• 말소리와 음성과학
• /
• 제4권4호
• /
• pp.45-52
• /
• 2012

The purpose of this paper is to measure the first two vowel formants of the ten young female speakers from the Buckeye Corpus of Conversational Speech [1] automatically and then to analyze various potential factors that may affect the formant distribution of the eight peripheral vowels of English. The factors that were analyzed included the place of articulation, the content versus function word information, the syllabic stress information, the location in a word, the location in an utterance, the speech rate of the three consecutive words, and the word frequency in the corpus. The results indicate that the overall formant patterns of the female speakers were similar to those of earlier works. The effects of the factors on the realization of the two formants were also similar to those from the male speakers with minor differences.

• 말소리와 음성과학
• /
• 제4권4호
• /
• pp.29-35
• /
• 2012

The purpose of this study was to measure the first two vowel formants of the forty male and female speakers (twenty young vs. old male speakers and twenty young vs. old female speakers) from the Buckeye Corpus of Conversational Speech and to examine the vowel formant changes across two generations (younger vs. older). The results indicated that the vowel space of the younger generation (in their thirties or less) shifted to the lower left position compared to those of the older generation (in their forties or more) in both male and female speakers. When the results were compared to those of Peterson & Barney (1952), it appears that differences can be found in the size of the vowel spaces through time.

• 말소리와 음성과학
• /
• 제4권2호
• /
• pp.33-40
• /
• 2012

The purpose of this paper is to investigate the voice onset time (VOT) of the English voiceless stops [p, t, k] found in the Buckeye Corpus of Conversational Speech [1]. Three young female speakers were chosen for this study and their VOT values were semi-automatically extracted along with other factors. The factors used for the analysis were place of articulation, location in word, syllabic stress, content word or not, word frequency calculated from the corpus, and the speech rate expressed in syllables per second. Results showed that, for the three places of articulation of each speaker, all the factors had a statistically significant effect on the VOT values. This paper has significance in that the materials used for the analysis were from a corpus of spontaneous natural English speech.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.31-33
• /
• 2008

A novel lossless current sensing technique for a synchronous buck converter is presented. The inductor DCR method is generally used as a low cost and lossless current sensing technique of DC/DC converters. It is however difficult to obtain the accurate current value for the conventional DCR method because the inductor resistance varies depending on the operating frequency. In order to overcome this problem, an improved current sensing technique is proposed, which has the separated DC and AC sensing circuits. The concept and operation of the proposed method are explained and the experimental results are provided to show its effectiveness.

• 전력전자학회논문지
• /
• 제23권2호
• /
• pp.121-128
• /
• 2018

This work proposes a simple control method of a buck-type active power decoupling circuit that can minimize the ripple values in the dc link voltage. The proposed method utilizes a simplified duty calculation method and an optimal compensation gain tracking algorithm with variable-step approach. Thus, the dc link voltage ripple can be effectively reduced through the proposed method along with rapid response in tracking the optimum compensation gain. Moreover, the proposed method has better dynamic responses in the load fluctuation or abnormal situation. MATLAB/Simulink simulation and hardware-in-the-loop-simulation(HILS)-based experimental results are presented to validate the effectiveness of the proposed control method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.294-295
• /
• 2018

유도가열은 전자기 유도 현상을 이용하여 금속체를 직접 가열하는 방식이며 높은 변환 효율로 전기에너지를 열에너지로 변환할 있다. 이로 인해 금속의 단조, 용해, 표면경화, 풀림 등 여러 응용분야를 통해 철강 및 기계 산업에 기여하고 있다. 단조용 유도가열기 전원장치는 높은 전력용량을 사용하여 주로 SCR을 이용한 위상제어 정류기를 적용한다. 하지만 입력단의 저 역률 및 전류의 THD가 높은 단점을 가진다. 따라서 본 논문에서는 이러한 단점을 보안하기 위해 단조용 유도가열 작업에 맞는 인터리브드 방식의 벅 컨버터와 전류원 인버터를 사용한 고효율 유도가열 전원장치를 제안한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.326-327
• /
• 2018

본 논문에서는 단상전력변환시스템에서 발생하는 고유의 2차 리플 전력 문제를 해결하고 dc 캐패시터의 저감을 위한 능동 전력 디커플링 회로의 설계방법을 제시한다. 일반적인 수동 전력 디커플링 방법, 벅-타입 방법 및 커패시터 분할 타입 방법의 능동 전력 디커플링 회로들에서 필요한 최소의 커패시턴스를 계산하는 방법을 제시하고, 같은 조건에서 리플 전력 디커플링 성능을 분석한다. 도출된 최소한의 커패시턴스를 적용한 디커플링 회로의 성능은 MATLAB 시뮬레이션 결과를 통해 비교 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.279-280
• /
• 2013

본 논문에서는 3상 양방향 절연형 인터리브드 DC-DC 컨버터의 병렬 제어기법에 대해 기술한다. 대전력 적용 시, DC-DC 컨버터를 단독으로 운전하는 것이 아닌 병렬로 연결하여 운전을 하게 되는데 이때 발생하는 전류의 불평형을 해결하기 위하여 부스트 모드와 벅 모드에서 저전압측의 전압을 제어하는 전압제어기에 각 컨버터의 전류차를 보상하는 전류제어기를 제안하였며 각 모드에서 전류의 불평형이 보상되는 것을 실험을 통해 검증하였다.

• 전력전자학회논문지
• /
• 제25권5호
• /
• pp.350-357
• /
• 2020

This study presents the design of an 18 kW two-phase interleaved buck converter that uses a coupled inductor for an electric vehicle rapid charger. The designs of a two-phase coupled inductor for current ripple and physical size reduction and a two-phase interleaved buck converter based on silicon carbide metal - oxide - semiconductor field-effect transistor for high efficiency were described in detail. The operating principle of the two-phase interleaved buck converter was analyzed, and the coupled inductor was investigated using a magnetized equivalent circuit. Simulation and experiments were conducted to verify the validity of the proposed two-phase interleaved buck converter, and the theoretical design method and experimental results were confirmed.

• 한국전기전자재료학회논문지
• /
• 제11권9호
• /
• pp.746-751
• /
• 1998

There are several methods capable of determining he magnitude of optical anisotropy, such as spectrometric ellipsometry and polarized light reflectometry. The interference method is estimated to be no influence of surface scattering. The magnitude of anisotropy is a-As/sub 40/Ge/sub 10/S/sub 35/Se/sub 15/ thin film is analyzed by the reflection interference analysis method based on the difference depending on a phase of s- and p-polarized light. The theoretically analyzed value is compared with the result obtained by the measured technique.