• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.309-317
• /
• 2002

Line Balancing is the method enflowing workparts smoothly by balancing the worktime of processes, and reduces the cycle time. Soccer is the sports attacking the opposite team and defending a friendly area efficiently by means of ball. To accomplish this purpose, space balancing is the necessary condition. Soccer 'system' what we called 'formation' is the basic frame to balance the space of playground, operate the tactics. This paper introduces 'Dual Hexagon System', a quite new system in soccer, using line balancing principle. It also explains the correlations between line balancing and dual hexagon system, distinctions and position names of dual hexagon system, and then suggests success factors.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1661-1664
• /
• 2003

The transcoding is a method which converts a multimedia stream to an adaptive format, such as frame rate and resolution, that can be played in the mobile devices. Due to the heavy consumption of CPU power for transcoding, the server in charge cannot supply all streams requested from clients if it is already occupied by several streams. The load balancing among proxies is a common approach for solving such problem. In addition to collaborative works for load balancing, the mobility must be taken into account in the mobile environments. Thus, the wired-network based algorithm is not suitable for the streams service in the mobile environments. In this paper, we propose an alternative scheme for cooperative proxy architecture that considers the case in which mobile devices are moving over other zones.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.54-60
• /
• 2002

A mini turbo-pump having 44mm diameter impeller for hydraulic power control have been tested to evaluate hydraulic performance and losses. The characteristics of the losses such as mechanical, friction, balancing rib losses were investigated. The investigation revealed that the friction loss is relatively large but the balancing rib loss small. It was found that the hydraulic efficiency of the pump at design point is very low($27\%$) due to low specific speed and large friction losses. A computational fluid dynamics(CFD) method also has been utilized for performance prediction of the mini turbo-pump to compare the computed results with the test data.

• The KSFM Journal of Fluid Machinery
• /
• v.9 no.2 s.35
• /
• pp.39-43
• /
• 2006

The magnitude of the axial force acting on turbopump bearings has a great influence on the operational reliability and service life of a turbopump. In the turbopump under current investigation the cavity vanes are introduced to the pump shroud casing to control the axial thrust of the turbopump. To investigate the effect of the cavity vanes, 3D computational flow analyses for a propellant pump stage including an inducer, impeller, volute and secondary flow passages are performed with and without the vanes. The results show that the cavity vanes are very effective in reducing the magnitude of axial thrust without notable changes on the overall performance of the turbopump.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.425-428
• /
• 2004

Flexible assembly line (FAL) is a production system that assembles various parts in unidirectional flow line with many constraints and manufacturing flexibilities. In this research we deal with a FAL balancing problem with the objective of minimizing the maximum workload allocated to the stations. However, almost all the existing researches do not appropriately consider various constraints due to the problem complexity. Therefore, this thesis addresses a balancing problem of FAL with many constraints and manufacturing flexibilities, unlike the previous researches. To solve this problem we use a genetic algorithm (GA). To apply GA to FAL, we suggest a genetic representation suitable for FAL balancing and devise evaluation method for individual's fitness and genetic operators specific to the problem, including efficient repair method for preserving solution feasibility. The experimental results are reported.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.613-615
• /
• 2002

본 논문에서는 멀티미디어 데이터의 증가로 인한 네트워크 전송량 폭주 현상 및 서비스 비용의 증가를 감소시키기 위한 방법으로, 부하분산과 관련된 가상서버의 개념에 대해서 알아보고, 대표적인 가상 서버중 하나인 리눅스 가상 서버 (LVS : Linux Virtual Server)의 성능 측정을 통해 멀티미디어 컨텐츠 전송에 사용되는 CDD 시스템에 가장 적합한 가상서버의 구성 및 알고리즘을 도출하였다. 이를 위해서 리눅스 가상서버 시스템을 구축하고, 3가지 구성방식과 8가지 스케줄링 알고리즘에 대한 성능 평가를 수행하였으며, 각 경우에 대한 비교분석을 하였다. 이를 토대로, 추후 CDD 시스템과의 접목을 통하여 네트워크 부하량을 감소시키고, 서버로부터 발생할 수 있는 병목현상을 적은 비용으로 해결할 수 있는 방향을 제시하고자 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1083-1088
• /
• 2001

In this paper, we propose a new CBT(core-based tree)multicast routing Mechanism by load balancing mechanism. CBT may result in traffic concentration and bottlenecks near the core routers since traffic from all sources nodes the same set of links as approaches the core. So the router have to load packet to new core router for such congestion. Congestion information is given by rtt(round trip time) between designed core router and the other router.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10c
• /
• pp.331-334
• /
• 2006

워크플로우 비즈니스 프로세스는 설러 단위 업무(Activity)로 구성되며 단위 업무에는 여러 가지 타입이 존재한다. 유저 태스크(User Task) 타입은 특정 애플리케이션을 통해 처리되는 중요한 단위 업무 타입중 하나이며 본 논문에서는 유저 태스크 타입에 대한 최적의 수행자를 할당할 수 있는 질의어 기반 수행자 할당 방식을 기술한다. 이 방식은 기존의 워크플로우 관리시스템의 워크플로우 엔진에서 제공하는 로드-밸런싱 알고리즘을 현행 그대로 유지하는 동시에 조직의 조직 구조 정보를 이용하여 유저 태스크에 대한 기존의 할당 방식에서 확장된 형태의 수행자 할당 방법을 제공함으로써 태스크 처리에 대한 최적의 수행자를 할당하여 단위 업무의 처리 효율성을 향상시킨다.

• IE interfaces
• /
• v.16 no.4
• /
• pp.463-472
• /
• 2003

In this study we consider the problem of MPS(master production planning) of TFT-LCD(Thin Film Transistor - Liquid Crystal Display) production factory. Due to the complexities of the TFT-LCD production processes, it is difficult to build effective MPS. This study presents an algorithm having a concept of IDPQ(Ideal Daily Production Quantity) that considers line balancing of TFT-LCD production process. In general, the MPS building procedure does not consider line balancing in non-bottleneck processes. MPS without considering line balancing may make ineffective schedule. We present algorithms for building MPS considering factory capacity and line balancing according to the sales order.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1474-1480
• /
• 2017

This paper presents a new LED current balancing scheme using double-step-down dc-dc converter. With the proposed structure, the two channel LED currents are automatically balanced without using any dedicated control or auxiliary circuit. In addition, switching loss of the switching devices in the proposed LED driver is lower than that of the conventional buck LED driver. To verify the operation of the proposed LED driver, a hardware prototype is built and tested with different number of LED.