• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1162-1165
• /
• 2011

본 연구는 그린하우스 내의 환경 정보를 원격 감시 및 제어함으로써, 재배의 편리성을 확보하는 한편, 수집된 정보에 대하여 데이터베이스를 구축하여 작물 재배의 최적 환경을 도출하는 데 그 목적이 있다. 이를 위해서, 2연동 그린하우스 제작하여, 그린하우스를 내에 여러 종류의 센서와 카메라를 장착하였으며, 이를 통해서 감지되는 정보를 원격에서 수집, 자료화 하였다. 사용자 편의를 위하여 웹페이지를 개설, 실시간으로 정보의 검색과 제어가 가능하게 하였으며, 모바일에서도 일부 기능 구사가 가능하도록 하였다. 정보의 수집과 전달, 사용자에 의한 그린하우스 환경제어와 관련한 모든 기능에 대한 안정성을 장시간 현장시험을 통해서 실험적으로 확인하였다. 이 시스템은 그린하우스를 설치하여 작물을 재배하는 농가에 편리를 제공하여 시간적, 공간적 제약에서 많은 융통을 부여할 것이다. 또한 공장, 사무실, 가정 등 유사한 환경 시설에 대해서 확대 적용하는 것이 가능할 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.447-447
• /
• 2012

최근 생물전자공학에서 의료 산업 환경 등 많은 분야에 응용 가능한 바이오센서의 연구가 활발해지고 있다. 그 중 의료 분야에서, 수소이온 ($H^+$)의 농도 감지는 인간의 질병을 예측하는데 중요한 지표가 되며 이러한 수소이온 ($H^+$) 농도의 변화를 실시간으로 감지하기 위해 반도체를 기반으로 한 다양한 pH 센서가 제안되었다. Ion sensitive field effect transistor (ISFET), electrolyte-insulator-semiconductor (EIS)는 대표적인 반도체 pH센서로, 작은 소자 크기, 견고한 구조, 빠른 응답속도와 CMOS 공정과의 호환성이 좋다는 장점이 있다. 특히, EIS는 제조공정이 간단하고 감지막의 감지 특성 평가가 용이하기 때문에 지속적으로 연구되고 있는 pH 센서이다. 센서의 감지 특성을 평가함에 있어 감지막의 감지감도와 안정성이 우수해야 하며 이를 위해 high-k 물질이 감지막으로 사용되고 있다. 추가적으로 high-k 물질은 기존의 $SiO_2$와 $Si_3N_4$를 대신하여 높은 유전상수로 인한 고성능, 고감도 센서제작을 가능케 한다. 본 연구에서는, high-k 물질인 $HfO_2$, $Ta_2O_5$, $ZrO_2$, $Al_2O_3$를 각각 $SiO_2$ 완충막에 적층한 이단 감지막을 제작하였고, 그 특성을 기존의 $SiO_2$, $Si_3N_4$ 감지막의 감지특성과 비교하였다. pH 감지 특성을 평가해 본 결과, 기존의 $SiO_2$, $Si_3N_4$ 감지막과 비교했을 때 high-k 물질의 감지막을 갖는 EIS pH 센서에서 감지감도와 안정성 모두 우수하게 나타났다. 특히, high-k 물질 중 $HfO_2$에서 감지감도가 다소 크게 평가되었으나, 화학적 용액에 대한 안정성은 떨어졌다. 반면에 $Al_2O_3$과 $Ta_2O_5$은 화학용액에 대한 안정성 측면에서 최적의 특성을 보임을 확인하였다. 결론적으로, high-k 물질에 대한 전반적인 평가를 통하여 높은 pH 감지감도뿐만 아니라 우수한 안정성의 EIS pH 센서를 제작 할 수 있었다.

• Korean Journal of Materials Research
• /
• v.14 no.9
• /
• pp.607-613
• /
• 2004

This study was to investigate the surface properties of electrochemically oxidized Ti-6Al-7Nb alloy by anodic spark discharge technique. Anodizing was performed at current density 30 $mA/cm^2$ up to 300 V in electrolyte solutions containing $DL-{\alpha}$-glycerophosphate disodium salt hydrate($DL-{\alpha}$-GP) and calcium acetate (CA). Hydrothermal treatment was done at $300^{\circ}C$ for 2 hrs to produce a thin outermost layer of hydroxyapatite (HA). The bioactivity was evaluated from HA formation on the surfaces in a Hanks' solution with pH 7.4 at $36.5^{\circ}C$ for 30 days. The size of micropores and the thickness of oxide film increased and complicated multilayer by increasing the spark forming voltage. Needle-like HA crystals were observed on anodic oxide film after the hydrothermal treatment at $300^{\circ}C$ for 2 hrs. When increasing $DL-{\alpha}$-GP in electrolyte composition, the precipitated HA crystals showed the shape of thick and shorter rod. However, when increasing CA, the more fine needle shape HA crystals were appeared. The bioactivity in Hanks' solution was accelerated when the oxide films composed with strong anatase peak with presence of rutile peak. The increase of amount of Ca and P was observed in groups having bioactivity in Hanks' solution. The Ca/P ratio of the precipitated HA layer was equivalent to that of HA crystal and it was closer to 1.67 as increasing the immersion time in Hanks' solution.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.1
• /
• pp.55-64
• /
• 1992

This study investigated the effect of porcelain primer on bonding of coomposite resin to porcelain surface. In order to test the bond strength between porcelain and composite resin, porcelain cylinders were embedded in acrylic resin, and polished with 240grit silicone caqrbide paper. The specimens were divided into twelve groups. All specimens were treated with three porcelain primers and bonded with five composite resins. All test groups were stored in $37^{\circ}C$ distilled water for 48hours. Shear bond strengths were measured with Instron(Model 4201) at a cross-head speed of 1mm/min. The obtained results were as follows : 1. Scotchprime/Silux II group and BISCO Porcelain Primer/Bisfill group showed significant higher bond strengths than Clearfil Porcelain Primer/photo Clearfil Bright group(p<0.05). And there was no significant differences in bond strengths between Scotchprime/Silux II group and BISCO Porcelain Primer/Bisfill group(p>0.05). 2. When composite resins were used with Scotchprime, the bond strengths were decresed Silux II$(16.68{\pm}3.35MPa)$, Bisfil$(16.23{\pm}4.54MPa)$, Poly-Fill$(14.74{\pm}4.08MPa)$, Photo Clearfil Bright$(13.75{\pm}2.89MPa)$ and Pekalux$(14.74{\pm}4.08MPa)$ in order, but there was no statistical significance(p>0.05). 3. When composite resins were used with BISCO Porcelain Primer, the bond strength were decreased Bisfil$(16.17{\pm}1.60MPa)$, Silux II$(12.13{\pm}2.37MPa)$, Poly-Fill$(10.78{\pm}1.99MPa)$, Photo Cleafil Bright $(9.91{\pm}4.59MPa)$ and Pekalux$(7.36{\pm}2.16MPa)$ in order, but there was no statistical significance(p>0.05). 4. Silux II, Photo Clearfil Bright and Poly-Fill used with Scotchprime showed significant higher bond strengths than BISCO Porcelain Primer(p>0.05).

• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.567-581
• /
• 2006

The Au-Ag lode deposits in South Korea are closely associated with the Mesozoic granitoids. Namely, the Jurassic deposits formed in mesozonal environments related to deep-seated granitoids, whereas the Cretaceous ones were developed in porphyry-related environments related to subvolcanic granitoids. The time-space relationships of the Au-Ag lode deposits in South Korea are closely related to the changing plate motions during the Mesozoic. Most of the Jurassic auriferous deposits (about $165{\sim}145$ Ma) show fluid characteristics typical of an orogenic-type gold deposits, and were probably generated in a compressional to transpressional regime caused by an orthogonal to oblique convergence of the Izanagi Plate into the East Asian continental margin. On the other hand, strike-slip faults and caldera-related fractures together with subvolcanic activity are associated with major strike-slip faults reactivated by a northward (oblique) to northwestward (orthogonal) convergence, and probably have played an important role in the formation of the Cretaceous Au-Ag lode deposits (about $110{\sim}45$ Ma) under a continental arc setting. The temporal and spatial distinctions between the two typical Mesozoic deposit styles in South Korea probably reflect a different thermal episodes (i.e., late orogenic and post-orogenic) and ore-forming fluids related to different depths of emplacement of magma due to regional changes in tectonic environment.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2018

The geology of Hidalgo state in Mexico is formed by a Precambrian metamorphic rock base which discordantly supports a strong Paleozoic sedimentary rock sequence. Triassic-Jurassic and Cretaceous sedimentary rocks overlie the above-mentioned rocks at a discordant angle. These Mesozoic rocks are in turn covered by a Cenozoic structure which is marine at its base. At the top, the structure changes to andesitic and basaltic composition volcanic rocks. And, a great variety of mineral deposits, both metallic and nonmetallic, is present in Hidalgo state. The host rocks of these deposits are also very varied in age from Mesozoic to Tertiary. Mineralization age corresponds to Tertiary in 90% of the area. Hidalgo state occupies as an important place in national silver and manganese production. Main mineral deposits correspond to argentiferous veins hosted in sedimentary rocks. Following in order of importance are lead and zinc, as well as some small iron deposits. There is evidence of tin and molybdenum mineralization, but these deposits have not been exploited because of their low grade and volume. And, Hidalgo state has different types of nonmetallic mineral deposits such as sedimentary, hydrothermal, metamorphic and volcanic origins.

• Economic and Environmental Geology
• /
• v.41 no.3
• /
• pp.275-286
• /
• 2008

The Sambo gold deposit located nearby the Cretaceous Hampyeong basin is composed of gold quartz fine vein(the Jija vein) within Cretaceous rhyolite showing $N10{\sim}20W$ trends as well as $N5{\sim}10E$ trending quartz veins(the Pungja, Gwangsan and Pungjaji veins) in Precambrian gneiss. The gold vein typically displays the intermittent and irregular fine veins within rhyolite. Electrum is disseminated in wallrock along the fine cracks as well as coexists with hematite replacing pyrite. Ore-forming fluids from the mineralized vein($H_2O/-NaCl$ system, Th; $340{\sim}200^{\circ}C$, Salinity <2.7 eq. wt.% NaCl) and NE-trending veins($H_2O-NaCl/-CO_2$ system, Th; $400{\sim}190^{\circ}C$, salinity <7.9 eq. wt.% NaCl) are featured by dissimilar physicochemical conditions but their fluid evolution trends(boiling and mixing) are similar with each other. Gold veins of the Sambo deposit filled along NNW-trending tension crack are related to pull-apart basin evolution. Selective gold mineralization of the deposit reflect to dissimilarity between two ore-forming fluid sources. Consequently, gold veining of the Sambo deposit formed at shallow-crustal level and could be categorized into epithermal-type gold deposit related to tensional fractures filling triggered by Cretaceous geodynamics.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.36-44
• /
• 2013

We conducted the airborne magnetic and radiometric survey for the characterization of the black shale related and pyrometamorphic uranium deposits distributed in Geumsan area. For the successful characterization of the uranium deposits, the general geological and structural geological features were investigated based on the lithological and linear feature analysis to individual magnetic and radiometric data as the first step. Lithological analysis from the magnetic reduction to the pole and downward continuation map revealed that prominent positive anomalies caused by black and dark gray slate member were clearly recognized as magnetic sources. These results indicate that magnetic survey, even though it is not a direct method for the detection of uranium, can be a useful tool in uranium detection. By the linear feature analysis based on 2nd vertical derivative and curvature map, two linearments corresponded the gray hornfels and black slate member were extracted and in succession, the additional uranium potential zone was inferred. Final discrimination whether uranium-rich or not was confirmed by radiometric and uranium anomaly map. From these analysis, we finally concluded that uranium deposit originated by pyrometamorphic process was confined near the intrusive area only. On the contrary, it was found that black shale related uranium deposit is distributed and extended through out the entire survey area with south-west to north-east direction. In addition, from the linear feature analysis based on radiometric total anomaly map, the typical discontinuous characteristics were recognized in areas where uranium-contained linearments cross the faults. From the above discussion, we concluded that airborne magnetic and radiometric survey are complementary to each other. So it is preferable to carry out simultaneously for the efficient data processing and fruitful interpretation.

• Restorative Dentistry and Endodontics
• /
• v.24 no.3
• /
• pp.511-518
• /
• 1999

This study was performed to evaluate the mechanical properties of light-cured restorative composites by compression and indentation tests. Five commercially available light-activated composites (Heliomolar : HM, Aelitefil : AF, Amelogen : AG, Clearfil AP-X : CF, Z100 ZH) were used Disc specimens of 12mm in diameter and 1 mm in thickness and Cylindrical specimens of 3mm in diameter and 6mm in length were prepared for the indentation and compressive test, respectively. All specimens were immersed in distilled water at $37^{\circ}C$ for 30 days. An indentation test of 68-degree trigonal diamond pyramid was made under 10 g load for 15 seconds and an Knoop indentation test was made under 50 g load for 15 seconds. Hardness numbers, characteristic indentation depths and permanent deformation were measured during indentation of the 68-degree trigonal diamond pyramid compressive test was carried out at a crosshead speed of 0.5mm/min. The results obtained were summarized as follows, 1. The highest hardness value was obtained in the CF group and the lowest value was obtained in the HM group. Hardness values showed no significant, difference between AG group and HM group but other groups showed the significant differences in each group(p<0.05). 2. Hardness number by Knoop pyramid were higher than those of 68-degree trigonal diamond pyramid. 3. Plastic deformation during the indentation of 68-degree trigonal diamond pyramid was the lowest in the CF group and the largest in the HM group. Results of Tukey test showed the significant difference between CF group and others; also between ZH and AF groups and AG and HM groups(p<0.05) 4. The highest compressive strength was obtained in the CF group and the lowest compressive strength was obtained in the ZH group. Compressive strength values showed no significant difference between CF group and ZH group but other groups showed the significant differences in each group(p<0.05).

• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.327-336
• /
• 1996

This study was performed to investigate the effec% of immersion in water and thermal cycling on the mechanical peoperties of light cured restorative composite resins. Five commerically available light-cured composite resins(Photo Clearfil A : CA, Lite-Fil A . LF, Clearril Photo Posterior CP, Prisms AP.H.. PA, 2100 : ZH) were unto The specimens of 12 m in diameter and 0.7 m in thickness were made, and an immersion in $37^{\circ}C$ water for 7 days and a thermal cycling of 1000 cycles at 15 second dwell time each in $5^{\circ}C$ and $55^{\circ}C$ baths were performed. Biaxial flexure test was conducted using the ball-on-three-ball method at the crosshead speed of 0.5mm/min. In order to investigate the deterioration of composite resins during the thermal cycling test, Weibull analysis for the biaxial flexure strengths was done. Fracture surfaces and the surfaces before and after the thermal cycling test were examined by SEM. The highest Weibull modulus value of 10.09 after thermal cycling tests which means the lowest strength variation, was observed in the CP group, and the lowest value of 4.47 was obsered in the LF Group. Biaxial flexure strengths and Knoop hardness numbers significantly decreased due to the thermal cycling ($\textit{p}$< 0.01), however, they recovered when specimens were drie4 The highest biaxial flexure strength of 125.65MPa was observed in the ZH group after the thermal cycling test, and the lowest value of 64.86MPa was observed in the CA group. Biaxial flexure strengths of ZH and CP groups were higher than those of PA, CF, and CA groups after thermal cycling test($\textit{p}$< 0.05). Knoop hardness numbers of CP group after the thermal cycling test was the highest(95.47 $\pm$ 7.35kg/$mm^2$) among the samples, while that of CA group was the lowest(30.73 $\pm$ 2.58kg/$mm^2$). Knoop hardness numbers showed the significant differences between the CP group and others after the thermal cycling test(($\textit{p}$< 0.05). Fracture surfaces showed that the composite resin failure developed along the matrix resin and the filler/resin interface region, and the cracks propagated in the conical shape from the maximum tensile stress zone.