• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1445-1451
• /
• 2011

Pneumatic valves are widely used parts that have the ability to control the air supplied to automation systems. However, if failure occurs in a pneumatic valve, it may affect the entire system and could lead to huge losses, depending on the characteristics of the system at the time of failure. Because of this significant risk and the level of consumer demand for reliability, there has been much study on ensuring the reliability of products by predicting valve lifetime distributions and degradation characteristics. In this paper, in order to determine the main factors useful for predicting the lifetime of a pneumatic valve, the scale parameter and $B_{10}$ life time value of the widely used plug-in-type pneumatic manifold valves were measured using complete observational data on the valve lifetimes. And also the property of life distribution has been distribution-suitabilityreviewed by correlation coefficients, the degradation characteristics of valve has been presented by the result of analysis through dynamic response time test and leakage test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.157-164
• /
• 2017

A parallel slide gate valve (PSGV) is located between the heat recovery steam generator (HRSG) and the steam turbine in a combined cycle power plant (CCPP). It is used to control the flow of steam and runs with repetitive operations such as startups, load changes, and shutdowns during its operation period. Therefore, it is necessary to evaluate the fatigue damage and the structural integrity under a large compressive thermal stress due to the temperature difference through the valve wall thickness during the startup operations. In this paper, the thermal-structural analysis and the fatigue life evaluation of a 16-inch PSGV, which is installed on the HP steam line, is performed according to the fatigue life assessment method described in the ASME B&PVC VIII-2; the method uses the equivalent stress from the elastic stress analysis.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.160-166
• /
• 2014

The shutoff valve of a Liquid Rocket Engines (LRE) controls the flow of propellant between turbo-pump and combustion devices of LRE using pilot pressure and spring force. The shutoff valve is closed when the pilot pressure is removed from the diaphragm type actuator. During designing process of life cycle is when should be analyzed according to the characteristics of forces with respect to the opening and closing of diaphragm actuator. A valve has been designed to adjust the control pressure which is required to open a poppet and to determine the working fluid pressure at which a valve starts to close. During flow capacity test under room temperature as a part of life cycle tests, the leakage in diaphragm was occurred due to the leakage of sheet welding sections. The operating cycle of the diaphragm type actuator is about 61 times with 22 MPa of pilot pressure.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.111-116
• /
• 2001

본 논문에서는 유체기계에서 사용되고 있는 홀로제트밸브의 감속기에 대하여 APM S/W로 시뮬레이션(simulation) 하였다. 수압과 외부의 힘에 의해서 전달되는 베벨기어의 설계검증 및 재설계 관하여 시뮬레이션을 하였다. 도면의 재원을 변경시키지 않고 기어의 수명을 시뮬레이션한 결과 SM45C를 Martempering하여 사용할 시 기어의 수명이 짧아 적절치 못하였고 고주파열처리강, 질화열처리강을 사용할 경우 기어의 수명시간이 12,957-20,983시간 이였고 침탄강을 사용할 시 기어의 수명은 영구적이었고 소재의 경도가 우수할수록 더 많은 허용굽힘응력과 허용접촉응력을 받을 수 있다는 것을 시뮬레이션을 통하여 입증된다. 그리고 기어의 검증결과로 기어를 다시 설계할 경우 고주파나 질화강으로 하여 기어의 잇수가 1-3개만 늘어나고, 피치원의 지름이 4-12mm늘어나면 영구적으로 사용할 수 있고 침탄강을 사용할 시 치폭이 3mm줄어들고, 기어 잇수가 1-3개 줄어들고 피치원의 지름이 4-13mm 줄어들어 감속기를 경량화 시킬 수 있다는 것을 시뮬레이션을 통하여 입증되었다.

• Journal of the Korean Institute of Gas
• /
• v.12 no.3
• /
• pp.64-67
• /
• 2008

The valve applied air pressure type of high pressure packing is developed to prolong the lifetime and to enhance the airtight. The effective valve developed enables to get remove the remaining pressure through the part of valve in handle so that a separate valve to drain is no need. The character of valve developed in this experiment is high packing of valve through special form and having drain hole in stem that enables a drainage regardless the status of vale is closed or opened.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1305-1311
• /
• 2015

A butterfly valve is a type of flow-control device typically used to regulate a fluid flow. This paper presents an estimation of the shape parameter of the Weibull distribution, characteristic life, and $B_{10}$ life for a concentric butterfly valve based on a statistical analysis of the reliability test data taken before and after the valve improvement. The difference in the shape and scale parameters between the existing and improved valves is reviewed using a statistical hypothesis test. The test results indicate that the shape parameter of the improved valve is similar to that of the existing valve, and that the scale parameter of the improved valve is found to have increased. These analysis results are particularly useful for a reliability qualification test and the determination of the service life cycles.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.279-282
• /
• 2011

The analysis and experimental results for the bellows of gasgenerator liquid oxygen shut-off valve are presented. The analyses are performed using EJMA (Expansion Joint Manufacturing Association) standard and the commercial FE (finite element) analysis program, Abaqus v6.9, at room and cryogenic temperatures. The results include the spring rate, the stress and the fatigue life of the bellows. The effects of the contact and material plasticity on the FE analysis results are also analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.13-18
• /
• 2004

전력계통 분야에서는 HVDC 전력변환소, BTB, UPFC 및 SVC의 안정성 향상 및 안정적인 운용을 위한 체계적인 유지보수 및 관리가 필요하다. 특히 전력계통에 접속된 대용량 전력반도체 소자인 사이리스터 밸브는 운전중에 열적, 전기적인 스트레스를 받게 되며, 이로 인해 밸브의 수명이 감소하여 전력계통의 안정적인 운용을 어렵게 만드는 요인이 된다. 따라서 전력계통 운용의 안정성을 확보하기 위해서는 대용량 사이리스터 밸브의 열적, 전기적 스트레스에 따른 수명 변화를 예측하는 열화진단 기법의 개발이 중요하다. 본 고에서는 대용량 사이리스터 소자의 열화진단 기법에 대한 국내외 현황과 현재 연구가 진행중인 열화 진단 기법에 대해 서술하였으며, 1500V급 사이리스터 소자의 가속열화 실험을 통해 소자의 수명을 예측한 결과를 나타내었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.85-91
• /
• 1998

This paper describes an study electric injection system for diesel engines. It is needed effective fuel injection which controls the solenoid valve of fuel pump. To solve this, this paper proposes DCC-PWM method which can realize fast reply and low holding current for solenoid valve on/off. For the proposed design method, simulation tools of ACSL are used to analyze the system. And the single-chip microcomputer is used to reduce the size of controller and to improve flexibility. And the systems validity can be verified through the experimental results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.28-35
• /
• 2017

A main oxidizer shutoff valve controls the supply of the oxidizer flow into the combustion chamber of a liquid rocket engine. This shutoff valve also carries out the pre-chilling of oxidizer supply lines by permitting recycling flow for stable transient start of the engine. In the present paper, the flow tests for the recycling line of the valve were conducted in order to evaluate the cooling performance of the main oxidizer shutoff valve. In addition, cryogenic life-cycle tests were performed with an assumption of the increase of spring constant with increasing valve operating times due to ductile-brittle transition effects.