• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.264-272
• /
• 1994

동력을 발생하거나 이를 이용하는 대부분의 기계장치는 회전하는 축계 장치 를 갖고 있는데 이들은 중량을 갖는 회전체와 이것을 지지하거나 연결하는 강성축과 베어링으로 구성되므로 진동형태에 따른 고유진동수를 나타낸다. 그 결과 축계 장치 가 운전되는 동안 발생하는 기진력이 축계 강도를 초과하거나 진동수가 시스템의 공진점에 일치하던지 가까우면 이들 진동에 의해 축계 장치에 부착되어 있는 카프링, 감속기어, 지지베어링, 밀봉씰, 공정볼트 등이 이상마모 또는 피로파괴의 원인이 되므로 설계시나 운전중에 이에 대한 진동원인들을 PC를 이용하여 현장운전자들이 쉽게 규명할 수 있도록 개발하고 발생되는 진동문제를 효과적으로 해결할 수 있는 진동 저감장치를 몇 가지 소걔하였다. 국내에서 제작되는 선박, 자동차, 발전프랜트 또는 여기에 설치되는 엔진의 진동저감울 위해 이들 소프트웨어와 하드웨어들은 국내 관련기업의 현장기술 지도를 위해 여러차례 활용된 바 있으며 이를 이용하므로 써 축계진동 저감기술 자립은 물론 국산화 제품의 성능향상에도 크게 기여할 수 있다고 본다.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.519-522
• /
• 2006

Experimental and computational studies on an turbopump inducer with and without a bearing strut were performed to evaluate the effects of a strut on the performance of an inducer. Global performance data such as head rise and efficiency, and detailed flow characteristics such as surface static pressures were measured and compared with computational results. Generally a good agreement is observed between experimental and computational results, but some discrepancies are observed due to complex flow features such as backflows at the inlet and strut/inducer interactions. For the flow rates where the backflow region is large, installing a strut enhanced the hydraulic performance of the inducer by diminishing the size of the backflows. The results also show that the strut has negligible effect on the suction performance of the inducer.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06b
• /
• pp.14-20
• /
• 1995

본 연구에서는 압축기내의 이상류, 즉 냉매와 오일의 혼합상태라 하는 특수한 환경에서 하중을 지지하고 있는 상하부 베어링에서의 윤활특성파악을 위하여, 압축기의 동역학해석 및 레이놀즈방정식을 이용, 베어링의 축심궤적을 수치해석에 의해 결정하고, 여러 운전조건에서 축심궤적의 변화를 살펴 보았다. 또한, 실험에서는 실제의 냉방시스템에 사용되고 있는 로터리 압축기의 축심궤적을 갭-센서를 이용하여 파악, 그 결과를 나타냈다.

• Tribology and Lubricants
• /
• v.27 no.2
• /
• pp.71-76
• /
• 2011

In this study, the nondimensional load capacity of water hydrodynamic journal bearings is calculated. A generalized coordinate formulation is applied to handle the complexity of bearing geometry. A window-based analysis program is developed to analysis the cylindrical hydrostatic bearings. Load capacities are calculated according to some design parameters such as clearance, diameter of orifice, size of recesses and temperature. The results are presented and discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.789-790
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.217-218
• /
• 2009

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.595-602
• /
• 2016

An automotive wheel bearing is important part that translates rotating motion and bears vehicle weight. Recently, in accordance with the demands for $CO_2$ emission reduction and fuel economy regulation, the requirements for the weight reduction and miniaturization of vehicles has increased. Therefore, life evaluation technology of the bearings has increased in necessity. Since the bearing life is affected by many parameters such as bearing geometry, bearing specifications, and vehicle specifications, it is difficult to predict. In this paper, the bearing life was tested by varying the applied load and rotation speed and comparing them with the basic rating life and modified rating life that were suggested in ISO standards. From the results, it was found that there was a difference between the test life and theoretical life and modified rating life than basic rating life was to be relatively well predicted by test life.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.437-442
• /
• 2013

In recent times, surface texturing methods have been widely applied to reduce friction and improve the reliability of machine components such as parallel thrust bearings, mechanical face seals, and piston rings. In this study, a numerical analysis is carried out to investigate the effect of uniformly spaced hemispherical dimples on the lubrication characteristics of a slider bearing using a commercial computational fluid dynamics (CFD) code, FLUENT. The pressure distributions, load capacity, leakage flowrate, and friction force are strongly affected by the dimple diameter and the number of dimples. In particular, the load capacity and friction force decrease linearly with the dimple density whereas the leakage increases. These results can be used for designing the optimum dimple characteristics in order to improve the lubrication performance of slider bearings, for which further studies are required.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.755-763
• /
• 2002

Multispan simply supported bridges and multispan continuous bridges take a large portion of bridges in Central and Southeastern United Sates. The superstructure of the bridges are supported by steel rocker bearings. In general, the rocker bearings are modeled with ideal rollers or Coulomb fricition in seismic analysis. However, the rocker bearings have rocking action on pintles after rolling some distance. This rocking action may have considerable effect on the seismic performance of bridges. This study compares the effect of expansion rocker bearings models on a multispan simply supported and a multispan continuous bridge. Since the ideal roller model produces larger responses than the rocking model, its use is undesirable. However, the fricition and hardening model does not have much difference from the responses of the rocking model. In addition, the use of the tow models is convenient in seismic analyses of bridges. Although the rocking model can obtain more exact responses, its behavior is complicated and it may induce the conversion problem in time history analysis because it includes the abrupt changing of stiffiness. The friction and hardening model of expansion rocker bearings is therefore recommended in sesismic analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.318-318
• /
• 2004

원통 연삭기(cylindrical grinding machine)는 원통형 공작물을 센터나 척으로 지지하면서 연삭 공정을 수행하기 때문에 연속적인 작업이 어렵지만, 무심 연삭기(centerless grinding machine)는 원통형 공작물을 받침판으로 지지하면서 연삭 숫돌(grinding wheel)과 조정 숫돌(regulating wheel)로 연삭 공정과 축방향 이송을 동시에 수행하기 때문에 연속적인 작업이 가능하다. 특히 고정밀 부품을 작업자의 숙련도와 무관하게 고능률적으로 가공할 수 있는 무심 연삭기는 구름 베어링, 축, 피스톤 핀 등과 같은 고정밀 기계류 부품들을 대량 연삭하기 위한 용도로 많이 사용되어 왔다.(중략)