• Journal of the Korean Chemical Society
• /
• 제47권4호
• /
• pp.370-375
• /
• 2003

$BaMg_2Al_16O_27:Eu,\SrGa_2S_4:Eu$, and ZnCdS:Ag,Cl phosphors were chosen to produce blue, green, and red emissions, respectively, under excitation from a violet light emitting diode (LED). A four-band white LED was obtained by a combination of nonabsorbed violet emission from a violet LED and blue, green, and red emissions from $BaMg_2Al_16O_27:Eu,\SrGa_2S_4:Eu$, and ZnCdS:Ag,Cl phosphors. The luminescent properties of the four-band white LED were also discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권2호
• /
• pp.309-314
• /
• 2012

In this paper, we present surface-to-underwater visible light communication systems using white LEDs. Pulse position modulation (PPM)-based analogue data communications and on-off keying-based digital data communications systems are developed. Inexpensive and commercial power-LEDs and photo-diodes are used to construct two types of systems. We report the experimental results obtained from the prototype systems to show the possibility of an optical underwater visible light transceiver as a basis for short range underwater wireless network. Their performance deteriorates more than the atmosphere's one because of attenuation and scattering of the light in water, but these results are promising for the potential to create more robust network interface that improve medium performance such as a LED modulation and a photo-detector demodulation.

• Korean Journal of Optics and Photonics
• /
• 제24권2호
• /
• pp.64-70
• /
• 2013

In this paper, two white light emitting diodes(LEDs) were manufactured by using two kinds of yellow phosphor, YAG:Ce and $(Sr,Ba)_2SiO_4:Eu$, and their spectroscopic properties were compared and analyzed. We found that the asymmetric double sigmoidal function can be applied to both white LEDs to obtain the center wavelength, the half width, and the skewness parameters. According to this analysis, the half width of the emitting spectrum of silicate phosphor was smaller than that of YAG phosphor, indicating smaller color rendering index. However, the silicate phosphor exhibited better color stability depending on the driving current than the YAG phosphor. The current dependence of the luminous efficacy of both white LEDs was investigated, which showed that efficacy decreased monotonically with current. The efficacy of the silicate-based white LED was lower than that of the YAG-based LED by about 10~12 lm/W.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권11호
• /
• pp.368-375
• /
• 2016

This study examined the criteria for efficient LEDs used throughout the experiment of an LED with another light color growth to be used in a plant factory. The experiment was confirmed by measuring the Red-LED, Blue-LED, plant growth, and amount of carbon reduction in a White-LED environment. The white-LED showed a similar growth trend to the Red-LED. Blue-LED showed the lowest growth. Measurements of the carbon dioxide levels, showed that the Red-LED and blue LED produced the lowest levels. The combination of the ratio of the LED showed four Red-LEDs and one blue LED to be the higher of the two. In addition, three Red-LED and one Blue-LED produced equal growth to that of the white-LED. In addition, as much as possible, red is the light color that obtains the result suitable for plant factories.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.240-240
• /
• 2009

오늘날 반도체 기술의 획기적인 발전에 의해서 마침내 에디슨의 탄소 필라멘트 백열전구를 대체할 수 있는 "반도체 필라멘트"라 불리는 고출력 백색 LED (lighting emitting diode)가 차세대 조명광원으로 급부상하고 있다. 백색LED를 생산하기 위한 공정에서 MOCVD (유기금속화학증착)장비를 이용한 공정은 기판의 온도 균일도를 향상시키는 것이 매우 중요하다. 균일한 기판 온도를 갖기 위한 조건으로 기판과 induction heater의 간격, 가스의 흐름, 기판의 회전, 유도가열코일의 디자인 둥이 장비의 설계 요소이다. 본 연구에서는 기관과 induction heater의 간격에 따른 온도를 thermal imaging camera (Fluke, Ti-10)을 이용하여 측정하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권4호
• /
• pp.473-477
• /
• 2015

In this paper, a commercial phosphorescent white light-emitting diode (WLED) visible light communication (VLC) system with an equalization circuit to achieve the high modulation bandwidth was designed and demonstrated. An analytical method to examine the performance of the equalizer was carried out using a general circuit-simulator, PSpice. The equalization circuit was composed of two passive filters with resisters and a capacitor and an active filter with an op-amp. Utilizing our post-equalization technology, the ~3.5 MHz bandwidth of phosphor WLED could be extended to ~25 MHz without using an optical blue-filter. In this VLC system with a single round-type WLED and a single PIN photo-diode, ASK data transmission up to 35 Mbps at a 1m free space distance was obtained. The resulting bit-error-rate was $7.6{\times}10^{-4}$, which is less than the forward error correction (FEC) limit of $3.8{\times}10^{-3}$.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.129-132
• /
• 2001

LED는 오랫동안 가전제품이나 각종 기계의 표시소자로 사용되어 왔으나, 최근 LED가 고취도화 되면서 LED를 이용한 조명제품 개발이 활발하게 이루어지고 있다. 본 논문에서는 RGB LED를 이용한 LED 전구를 설계하기 위해 광학설계 프로그램 LightTools을 이용하였다. RGB LED의 비율과 배치에 따른 태양광과 비슷한 백색광을 얻기 위해 RGB LED의 비율을 R:G:B=1:1.5:3, 하여 CIE 색좌표 x:y=0.342: 0.291, 색온도 5100[K]의 값을 얻었다. RGB LED의 대칭, 원형, 간격별 배열에 따른 배치를 통하여 색좌표 x:y= 0.337: 0.297인 백색광을 얻었다. 이 같은 결론을 바탕으로 RGB LED전구를 설계하였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.84-88
• /
• 2005

본 연구에서는 백색광원용 조명램프에 필요한 고밀도로 집적된 LED 어레이를 제작하기 위하여 반도체제조 공정에 필요한 포토마스크를 AutoCAD 상에서 설계하였으며 레이저 리소그래피 장비를 이용하여 포토마스크를 제작하였다. 웨이퍼상에 LED칩을 개별적으로 제작한 후 이들을 직렬 및 병렬로 금속배선하여 연결하였다. 특히 AutoCAD로 각 공정의 포토마스크 패턴을 설계 작업한 후 DWG 파일을 DXF 파일로 변환하여 레이저빔으로 스캔닝하였다. 이를 소다라임 유리판 위에 크롬을 증착한 후 각 패턴에 맞추어 식각 함으로써 포토마스크를 제작하였다. 또한 2인치 InGaN/GaN 다중 양자우물구조의 광소자용 에피박막이 증착된 사파이어 웨이퍼에 포토마스크를 활용하여 반도체 제조공정을 수행하였으며, 금속배선된 백색LED램프를 제작하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제16권10호
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제13권1호
• /
• pp.329-332
• /
• 2012

LEDs are using widely in a field of illumination, LCD LED backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. To achieve high performance LEDs, one needs to enhance output power, reduce operation voltage, and improve device reliability. In this paper, we have proposed that the optimum design and specialized process could improve the performance of LED chip. It was showed an output power of 7cd and input supplied voltage of 3.2V by the insertion technique of current blocking layer. In this paper, GaN-based LED chip which is built on the sapphire epi-wafer by selective MOCVD were designed and developed. After that, their performances were measured. It showed the output power of 7cd more than conventional GaN-based chip. It will be used the lighting source of a medical equipment and LCD LED TV with GaN-based LED chip.