• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.38-38
• /
• 2000

최근 개발되고 있는 고속회전기계들은 무게 절감과 성능을 높이기 위해 그 크기가 소형화되고, 높은 회전수를 갖는 경향이 있으며, 이로 인하여 기계의 운전속도가 회전체의 1차 굽힘 위험속도(Critical Speed) 이상에서 운전하는 경우가 빈번히 발생되고 있다. 위험속도를 통과하는 고속회전기계 개발에 있어 가장 중요하게 고려되고 있는 회전체진동 문제는 정밀 제작 및 조립, 좋은 성능의 댐퍼 설계, 그리고 고속회전체 밸런싱 (High Speed Balancing) 작업등을 통하여 더 이상 회전기계 개발의 장애요인이 아닌 것으로 점차 인식되어 가고 있다.(중략)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1658-1661
• /
• 2010

유비쿼터스 시대가 도래하면서 인프라 중 하나인 센서네트워크에 대한 연구가 활발하게 진행되고 있다. 배터리를 사용하는 센서들의 특성상 네트워크 수명을 최대화하는 것이 주요 이슈 중 하나인데, 모바일 싱크를 이용하여 패킷 전송에 소비되는 에너지 로드 밸런싱을 통해 효율적인 결과를 얻을 수 있었다. 전체 센서들의 잔여 에너지와 그 평균과의 편차를 싱크를 움직이는 기준으로 하는 휴리스틱 알고리즘을 제안하였고 최적에 가까운 결과를 얻었다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.316-317
• /
• 2020

In this paper, a novel six-level inverter is proposed. Voltage regulation is applied at DC-link and flying capacitors through the implementation of phase-shifted carrier-based modulation with zero-sequence voltage injection. The performance of the proposed structure has been verified under various modulation indices, where low voltage ripple is achieved at each capacitor and total harmonic distortions (THD) of line voltage at unity modulation index is about 15.95%.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.979-986
• /
• 2014

This study establishes basic data for operations management by organizing processes and measuring time in the mini line for female jackets to improve productivity, ensure competitiveness, and maintain operator competency and the line process flow balance between apparel manufacturing companies. The results of this study are as follows. Sewing operations are divided into preparation functions, arrangement, partial tasks, and assembly that consist of 84 processes. The results from time measurement indicate that 3238.41seconds (sec) were required to produce a single jacket and that the average time required for operators was 231.32 sec. A control limit was established to increase the reliability of the measured value for net time. After outside values were removed, the operation time was measured to be 3176.35 sec. This accounted for 98.08% of the total operation time, with net time decreasing by 62.06. Skill and effort level coefficients were applied to measure the operator performance, the total real time was calculated to be 3415. The requirement for preparation and arrangement operations were 1233.35 sec, and 2182.22 sec for partial tasks and assembly operations. Process separation and organization were performed after the bottleneck operation was selected to identify the maximum line balance. Consequently, process efficiency of preparation and arrangement operations increased from 79.19% to 93.00%, and the partial tasks and assembly operations increased from 62.36% to 90.93%.

• KIISE Transactions on Computing Practices
• /
• v.23 no.12
• /
• pp.677-683
• /
• 2017

Apache Storm is a representative real-time distributed processing system, which is able to process data streams quickly over distributed servers. Storm currently provides several stream grouping methods to distribute data traffic to multiple servers. Among them, the shuffle grouping may cause a processing delay problem and the local-or-shuffle grouping used to solve the problem may cause the problem of concentrating the traffic on a specific node. In this paper, we propose the locality-aware grouping to solve the problems that may arise in the existing Storm grouping methods. Experimental results show that the proposed locality-aware grouping is considerably superior to the existing shuffle grouping and the local-or-shuffle grouping. These results show that the new grouping is an excellent approach considering both the locality and load balancing which are limitations of the existing Storm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.4
• /
• pp.247-255
• /
• 2018

This paper proposes a transformer design of a direct cell-to-cell active cell balancing circuit with a multi-winding transformer for battery management system (BMS) applications. The coupling coefficient of the multi-winding transformer and the output capacitance of MOSFETs significantly affect the balancing current transfer efficiency of the cell balancing operation. During the operation, the multi-winding transformer stores the energy charged in a specific source cell and subsequently transfers this energy to the target cell. However, the leakage inductance of the multi-winding transformer and the output capacitance of the MOSFET induce an abnormal energy transfer to the non-target cells, thereby degrading the transfer efficiency of the balancing current in each cell balancing operation. The impacts of the balancing current transfer efficiency deterioration are analyzed and a transformer design methodology that considers the coupling coefficient is proposed to enhance the transfer efficiency of the balancing current. The efficiency improvements resulting from the selection of an appropriate coupling coefficient are verified by conducting a simulation and experiment with a 1 W prototype cell balancing circuit.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.33-37
• /
• 2011

In the fields of display, optics, and energy, it is important to improve micropattern-machining technology for achieving small patterns, large surface areas, and low cost. Unlike flat molds, roll molds have the following advantages: they can be manufactured within a short time, larger surface areas can be obtained, and continuous molding can be achieved. In this study, we aim to investigate the causes for errors in the shapes for a micropattern-machining process, and we show that by compensating the dynamic balance of roll molds, the dimensional accuracy of machined parts can be improved. The experimental results show that dynamic-balance compensation for a roll mold reduced the mass unbalance and the vibrations of the roll mold, and as a result, the dimensional accuracy of machined micropatterns has been improved.

• Journal of Korea Multimedia Society
• /
• v.6 no.3
• /
• pp.384-396
• /
• 2003

Hybrid query processing method is used for preventing server overload that is created by heavy user connection in Web GIS. In Hybrid query processing method, both server and client participate in spatial query processing. But, Hybrid query processing method is restricted in scalability of server and it can't be fundamentally solution for server overload. So, it is necessary for Web GIS to be brought in web clustering technique. In this thesis, we propose load-balancing method that uses proximity of query region. In this paper, we create tile groups that have relation each tile in same group is very close, and forward client request to the server that can have maximum rate of buffer reuse with considering characteristic of spatial query. With out load balancing method, buffet in server is optimized for exploring spatial index tree and increase rate of buffer reuse, so it can be reduced amount of disk access and increase system performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.9
• /
• pp.816-825
• /
• 2007

With a view to building up a program used in conceptual design of liquid rocket engine system, a preliminary performance-based code for an integrated engine system has been developed by incorporating sub-modular programs for each essential engine component. Modular descriptions for each component were formulated mathematically with essential parameters. In the whole iterative circuits for predicting engine performance, matching conditions of mass flow rate and pressure drop through each engine component have been considered. Mass balance calculations at each inter-component boundary are found smoothly converged. All the pressure drops through engine components as a function of mass flow rate are added up to provide turbo-pump outlet condition. In this paper, the flow chart for each iterative circuit and design methodologies are presented. Resultant predictions are validated with real engine data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.9-14
• /
• 2003

In this work, a multi-block/multi-partitioning method is suggested for a multi-block parallelization. It has an advantage of uniform load balance via subdividing of each block on each processor. To make a comparison of parallel efficiency according to domain decomposition method, a multi-block/single-partitioning and a multi-block/ multi-partitioning methods are applied to the flow analysis solver. The multi-block/ multi-partitioning method has more satisfactory parallel efficiency because of optimized load balancing. Finally, it has applied to the CFDS code. As a result, the computing speed with sixteen processors is over twelve times faster than that of sequential solver.