• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.463-463
• /
• 2011

집속이온빔장치(Foucused Ion Beam)에서 사용하는 액체금속이온원(Liquid Metal Ion Source)은 고 전류밀도, 고 휘도, 낮은 에너지퍼짐 등 많은 장점이 있다. 대부분의 집속이온빔 장치에서 플라즈마 이온소스에 비해 빔의 직경이 작고 GFIS 보다 다루기 쉬워 액체금속이온원을 많이 사용하고 있다. 기존에 사용하던 액체금속이온원에 서프레셔라는 새로운 전극을 추가시켜 팁과 갈륨저장소, 서프레셔, 추출극 구조로 만들었다. 이 연구를 위해 RPA(Retarding Potential Analyser)를 제작 하였다. RPA는 두 개의 메쉬와 하나의 컬렉터로 이루어져 있으며, 액체금속이온과 플로팅 되어있는 RPA에 전압의 차이를 주기위해 베터리로 제작한 파워로 액체금속이온에 인가되는 전압에 + 90V, -90V까지 제어가 가능하게 만들었다. 본 연구에서는 서프레셔의 유무에 따른 액체금속이온원의 에너지 퍼짐에 대해 연구하였다. 추출극에 전압 변화를 주어 방출되는 전류를 5uA, 10uA, 15uA, 20uA로 변화시켜가며 RPA에서 측정되는 전류를 가지고 전류-전압의 관계를 보았고, 에너지 퍼짐정도를 알았다. 마찬가지로 서프레셔에 전압 변화를 주어 전류-전압 관계, 에너지 퍼짐정도를 알았다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.502-509
• /
• 2008

Wireless sensor networks consist of sensor nodes which are expected to be battery-powered and hard to replace or recharge. Thus, reducing the energy consumption of sensor nodes is an important design consideration in wireless sensor networks. For the implementation of energy-efficient MAC protocol, Sensor-MAC based on IEEE 802.11 protocol. In this paper, which has energy efficient scheduling, was proposed. In this paper, we propose Dynamic S-MAC that is dynamically operated by network-traffic states. Dynamic S-MAC protocol improves energy consumption of S-MAC due to change the frame length according to network-traffic states. Using NS-2 Simulation, we compare the performance of Dynamic S-MAC with S-MAC protocol.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.301-304
• /
• 2001

Wind power generation system is one of the most useful energy resource using natural environment. One of the biggest problem we encountered is toot the wind speed is fluctuating sharply according to the weather conditions rather than it is stable. In this paper we do the equivalent modeling the mechanical energy of wind power turbine according to wind speed into the synchronous generator. We analyse the equivalent modeling output part of rectifier into DC/DC converter input part theoretically. We analyse a battery charging characteristics for power storage enabling the supply of stable power to the load. We design a system and do the modeling of it analytically so that it supplies a stable power to the load by constructing a DC-AC inverter point. Also we make a small size model usable in actual wind power generation system of 30kw and make an experiment and confirm its validity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.478-490
• /
• 2015

Abundant data has been generated over the internet as the arrival of information age. To share the information, Wired, wireless network are required to transmit the data. Especially, In the wireless network which is using mobile device based on battery, energy consumption is growing due to uploading, downloading the abundant data on mobile device. In order to solve the problem, This paper addresses the protocol of the modified TCP congestion control that is being used for the most network protocol to save energy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.4
• /
• pp.158-164
• /
• 2023

The meaning of the diamond crystal structure and the formative beauty of the crystal form were designed from a new perspective and expressed in jewelry. In this study, we examined the literature on the crystal structure of diamonds and analyzed cases of jewelry design based on the formative characteristics of diamond crystal structure. we newly interpreted the meaning and value of diamond crystal structure, and studied the figurative design that can show the aesthetic effect of the crystal structure by designing the diamond crystal structure as jewelry. By presenting jewelry designs that take advantage of the symmetry effect of the diamond crystal structure and the repetition of the sculptural beauty, we hope that the fundamental beauty and cultural meaning of gemstones will be re-recognized.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.94-98
• /
• 2014

$LiCoO_2$ thin film has received diverse attention as cathodes material of thin-film micro-batteries. In this study, $LiCoO_2$ thin films were synthesized on Au substrates by sol-gel spin coating method and an annealing process. Their structures were studied using X-ray diffraction and Raman Spectroscopy. The particle morphologies of these thin films were observed by Scaning electron microscope. From the results of X-ray diffractometry and Raman Spectroscopy analyses, it was found that as-grown films had the structure of spinel (LT-$LiCoO_2$) and layered-Rock-salt (HT-$LiCoO_2$) at $550^{\circ}C$ and $750^{\circ}C$ respectively. The annealed films at $650^{\circ}C$ were presumed to be the mixed state of these two types. Throlugh the scanning electron microscope, It was estimated that the particle size in as-grown films at $750^{\circ}C$, were larger crystilline particle than in those at the other lower temperature and well distributed in the film.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.677-677
• /
• 2013

최근 석유에너지의 고갈과 휴대용 전자기기의 사용의 증가로 고효율의 배터리의 개발이 요구되고 있다. 생체칩에서 부터 전기자동차, 에너지 저장체까지 광범위한 산업군에 걸처 배터리의 개발이 되고 있어 시장규모의 계속적인 성장이 있을 것으로 전망하고 있다. 현재 상용되고 있는 음극 재료는 카본재료(이론 용량 372 mAh/g)이다. 이 카본재료의 특징은 값이 싸고, 표준 환원전위가 낮아 비교적 높은 전압을 낼 수 있다. 그러나 낮은 에너지밀도를 갖으므로 높은 에너지를 필요로 하는 차세대 산업군인 전기자동차 등에는 적합하지 않은 것으로 평가되고 있다. 그래서 더 높은 에너지 밀도를 갖는 다른 재료들에 대한 연구들이 활발히 이루어지고 있다. 본 연구에서는 음극 재료로서 주석을 선택해서 연구를 하였다. 카본계열의 음극재료의 질량당 이론 에너지 밀도는 372 mAh/g임에 반해 주석같은 경우는 약 991 mAh/g 정도의 비교적 큰 이론용량을 갖고 있다. 하지만, 주석 등 금속, 혹은 금속 합금을 음극재료로 사용할 경우 많은 양의 리튬이 삽입/탈착되면서 약 300% 이상의 부피변화가 있게 된다. 그러한 과정에서 주석이 분쇄되어 떨어지거나 전자를 제공받는 집전체로부터 떨어지게 되고, 이 과정에서 심각한 에너지 밀도의 손실이 일어나게 된다. 이러한 문제점들을 극복하기 위해 다음과 같은 구조들을 고안하여 도금 공정을 사용하여 음극재료를 제작하여 실험을 진행하게 되었다. 도금법은 대면적을 싼 가격으로 할 수 있으며 원하는 두께 및 모폴로지까지 쉽게 조절할 수 있다. 부피팽창에 의한 스트레스를 최소화하기 위해 도금법을 사용하여 나노구조를 만들어 그에 따른 전기화학적 특성 변화를 측정하였다. 다공성 필름인 AAO 디스크의 한 면에 구리를 sputtering 공정을 사용하여 0.5 um 두께의 seed layer 구리 박막을 형성하고 형성된 구리 박막 위에 도금공정을 이용하여 두껍게 구리를 증착함으로 구리 음극 집전체를 형성한다. 그 후 AAO 구조 안에 주석을 도금하면 AAO의 구조를 따라 주석 나노와이어가 형성이 된다. 마지막으로 NaOH로 AAO를 제거해주면 직경 200 nm, 길이 2 um 정도의 주석 나노와이어를 구리 집전체위에 만들 수 있었다. 배터리의 용량을 측정한 결과 안정한 싸이클 특성과 약 400 mAh/g의 에너지 밀도를 갖는 것으로 나타났다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.221-229
• /
• 2007

In this paper, we propose and analyze the optimized sleep mode for a mobile node (MN) in IEEE 802.16e wireless metropolitan area networks. Because a MN in a sleep mode specified in 802.16e specification should maintain state information with the base station currently attached, it must renew sleep state with a new base station after handover which leads to unnecessary waste of battery power. Noting that the mobility pattern of a MN is independent of call arrival patterns, we propose an optimized sleep mode to eliminate unnecessary standby period of a MN in sleep state after handover. We also propose an analytical model for the proposed scheme in terms of power consumption and the initial call response time. Simulation studies that compare the performance between the sleep mode and the optimized sleep mode show that our scheme marginally increases initial call response delay with the huge reduction in power consumption.

• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.103-108
• /
• 2006

Short-range wireless communication and networking technologies are becoming increasingly important in enabling useful mobile applications. for example, ZigBee technology is expected to provide low cost and low power connectivity for equipment that needs battery life as long as several months to several years. In addition, ZigBee can be implemented in mesh networks larger than is possible with Bluetooth. The main features of this ZigBee standard are network flexibility, low cost, very low power consumption, and low data rate in an adhoc self-organizing network among fixed, portable and moving devices. Home network/Home automation is one of the key market areas for Zigbee, with an example of a simple network This paper investigates the effect of short range wireless channel on the performance of Zigbee system and DSSS-BPSK signal transmission in AWGN, interference and Rician fading environments. And we investigate performance degradation due to interference and fading effects in short range wireless channel. In particular, the impacts of the fading and interference level on the bit error probability is shown in BER performance figures.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.1-15
• /
• 2010

The damage of safety accidents at home can be minimized by preventing accidents in advance as well as by coping with the accidents promptly through the help of safety management system. In this paper, we identify several services to prevent and cope with the accidents that may occur at home by leveraging sensors and wireless network technology available at home network environments. In order to provide these services, we propose a context-aware system for safety management at home. The proposed system awares the dangerous situations through the information collected by the sensors in home network environment. The proposed system tries to not only prevent the accidents but also to cope with the situations using the information of rescue targets and the location where the accident occurs. We evaluate the appropriateness of sensors by implementing the proposed environments. Through OPNET simulation experiments, we also measure the amount of network traffic in order to confirm that the bandwidth of IEEE 802.15.4 is enough for the proposed system. Finally, we determine more appropriate wireless data transmission mechanism with respect to the end-to-end delay and battery consumption for the proposed system.