• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.145-148
• /
• 2012

The effects of the linearly polarized UV (LPUV) irradiation and thermal treatment of a photo-degradable polyimide (CBDA-ODA) alignment layer (AL) on its AL properties, liquid crystal (LC) alignment, and LCD characteristics have been investigated. The best quality of LC photo-alignment have been induced by the LPUV-irradiation with much (about 5~10 times) less dosage than that generating the maximum anisotropy of the AL. A thermal treatment of the LPUV-irradiated AL has effectively removed the undesirable, low-M.W. fragments of the AL generated during the photo-decomposition and increased the stability of the AL, which has resulted in improvement of the LC alignment and the LCD property.

• Korean Journal of Optics and Photonics
• /
• v.26 no.4
• /
• pp.195-202
• /
• 2015

We developed a reflection ellipsometer so that one can measure the extremely small optical anisotropy of a rubbed polyimide alignment layer, without being disturbed by the residual anisotropy of the substrate. The optical anisotropy of the alignment layer was measured as rubbing strength was increased, and the measured anisotropy was compared to the retardation obtained by using a transmission-type ellipsometer, to confirm the reliability of our reflection ellipsometer. With this measured anisotropy we could verify the formation of an alignment layer by rubbing, and could quantitatively evaluate the formation of the alignment layer.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.271-278
• /
• 2013

The effective reflection coefficients of an obliquely incident wave on a multi-layered substrate coated with a uniaxially anisotropic alignment layer are derived. The effective reflection coefficients as well as explicit ellipsometric expressions are provided as a function of film constants of multiple layers together with magnitude of anisotropy, direction of optic axis, and thickness of the alignment layer. It is expected that by adapting these expressions to the conventional modelling technique, the ordinary refractive index, the extra-ordinary refractive index, the azimuth angle and the tilt angle of the optic axis, and the thickness of the aligned surface can be determined simultaneously together with the thickness and volume fraction of each layer beneath the alignment layer.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.75-79
• /
• 2015

In this study, we investigated the electro-optical (EO) characteristic of fringe-field switching (FFS) mode cell by the ion beam alignment method on the a-C:H thin film. The suitable inorganic thin films for FFS cell and the aligning capabilities of nematic liquid crystal (NLC) using the new alignment material of a-C:H thin film were studied. An excellent voltage-transmittance (V-T) and response time curve of the ion beam aligned FFS-LCD was observed with oblique ion beam exposure on the a-C:H thin films. Also, the V-T hysteresis characteristics of the ion beam-aligned FFS-LCD with IB exposure on the a-C:H thin films is almost the same as that of the rubbing-aligned FFS cell on a polyimide surface.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.67-70
• /
• 2015

We studied the state of the dual liquid crystal (LC) alignment which displays both homeotropic and homogeneous alignment on blended polyimide (PI) layer. The research was conducted using rubbing method at different imidizing temperatures and the blended PI was made using homeotropic PI having an alkyl side chain and homogeneous PI without the side chain. The uniform LC alignments were achieved, and have thermal stability. The results of contact angles were similar to that of pretilt angles.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.90-94
• /
• 2015

We stuidied liauid crystal alignment treatment using solution process for making thin oxide layer in liquid crystal display. It is the one of very effient and popular process in making thin oxide layer in electronical industrial fields. Particularly, this process has highly potential value in liquid crystal display industrial fields because it cause automatically induced alignment process without tranditional alignment process in liquid crystal alignment process. We made several different kinds of mol density solutions using strontium oxide solution. And those solutions were treated for solidification layers using annealing process for 2 hours. And we stuided pretilt angle properties of these alignment layers of strontium oxide for clarifying the relationship of liquid crystal molecules and thin strontium oxide layer. And we also tested the existence of strontium oxide thin layer on substrate using XPS measurement. We expected the hig gain of electro-optical properties in liquid crystal display using strontium oxide thin layer because it has high K property material than the other metal-based oxide layers. In this results, we measured 1.447 to 1.613 thresholds volts as 0.1 mol to 0.4 mol density in 0.1 mol density steps. This is significant better characteristics than conventional liquid crystal display as higher than 1.85 thresholds volts. And it make possible to making next-generation liquid crystal display which present low-power consumption and wide gray scale in liquid crystal display.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.385-389
• /
• 2011

In rubbing process, process factors, the properties of alignment layer and the physical properties of rubbing cloth have acted as important variables. These factors affect the orientation properties of the alignment layer by rubbed extent that is determined by rubbing density and rubbing force. In this work, we studied the effects of rubbing cloths with different pile density and rigidity on rubbing density(length) and rubbing force. As the pile density and rigidity of rubbing cloths increased, the birefringence and the surface roughness of the rubbed alignment layers became bigger, but the characteristics of rubbing-effect had differed each other. The pile density of rubbing cloths which was related with the number of pile, affected the rubbing density(length). On the other hand, the pile rigidity of rubbing was closely related to rubbing force rather than the rubbing density(length).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.109-115
• /
• 2023

In this paper, we demonstrated the orientation characteristics of liquid crystals using UV-treated FSAM as alignment layer. Moreover we confirmed the FSAM properties before and after UV treatment on indium tin oxide (ITO) glass substrates using physicochemical analysis. The hydrophobic property of the FSAM surface is change to hydrophilic through UV treatment. After UV treatment the LC molecules also were uniformly and horizontally aligned on the FSAM surfaces and the pretilt angle was obviously changed 90° degrees to 0° degrees. EO characteristic of TN cell which was fabricated with UV-treated FSAM was faster response time compare to conventional PI layer. The FSAM before and after UV treatment has a superior application potential as the LC alignment layer for LCD, potentially replacing the conventional polyimide layer.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.53-53
• /
• 1996

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.22-26
• /
• 2014

This paper introduces homogeneous liquid crystal (LC) orientations on chemically modulated polystyrene (PS) surfaces using various ion beam (IB) exposure time. Transparent PS was replaced with conventional polyimde material. Especially, PS has higher transparent property than conventional polyimide thin film and it means PS is more suitable material for producing high brightness mobile LCD. As a non-contact process, IB bombardment process induced LC orientation in the direction parallel to the IB process. Through x-ray photoelectron spectroscopy, it was shown that the chemical compositional changes of the IB-irradiated PS surfaces were determined as a function of IB exposure time. Using this analysis, the optimal IB bombardment condition was determined at IB exposure time of up to 15 s. Moreover, thermal stability on IB-irradiated PS surfaces were carried out which showed that a relatively high IB exposure time induced a thermally stable LC alignment property. And it has a highly potential of mobile high transparent mobile LCD such as smart phone display and mobile information device.