• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.188-198
• /
• 2007

Platinum nanoparticles loading on carbon nanotube was carried out by impregnation of hexachloro platinate(IV) from hydrogen hexachloro platinate(IV) hydrate dissolved solution without using reduction agents, and heating the hexachloro platinate(IV) impregnated carbon nanotube up to $400^{\circ}C$. The amounts of impregnated hexachloro platinate(IV) on to carbon nanotube were measured with UV-visible spectrophotometer. The TG, XRD, and TEM analysis were performed to confirm the platinum particles loading and distribution on carbon nanotube. The average platinum particles size on carbon nanotube was under 2 nm by heating the hexachloro platinate(IV) up to $400^{\circ}C$ in spite of non-using reduction agents, while the average size increased due to the agglomeration of some particles by heating them up to $800^{\circ}C$. Therefore, uniformly distributed platinum nanoparticles loading on carbon nanotube can be obtained from simple impregnation of hexachloro platinate(IV) from solution and heating it up to $400^{\circ}C$.

• Resources Recycling
• /
• v.26 no.3
• /
• pp.26-31
• /
• 2017

LIX 63 showed a selectivity for the extraction of Pd(II) over other PGMs, such as Pt(IV), Ir(IV) and Rh(III) from 6 M HCl solution. Moreover, HCl solution has significant effect on the oxidation-reduction reaction between Ir(IV) and LIX 63. Therefore, the applicability of employing LIX 63 for the separation of the 4 PGMs was investigated from 3 M HCl solution. From 3 M HCl solution, only Pd(II) was selectively extracted by LIX 63 and its extraction percentage was higher than from 6 M HCl solution. Extraction of the Pd(II) free raffinate with TBP led to the selective extraction of Pt(IV). After oxidation of Ir(III) with $NaClO_3$ to Ir(IV), extraction of the Pt(IV) free raffinate with Aliquat 336 selectively extracted Ir(IV). For each extraction step, optimum stripping conditions were obtained. By this process, it was possible to separate the 4 PGMs by solvent extraction from 3 M HCl solution.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.30-37
• /
• 2009

Distribution diagram of Pt(IV), Pd(II), and Rh(III) in HCl solution was obtained as a function of HCl concentration from 0.001 to 10 M by considering complex formation reaction together with mass balance. When HCl concentration was higher than 0.1 M, most of Pt and Pd in HCl solution exist as $PtCl_6^{2-}$ and $PtCl_4^{2-}$. The concentration of HCl had a feat effect on the speciation of Rh(III). As HCl concentration increases from 0.1 to 10 M, the pedominant species changes from $PhCl_5^{2-}$ to $PhCl_6^{3-}$. Interaction parameters of $PtCl_6^{2-}$ and $PdCl_4^{2-}$ with hydrogen ion were evaluated from the solvent extraction data of Pt and Pd reported in the literature.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.29-34
• /
• 2013

Solvent extraction experiments were performed to separate platinum and rhodium from mixed chloride solution by using tri 2-ethylhexyl amine (TEHA) and its mixture with TBP and LIX 63. Effects of extraction conditions on the separation of the two metals were investigated as a function of extractant concentration in the HCl concentration range from 1 to 9 M. The concentration of Pt (IV) and Rh(III) was controlled to $1{\times}10^{-3}M$ and $2{\times}10^{-4}M$, respectively. In the extraction with TEHA and its mixture, Pt was quantitatively extracted irrespective of HCl concentration, while the extraction percentage of Rh depended on the extraction condition. When the concentration of HCl in the mixed solution was low, the extraction of Rh was nil and separation of Pt and Rh was possible. Adding TBP to TEHA had little effect on the extraction of both metals, while adding LIX63 to TEHA favored the extraction of Rh.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.35-39
• /
• 1995

Simultaneous measurements of trace platinum and rhodium, based on catalytic reduction of protons by the adsorbed Pt-formazone and Rh-formaldehyde complexes formed in formaldehyde-hydrazine-sulfuric acid medium, were demonstrated. The conditions for the measurements of Pt and Rh both present at trace levels (>10-10 M) were 0.004% (w/v) formaldehyde-0.0012% (w/v) hydrazine-0.75 M sulfuric acid. In this medium method detection limits are 7.3${\times}$10-11 M Pt and 3.2${\times}$10-11 M Rh. And dynamic ranges are 5${\times}$10-10~6${\times}$10-8 M and 1${\times}$10-10∼2${\times}$10-8 M for platinum and rhodium respectively. In the linear dynamic ranges, Rh and Ir interfere platinum in the presence of only 10 and 100 times that of Pt respectively. There are no interferences from other platinum group metal ions for rhodium even in the presence of a 500-fold excess of Ir(IV), a hundredfold excess of platinum.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1386-1392
• /
• 2018

Cispatin has become one of the most widely used anticancer drugs for decades. One of the drawback of cisplatin (II) complex is that it not only targets cancerous cells but also normal cells causing several serious side effects in patients. We have synthesized Pt(IV) complex that are needed to have the ability to kill target cells selectively in a short time before drug resistance develops. By introducing PDK inhibitor, butyric acid and valproic acid, on Pt complex, two fusion anti-cancer agents 3 and 4 have been synthesized and characterized their structures by nmr and mass spectrometer. MTT assay was performed with $Pt(IV)-Bu_2$ 3 and $Pt(IV)-Val_2$ 4 against MCF-7 cell line. As a result, cisplatin, Pt(IV) complexes 3 and 4 were treated, cell viabilities at $50{\mu}M$ cencentration were decreased to 39%, 54% and 84% respectively.

• Journal of Surface Science and Engineering
• /
• v.33 no.4
• /
• pp.261-265
• /
• 2000

Geometrically and chemically well defined Pt/alumina model catalysts have been prepared. To this end, we fabricated electrochemically alumina supports in which pores of constant size, length and shape were regularly distributed over a wide area of the surface. Platinum particles were dispersed on the pore surfaces via organometallic chemical vapor deposition technique using (trimethyl) methylcyclopentadienylplatinum (IV) as a precursor. The chemical composition of the alumina plane surfaces was examined by Auger electron spectroscopy and the adsorption characteristics of the platinum particles were studied by thermal desorption spectroscopy. A variety of industrial catalytic problems are now open for further investigation utilizing the Pt/alumina model catalysts.

• Korean Journal of Metals and Materials
• /
• v.48 no.2
• /
• pp.148-153
• /
• 2010

The effects of Cu(II) and Al(III) on the extraction and separation of Pt(IV) and Pd(II) have been investigated in a mixed chloride solution using Alamine336 as the extractant. In the HCl concentration range of 1 to 5 M, more than 99% of Pt and Pd could be extracted by Alamine336 from all of the mixed chloride solutions investigated in this study. Lower HCl concentration led to a higher separation factor between Pd and Pt when Alamine336 concentration was constant. Extraction percentage of Cu increased with the increase of HCl concentration, while that of Al was nearly constant at 33% in our experimental range. The optimum conditions to extract Pt and Pd from Cu or Al and the separation factor under these conditions were obtained.

• The Korean Journal of Pain
• /
• v.10 no.2
• /
• pp.196-202
• /
• 1997

Background: Various pain treatments have been administered to relieve patients suffering from postoperative pain. Among these, epidural or intravenous opiate administration is by far the most widly applied treatment in recent times. However it was our objective to device a more effective and safe means of postoperative analgesia. Methods: We studied 110 healthy pregnant women scheduled for delivery by elective cesarean section. EPI(epidural)-group is administered morphine 1.5 mg and 0.25% bupivacaine 8 ml as bolus dose, then, a mixture of morphine 6 mg and 0.125% bupivacaine 95 ml as continuous dose via epidural route. IV(intravenous)-group is administered nalbuphine 6~7 mg as bolus dose and nalbuphine 60~70 mg with 0.9% normal saline 90 ml as continuous dose via intravenous route, at the rate of 2 ml/hr for 2 days. We compared the analgesic efficacy and side effects of these two groups using VAS pain score and time duration of constant pain level. Results: VAS pain score was similar between the two groups, but pain duration was significantly shorter in EPI-group. Incidence of pruritus was significantly lower with the IV-group, of nausea and vomiting were similar for both groups, no respiratory depression for either groups. Conclusions: Although the EPI-group had better analgesic efficacy, the IV-group had lower incidence of side effects, and simplicity and safety methods of operation. Therefore, We propose further research and consideration of administering the kinds and doses of those medications prescribe to the IV group in conjunction with other drugs for safer and better efficacy of postoperative analgesia.

• YAKHAK HOEJI
• /
• v.38 no.6
• /
• pp.627-636
• /
• 1994

Several Pt(II) and Pt(IV) complexes of N,N'-bis(2-hydroxyethyl)ethylenediamine(2-HEen) and N,N'-bis(2-chloroethyl) ethylenediamine(2-CEen) as carrier ligand were prepared. Water soluble Pt complexes were also synthesized by modification of leaving groups. The cytotoxicity of these compounds against leukemia L1210 and P388 cell in vitro were examined. The Pt complexes containing 2-CEen showed more effective cytotoxicity than those containing 2-HEen. Through the nephrotoxicity tests on the primary cultured proximal tubular cells of rabbit kidney and human kidney cells in vitro, Pt complexes with 2-CEen showed higher than those with 2-HEen which were consistent with cytotoxicity but showed very low nephrotoxicity compared with cisplatin. Also the values of BUN and creatinine in serum of Pt complexes were reduced remarkably compared with cisplatin, therefore it can be concluded that new Pt complexes seems to have much lower nephrotoxicity than cisplatin.