• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.177-178
• /
• 2021

우리나라 차량의 수는 매년 증가한다. 한 가구당 2대 이상의 차량을 가지고 있는 경우는 드물지 않다. 이는 도로의 포화를 발생시키고 교통사고의 원인이 된다. 본 연구에서는 안전성을 더욱 증가시키는 것을 전제로 아두이노를 이용한 초음파 센서와 라즈베리를 통한 블루투스 기술을 통해 LED 패널에 적용하고자 한다. 현재 많은 차량에는 후방 감지 센서와 차량 후방에서 다가오는 차량을 감지하는 센서 등을 사용하고 있다. 이 기술들은 운전자를 보호하는 장치이지만 모두 개인적으로 사용되는 장치이므로 다른 운전자를 보호하기 위한 장치가 필요하다. 또한, 이러한 시스템이 설치되어 있지 않은 차량이 많다. 추가로 설치하기 위해서 보다 큰 비용을 내야 하므로 적은 비용에 비해 큰 효율을 발생할 수 있는 가성비 좋은 장치가 필요하다. 본 논문은 이러한 문제점들을 개선하기 위해 버스에 장착된 LED 패널과 도로정비 차량 후방에 장착된 LED 패널에서 아이디어에 착안하여 '차량용 후방 안전 LED 패널' 기술을 제안한다. 기존에 글자를 이용해 단순히 의사소통이 가능한 LED 패널을 아두이노와 라즈베리 파이를 통해 사용자가 출력하고 싶은 문구를 실시간으로 출력하여 다른 운전자에게 정보를 전달할 수 있다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.87-93
• /
• 2007

Over the years, Advanced Public Transportation System (APTS) has been implemented to manage and operate public transportation system. With the expanding mass spatio-temporal data such as comprehensive spatial information of each individual passenger and public transportation vehicle, it has been required to consolidate and analyze these multiple data sets from various sources. This paper demonstrates how GIS is utilized for the consolidation of massive transit related spatio-temporal information. And it presents effective applications to improve transit planning process and support transit related decision-making activities. GIS based system is used to combine multi-agents' data in the areas of transit operation and individual transit ride and transfer management. Due to the unique comprehensiveness and the level of detail of the data provide by the Seoul Transit system, this GIS based information consolidation is the first in its class. Based on the integrated database, this paper describes the effective and efficient GIS based analysis deployed in a transportation system planning process. The data integration systems and analytic models developed in this paper can be transferred and applied by any municipal governments provided that the appropriate data is available.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.86-92
• /
• 2016

Recently, solar module is installed in crowded areas to offers services so that people can charge their smartphones or tablets. However, the burden in terms of cost is high to install in areas where utilization ratio is low and installation is difficult in limited spaces. In this paper, a system for collecting and providing the optical power is proposed from the analysis about the person that receives service in each area using the real-time data provided by the state and collected from the actual environment as well as considering the waiting time and the solar charging time in different environments. As a result, This study shows that charge was not delayed since collecting power exceeds charging power. Smartphone was fully charged in ninety-five minutes. we confirmed that with one smartphone, it can be charged a approximately fifty percent of the battery in between ten to twenty minutes, with multiple units they can be charged a approximately twenty percent of the battery in between ten to twenty minutes.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.105-118
• /
• 2022

The demand for information related to 3D spatial objects model in metaverse, smart cities, digital twins, autonomous vehicles, urban air mobility will be increased. 3D model construction for spatial objects is possible with various equipments such as satellite-, aerial-, ground platforms and technologies such as modeling, artificial intelligence, image matching. However, it is not easy to quickly detect and convert spatial objects that need updating. In this study, based on spatial information (features) and attributes, using matching elements such as address code, number of floors, building name, and area, the converged building DB and the detected building DB are constructed. Both to support above and to verify the suitability of object selection that needs to be updated, one system prototype was developed. When constructing the converged building DB, the convergence of spatial information and attributes was impossible or failed in some buildings, and the matching rate was low at about 80%. It is believed that this is due to omitting of attributes about many building objects, especially in the pilot test area. This system prototype will support the establishment of an efficient drone shooting plan for the rapid update of 3D spatial objects, thereby preventing duplication and unnecessary construction of spatial objects, thereby greatly contributing to object improvement and cost reduction.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.1-8
• /
• 2020

Communication between system modules is applied using the Modbus protocol in industrial sites including smart factories, industrial drones, building energy management systems, PLCs, ships, trains, and airplanes. The existing Modbus was used for serial communication, but the recent Modbus protocol is used for TCP/IP communication.The Modbus protocol supports RTU, TCP and ASCII, and implements and uses protocols in embedded systems. However, the transmission I/O devices for RTU, TCP, and ASCII-based protocols may differ. For example, RTU and ASCII communications transmit on a serial-based communication protocol, but in some cases, Ethernet TCP/IP transmission is required. In particular, since the C language (object-oriented) is used in embedded systems, the complexity of source code related to I/O registers increases. In this study, we designed software that can logically separate I/O functions from embedded devices, and designed the execution logic of each instance requiring I/O processing through a delegate class instance with Modbus RTU, TCP, and ASCII protocol generation. We designed and experimented with software that can separate communication I/O processing and logical execution logic for each instance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.713-720
• /
• 2012

Recently, holography has received much attention as the next generation visual technology. Hologram is obtained by the optical capturing, but in recent years it is mainly produced by the method using computer. This method is named by computer generated hologram (CGH). Since CGH requires huge computational amount, if it is implemented by S/W it can't work in real time. Therefore it should use FPGA or GPU for real time operation. If it is implemented in the type of H/W, it can't obtain the same quality as S/W due to the bit limitation of the internal system. In this paper, we analyze the bit width for minimizing the degradation of the hologram and reducing more hardware resources and propose guidelines for H/W implementation of CGH. To do this, we performs fixed-points simulations according to main internal variables and arithmetics, analyze the numerical and visual results, and present the optimal bit width according to application fields.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.95-105
• /
• 1995

An appendix to the MAP 3.0 specification notes that there are primary advantages to use of fiber optics : noise immunity, ability to run in difficult electrical environments, safety and high data rates. All of these may be quite useful in various manufacturing environments. In this paper, we study on construction schmes for a fiber-based 802.4 MAP system including the use of both bus and star topologies. We suggest passive star network and FDDI network for manufacturing environment. And then, we propose the FDDI protocol including the use a dual ring topology running at 100 Mbps to physical and datalink layer of MAT specification and analysis it's protocol and topology for abilities in manufacturing environments, We evaluate about applications service, time-critical processing and topology of two models in manufacturing environment.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.277-286
• /
• 2000

Switch-based network is suitable for the environment of demanding high performance network. Traditional shared-medium Local Area Networks(LANs) do not provide sufficient throughput and latency. Specially, communication performance is more important with multimedia application. In these environments, switch-based network results in high performance. A kind of switch-based network provides higher bandwidth and low latency. Thus high-speed switch is essential to build switch-based LANs. An effective switch design is the most important factor of the switch-based network performance, and is required for the multicast message processing. In the previous cut-through switching technique, switch element reconfiguration has the capability of multicasting and deadlock-free. However, it has problems of low throughput as well as large scale of switch. Therfore, effective multicating can be implemented by using divided hardware unicast and multicast. The objective of this thesis is to suggest switch configuration with these features.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.3
• /
• pp.25-33
• /
• 2007

The local governments of major cities in Korea are giving focus on public transportation to reduce congestion and improve accessibility in city areas. In this regards, the proper measurement of accessibility is now a key policy requirement for reorganizing the public transport network. Public transport routing problems, however, are considered to be highly complicated since a multi-mode travel generates different combinations of accessibility. While most of the previous research efforts on measuring transport accessibility are found at zone-levels, an alternative approach at a finer scale such as bus links and stops is presented in this study. We proposes a method to compute the optimal route choice of origin-destination pairs and measure the accessibility of the chosen modes combination based on topological configuration. The genetic algorithm is used for the computation of the journey paths, whereas the space syntax theory is used for the accessibility. This study used node-link data in GIS instead of axial lines which are manually drawn in space syntax. The resulting accessibilities of bus stops are calibrated by O-D survey data and the proposed process is tested on a CBD of Seoul.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.529-534
• /
• 2020

The development of civilization is in line with evolution of cities and transportation technology caused by industrialization. Up to now, a city has been developed owing to transportation cost reduction and needs for land utilization as a limited core business district. Continuous increase of urban population density has accompanied by lots of problems socioeconomically such as rise of land value, traffic congestion, gap between the rich and poor, air pollution, etc. Those issues are difficult to be solved in existing city ecosystem. However, a clue for solving the problems could be found in there. The design of Seoul mid-night bus route was from analysis of movement of people in the rural area by using ICT so that a city ecosystem should be firstly analyzed for solving rural issues. If the cause of those is found, big data platform construction is required to raise the life quality of citizen and the problems could be solved. Big data should be located in the middle of the platform connected with every element of city based on ICT for real-time collection, analysis and application. This paper addresses construction of big data platform and its application for sustainable smart city.