• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1231-1237
• /
• 2014

군용 차량의 경우 야지 주행에 대한 성능 시험이 필수적인데 실차 시험의 경우 비용과 시간에 의한 제약을 받게 되므로, 시뮬레이션을 통한 성능 분석이 효율적이다. 본 연구에서는 상용 다물체 해석프로그램인 MSC.ADAMS 를 이용하여 차량 모델을 개발한다. 타이어 수직 강성 시험을 수행하고 FTire 모델에 반영하여 타이어 모델을 생성한다. 댐퍼의 경우 비선형 특성 시험을 통해 얻은 결과를 반영하여 댐퍼를 모델링 하였으며, 겹판 스프링은 빔 요소 모델로 차량 모델을 구성한다. 단순 장애물 통과 시험 및 파형로 통과 시험을 수행하고 가속도 응답 및 휠 하중 응답 분석을 통해 차량 모델의 신뢰성을 검증하였다.

• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1202-1210
• /
• 2005

This paper develops a computer model for estimating the bump characterisitcs of a cat)over type large-sized truck. The truck is composed of front and rear suspension systems, a frame, a cab, and ten tires. The computer model is developed using MSC.ADAMS. A shock absorber, a rubber bush, and a leaf spring affect a lot on the dynamic characteristic of the vehicle. Their stiffness and damping coefficient are measured and used as input data of the computer model. Leaf springs in the front and rear suspension systems are modeled by dividing them three links and joining them with joints. To improve the reliability of the developed computer model, the frame is considered as a flexible body. Thus, the frame is modeled by finite elements using MSC.PATRAN. A mode analysis is performed with the frame model using MSC.NASTRAN in order to link the frame model to the computer model. To verify the reliability of the developed computer model, a double wheel bump test is performed with an actual vehicle. In the double wheel bump, vortical displacement, velocity, acceleration are measured. Those test results are compared with the simulation results.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2048-2055
• /
• 2001

This paper develops a computational model for estimating the ride quality of a cabover type large-sized truck in a double wheel bumpy ride test. The computational model is developed using ADAMS. To verify the developed model, an actual vehicle double wheel bumpy ride test is performed. In the test, the vehicle maintains a straight course with a constant velocity such that the front two wheels are passed the bump at the same time. The bump has the height of 60mm, and the width of 550mm. In the test, four velocities are used. They are 10kph, 20kph, 30kph and 40kph. Since the large-sized truck's center of gravity location is high, and its weight is heavy, it is a quite severe test condition to perform the test with more than 30kph velocity. In the test, vertical accelerations on the floor of the cab are measured. The measured accelerations are compared to the simulation results. From the comparison, it is shown that the developed model can predict not only the measured acceleration's tendency but also peak accelerations quite well. In this paper, the validated model is utilized to compare the ride quality between a vehicle with a multi-leaf spring and a vehicle with a tapered leaf spring in the front suspension system in a double bumpy ride test.