(Computational Fluid Dyanmics) analysis is carried out on three-dimensional turbulent flow. Correction factors are determined from the internal flow pattern, and their variation is presented with the speed ratio of torque converter. Finally, the sensitivity of correction factors to the speed ratio is studied for the case of changing capacity factor with maintaining torque ratio.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1401-1409
• /
• 2007

This paper presents a detecting technique for the improvement in quality by appling the various vibrational characteristics theory. The object of this study is to objectively point out faulty gear by developing the program which can be used to analyze and predict the vibrational characteristics caused by gear wear, deformation and nick of auto-transmission. The fault detection methods by vibrational signal analysis of gear have been progressed in the various fields of industry. These methods have the advantage of being easy to attach the accelerometer without discontinuance of the structure. But not all the methods are efficient for finding early faults. So in the thesis, we completed development of the inspection system of vibration by appling the most efficient detecting methods and verified the system's reliability through experiments.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.996-1002
• /
• 2009

Elimination of squeal noise occurred during brake application is an important task for the improvement of comforts in an industrial forklift. In this paper, a test rig was developed which was possible for testing of brake noise and an experimental measurement on squeal noise was performed. The causes of the brake noise are identified by experimenting how the factors such as automatic transmission fluid and rpm of drive axle affect the squeal. In order to identify the squeal characteristics, the signal analyses for noise are performed by using frequency spectrums. Also, brake test using a forklift was carried out to confirm the reliability of test results by using a test rig comparing with the occurrence of squeal noise. Experimental results showed that the tendencies of occurrence of squeal noise are well agreed at two test methods by using the test rig and forklift.