• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.538-547
• /
• 2004

Optical Burst Switched (OBS) networks usually employ one-way reservation by sending a burst control packet (BCP) with a specific offset time, before transmitting each data burst frame (BDF). Therefore, The quality of service may be degraded because contentions may lead to loss of BDFs. Especially, this phenomenon becomes more serious when burst size is longer. This necessitates an effective method of prevention to avoid burst collision in nodes. OBS networks can employ several methods to avoid such burst losses. One is that burst size is cut short to reduce burst loss probability during scheduling time. In this paper, we evaluate the burst generation and transmission using Sub-Carrier Multiplexting (SCM) in OBS networks. We propose an appropriate burst assembly architecture and transmission scheme based on SCM in OBS networks. The performance of SCM in OBS networks is examined in terms of number of Sub-Carriers per wavelength, burst loss probability, throughput, and total bandwidth of an optical fiber.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.109-116
• /
• 2004

Optical Burst Switching (OBS) technology has drawn much attention as a promising solution for IP/WDM networks. OBS has the features such as the offset time, the delayed reservation and the burst assembly. In particular, the burst assembly, which assembles IP packets into the data bursts, has a great impact on the performance of OBS network. In this paper, we compare the performance of three different burst assembly schemes and investigate their impact on the performance of OBS network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.72-84
• /
• 2005

Optical burst switching networks usually employ one-way reservation by sending a burst control packet with a specific offset time, before transmitting each data burst Same. Due to such a Property, burst-contentions occur when multiple bursts contend for the same wavelength in the same output link simultaneously in a node, leading to burst losses, eventually degrading the quality of service. Therefore, in this paper, we propose a dynamic routing algorithm using minimum local state information in order to decrease burst-contentions. In this proposed scheme, if burst loss rate exceeds a threshold value at a certain node, a new alternative routing path is chosen according to burst priority and location of burst generation, which enables the contending bursts to detour around the congested link. Moreover, for reducing the effect of sending bursts on the primary path due to the alternative path, we also apply a minimum path-cost based routing on link-cost concept. Our simulation results show that proposed scheme improves the network performance in terms of burst loss probability and throughput by comparing with conventional one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.178-183
• /
• 2005

In Optical Burst Switching(OBS) networks, burst loss due to contention significantly affects the performance of networks. Even if many contention resolution schemes have been proposed, most of them have focused mainly on passively resolving contentions instead of avoiding them. In this paper, we propose an active contention avoidance scheme which controls a burst sending rate according to traffic load and burst loss in a network. Simulation results show that the proposed scheme can more effectively reduce the burst loss rate compared to existing OBS model with and without burst sending rate control, and at the same time guarantees throughput.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.136-144
• /
• 2003

In this paper, we propose a scheme that can control the loss probability of low priority class bursts by dynamically adjusting the assembly threshold of low priority class. The key ideas is that the loss Probability of the longer burst increases as the load increases, thus reduced low priority class burst length decreases the loss priority at high traffic load. To achieve this aim, we first derive the relation among the loss probability, the assembly threshold, and the traffic load. In this paper we derive the relation by curve fitting on the simulation results. The ingress edge routers periodically or by event-driven receives the proper corresponding assembly threshold information from the core routers. This assembly threshold is calculated from the derived relation so that the required loss probability of the low priority class bursts in the network is satisfied. The simulation results show that the proposed scheme performs well to meet the loss probability target as expected.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8B
• /
• pp.514-524
• /
• 2005

In optical burst switching(OBS) networks, the ingress edge router assembles packets in the same class queue into the appropriate size of burst. A burst control packet(BCP) is generated for channel reservation of corresponding data burst and sent earlier than the corresponding data burst with an offset time. Offset time is determined considering the number of hops from source to destination and the required quality of service(QoS). After offset time, the burst data is passed through tile pre-configured optical switches without any O/E/O conversion. But a failure in OBS networks may lead to the loss of bursts until the ingress nodes receive the failure indication signal. This results in a significant degradation in QoS. Therefore, in this paper, we propose a fault-tolerant node architecture based on sub-carrier multiplexing to reduce the effects of failure in OBS networks. The Performance of the proposed fault-tolerant node architecture exhibits considerable improvement as compared with the previous ones.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.94-105
• /
• 2003

OBS(Optical Burst Switching) networks which decouple the burst from its header has characteristic one-way reservation. Therefore, the fault of a fiber link may lead to the magnitude of burst loss. Since sending a header packet and using an offset time before the transmission of the corresponding burst. In this paper, we analysis a offset time based on the burst loss rate resulting from only link failure and by applying the restoration schemes in an optical burst switching networks. The simulation results in terms of the effect of a offset time is evaluated in our network model to verify that comparing the numerical analysis with simulation result. Finally, and through these results, We propose the new restoration scheme based on offset time considered Quality of Service.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.1-3
• /
• 2003

OBS망에서 버스트의 충돌로 인한 버스트의 drop은 TCP의 성능에 중요한 영향을 끼치나, 기존의 drop policy에서는 이를 고려하지 않으며 TCP에 대한 연구로는 버스트의 assembling이 주를 이루고 있다. 본 논문에서는 OBS망에서 TCP의 재전송 문제를 drop policy와 연계하여 그 성능을 향상시키고자 한다. 본 논문에서 제안하는 drop policy는 버스트의 재전송 횟수가 더 작은 버스트를 drop시키는 TCP 기반 DP이다. TCP 기반 DP 모델과 일반적인 DP 모델의 성능을 ns­2를 이용한 시뮬레이션을 통해 평가하며, 이 때 시간의 변화에 따른 TCP throughput과 패킷의 drop rate을 비교 분석한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.214-216
• /
• 2003

아날로그 NTSC 비디오 디코더 신호를 디코딩하여 디지털화된 컬러 값을 얻기 위해서는 컬러 버스트 신호를 동기화 해야 한다. 이 버스트 신호를 이용하여 Y. I. O의 값을 분리하기 때문이다. 아날로그 디코더의 경우에는 내부에 버스트 신호와 동기화 한 클럭을 PLL이나 DLL등을 이용하여 발생시켜서 I의 위치를 알아낸다. 비디오 신호 해독을 위한 전용의 PLL을 위해 아날로그 방식의 VLSI설계를 하는 것은 많은 노력이 들어갈 뿐만 아니라 특정 Fab에 종속되어 전체 칩의 이식성을 떨어뜨리게 된다. 본 논문에서는 아날로그 PLL이 없이도 디지털 입력데이터의 산술 연산을 통해서 컬러 버스트 동기화를 검출하는 방법을 제안한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.457-459
• /
• 2005

OBS(Optical Burst Switching) 망에서 우선 순위를 보장해 주기 위해 채널 선정 방식(preemptive channel reservation scheme)이 제안되어 왔다. 채널 선점으로 인해 drop된 버스트의 크기가 OBS 망의 전체 성능에 영향을 끼치는 요소인데도 불구하고 기존의 채널 선점 방식은 선점될 채널 선택 시에 버스트의 채널 사용 시간(elapsed time)만을 고려하고 있다. 따라서 본 논문에서는 각 버스트의 채널 사용 시간과 버스트 길이의 합이 작은 채널을 선택하는 선점 방식으로써 Length-based Smallest Elapsed time Selection(LSE)을 제안한다 시뮬레이션을 통하여 제안하는 LSE 방식이 기존의 SE(Smallest Elapsed time)에 비해서 버스트 손실 성능 면에서 우수함을 알 수 있었다.