• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.23-30
• /
• 2007

The ultimate objective of this study is to develop oxygen-enriched combustion techniques applicable to the system of practical industrial boiler. To this end the combustion characteristics of lab-scale LNG combustor were investigated as a first step using the method of numerical simulation by analyzing the flame characteristics and pollutant emission behaviour as a function of oxygen enrichment level. Several useful conclusions could be drawn based on this study. First of all, the increase of oxygen enrichment level instead of air caused long and thin flame called laminar flame feature. This was in good agreement with experimental results appeared in open literature and explained by the effect of the decrease of turbulent mixing due to the decrease of absolute amount of oxidizer flow rate by the absence of the nitrogen species. Further, as expected, oxygen enrichment increased the flame temperatures to a significant level together with concentrations of $CO_2$ and $H_2O$ species because of the elimination of the heat sink and dilution effects by the presence of $N_2$ inert gas. However, the increased flame temperature with $O_2$ enriched air showed the high possibility of the generation of thermal $NO_x$ if nitrogen species were present. In order to remedy the problem caused by the oxygen-enriched combustion, the appropriate amount of recirculation $CO_2$ gas was desirable to enhance the turbulent mixing and thereby flame stability and further optimum determination of operational conditions were necessary. For example, the adjustment of burner with swirl angle of $30\sim45^{\circ}$ increased the combustion efficiency of LNG fuel and simultaneously dropped the $NO_x$ formation.

• Analytical Science and Technology
• /
• v.29 no.2
• /
• pp.57-64
• /
• 2016

Many phthalic acid esters (PAEs), including DMP, DEP, DBP, BBP, and DEHP, as well as DEHA are widely used as plasticizers in plastics. An analytical method was developed and used to analyze these compounds at 41 industrial facilities. The coefficient of determination (R²) for each constructed curve was higher than 0.98. The method detection limit (MDL) values were 0.4–0.7 μg/L for PAEs and 0.6 μg/L for DEHA. In addition, the recovery rate was shown to be 77.0–92.3%, while the relative standard deviation was shown to be in the range of 5.8-10.5%. DMP (n = 3), DEP (n = 2), DBP (n = 2), BBP (n = 2), and DEHA (n = 3) were detected in the range of 2.2-11.1% in the influent. DEHP was a predominant compound and was detected at > MDL in both the influent (n = 16, 35.6%) and the effluent (n = 4, 10.0%) at a high removal efficiency (92–100%). The highest levels of residue in industrial wastewater influent were 137.4 μg/L of DEHP at plastic products manufacturing facility, 12.5 μg/L of DEHA at a chemical manufacturing facility, and 14.0 μg/L of DEP at an electronics facility. The highest concentration of effluent was 12.5 μg/L of DEHP at a chemical manufacturing facility, which indicated that the effluent was below the allowable concentration (800 μg/L). Therefore, the levels of PAEs and DEHA that are discharged into nearby streams could not influence the health of the ecosystem.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.4
• /
• pp.377-392
• /
• 2017

A set of BFM (Brute Force Method) simulations with the CMAQ (Community Multiscale Air Quality) model were conducted in order to estimate self-contributions and conversion rates of PPM (Primary $PM_{2.5}$), $NO_x$, $SO_2$, $NH_3$, and VOC emissions to $PM_{2.5}$ concentrations over the SMA (Seoul Metropolitan Area). CAPSS (Clean Air Policy Support System) 2013 EI (emissions inventory) from the NIER (National Institute of Environmental Research) was used for the base and sensitivity simulations. SCCs (Source Classification Codes) in the EI were utilized to group the emissions into area, mobile, and point source categories. PPM and $PM_{2.5}$ precursor emissions from each source category were reduced by 50%. In turn, air quality was simulated with CMAQ during January, April, July, and October in 2014 for the BFM runs. In this study, seasonal variations of SMA $PM_{2.5}$ self-sensitivities to PPM, $SO_2$, and $NH_3$ emissions can be observed even when the seasonal emission rates are almost identical. For example, when the mobile PPM emissions from the SMA were 634 TPM (Tons Per Month) and 603 TPM in January and July, self-contributions of the emissions to monthly mean $PM_{2.5}$ were $2.7{\mu}g/m^3$ and $1.3{\mu}g/m^3$ for the months, respectively. Similarly, while $NH_3$ emissions from area sources were 4,169 TPM and 3,951 TPM in January and July, the self-contributions to monthly mean $PM_{2.5}$ for the months were $2.0{\mu}g/m^3$ and $4.4{\mu}g/m^3$, respectively. Meanwhile, emission-to-$PM_{2.5}$ conversion rates of precursors vary among source categories. For instance, the annual mean conversion rates of the SMA mobile, area, and point sources were 19.3, 10.8, and $6.6{\mu}g/m^3/10^6TPY$ for $SO_2$ emissions while those rates for PPM emissions were 268.6, 207.7, and 181.5 (${\mu}g/m^3/10^6TPY$), respectively, over the region. The results demonstrate that SMA $PM_{2.5}$ responses to the same amount of reduction in precursor emissions differ for source categories and in time (e.g. seasons), which is important when the cost-benefit analysis is conducted during air quality improvement planning. On the other hand, annual mean $PM_{2.5}$ sensitivities to the SMA $NO_x$ emissions remains still negative even after a 50% reduction in emission category which implies that more aggressive $NO_x$ reductions are required for the SMA to overcome '$NO_x$ disbenefit' under the base condition.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.374-381
• /
• 2015

Occurrences of coastal dredged materials are ever increasing due to port construction, navigational course maintenance and dredging of polluted coastal sediments. Ocean dumping of the coastal dredged materials has become virtually prohibited as London Treaty will be enacted as of the year 2012. It will be necessary to treat and recycle the dredged materials that may carry organic pollutants and heavy metals in a reasonable and effective process: collection of the dredged materials, liquid and solid separation, and treatment of organic compounds and heavy metals. In this study we have developed a continuous bioreactor system that can treat a mixture of silt and particulate organic matter using a microbial consortium (BM-S-1). The steady-state operation conditions were: pH (7.4-7.5), temperature ($16^{\circ}C$), DO (7.5-7.9), and salt concentration (3.4-3.7%). The treatment efficiencies of SCOD, T-N and T-P of the mixture were 95-96%, 92-99%, and 79-97%. The system was also effective in removal of heavy metals such as Zn, Ni, and Cr. Levels of MLSS during three months operation period were 11,000-19,000 mg/L. Interestingly, there was little sludge generated during this period of operation. The augmented microbial consortium seemed to be quite active in the removal of the organic component (30%) present in the dredged material in association with indigenous bacteria. The dominant phyla in the treatment processes were Proteobacteria and Bacteroidetes while dominant genii were Marinobacterium, Flaviramulus, Formosa, Alteromonadaceae_uc, Flavobacteriaceae_uc. These results will contribute to a development of a successful bioremediation technology for various coastal and river sediments with a high content of organic matter, inorganic nutrients and heavy metals, leading to a successful reuse of the polluted dredged sediments.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.235-241
• /
• 2003

The effect of ultraviolet (UV) radiation on the characteristics of algae-derived dissolved organic matter (DOM) was examined by comparing the biodegradability and DOM fraction distribution of algal DOM before and after UV exposure. Algal DOM from two axenic cultures of Microcystis aeruginosa and Oscillatoria agardhii were irradiated for 24 h at a UV intensity of 42 W/$m^2$. A complete degradation of algal DOM during the UV exposure did not occur, remaining at constant concentrations of dissolved organic carbon(DOC). After UV exposure, however, microbial degradations were reduced by 17% in M. aeruginosa and 53% in O. agardhii, respectively, and decomposition rates also were two times lower in UV exposed algal DOM. In addition, the chemical compositions of algal DOM altered substantially after UV radiation exposure. The proportions of hydrophilic bases (HiB; protein-like DOM) decreased considerably in both algal DOM sources after UV exposure (16.8% and 20.0% of DOM, respectively), whereas those of hydrophilic acids (HiA; carboxylic acids-like DOM) increased as much as the decrease of the HiB fraction. Capillary ion electrophoresis (CE) analysis showed that several carboxylic acids increased significantly after UV exposure, further confirming an increase in HiA fractions. The results of this study clearly indicate that algal DOM can be changed in its chemical composition as well as biodegradability without complete degradation by UV radiation.

• Journal of Life Science
• /
• v.21 no.8
• /
• pp.1163-1167
• /
• 2011

Excessive alcohol consumption causes various degenerative brain diseases including Alzheimer's disease and Parkinson's disease. Absorbed ethanol is metabolized to acetaldehyde and acetic acid by alcohol dehydrogenase (ADH) and aldehyde dehydrogenase (ALDH). Acetaldehyde is well known as a toxicant through generation of reactive oxygen species (ROS). Therefore, ALDH2 activity may play important roles in the pathogenesis of alcohol-induced brain diseases. In this study, we demonstrated the effects of ALDH2 enzyme activity on lipid peroxidation in brain tissues and urine of mice exposed to ethanol for 8 weeks. Five male, 8-week old Aldh2 (+/+) and Aldh2 (-/-) mice (C57BL/6J strain) in each group were exposed to ethanol for 8 weeks (2 g/kg wt./day) using gavage, and those in the control group received 0.9% saline alone. Thiobarbituric acid reactive substances (TBARS) level, a marker for lipid peroxidation, was measured in whole brain tissue and urine by high performance liquid chromatography. As a result, chronic ethanol treatment did not show any statistical change on the TBARS level of brain tissue in both Aldh2 (+/+) mice and in Aldh2 (-/-) mice. However, following ethanol exposure for 8 weeks in Aldh2 (-/-) mice, the urinary TBARS levels were significantly increased to more than double compared to the pretreatment group. This result was not observed in Aldh2 (+/+) mice. These results suggest that although ALDH2 enzyme activity plays a role in the generation of ROS in the whole body, it does not seem to be important in the pathogenesis of alcohol induced degenerative brain diseases.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.78-86
• /
• 2009

Applicability of CaO and steel slag as stabilizers in the treatment of field and paddy soils near Pungjeong mine contaminated with arsenic and cationic heavy metals was investigated from batch and column experiments. Immobilization of heavy metals was evaluated by TCLP dissolution test. Immobility of heavy metal ions was less than 15% when steel slag alone was used. This result suggests that $Fe_2O_3$ and $SiO_2$, known as the major component of steel slag, have little effect for the immobilization of heavy metal ions due to acidity of TCLP solution. Immobilization of cationic heavy metals was little affected by the ratio of CaO and steel slag while arsenic removal was increased as the ratio of steel slag to CaO increased. In the column test, concentrations of both arsenic and cationic heavy metals in effluents were below the water discharge guideline over the entire reaction period. This result can be explained by the immobilization of cationic heavy metals from the increased pH in soil solution as well as by the formation of insoluble $Ca_3(AsO_4)_2$. From this work, it is possible to suggest that arsenic and cationic heavy metals can be concurrently stabilized by application of both CaO and steel slag.

• Neonatal Medicine
• /
• v.18 no.1
• /
• pp.89-95
• /
• 2011

Purpose: Hypernatremia most frequently occurs in the immature newborn and be severe in association with intraventricular hemorrhage (IVH). This study examined the frequency, onset and risk factors of hypernatremia, and the relationship between hypernatremia and IVH in very low birth weight (VLBW; <1,250 g) infants. Methods: We retrospectively reviewed the medical records of 55 VLBW infants admitted between January 2006 and December 2009 to the neonatal intensive care unit of Wonkwang University Hospital and who survived over 7 days. Serum sodium concentration, sodium intake, fluid and weight loss, as suggested risk factors of hypernatremia, and the incidence of IVH were evaluated. The infants were divided into a hypernatremia group (${\geq}$150 mEq/L) and nonhypernatremia group, and were compared. Results: Incidence of hypernatremia in the VLBW infants was 52.7%, and mean starting time of hypernatremia was 2.8${\pm}$1.3 days. There were no differences in the sodium and fluid intake between the two groups. Weight loss at day 3 after birth was significantly higher in the hypernatremia compared to the nonhypernatremia group (P<0.05); thereafter weight loss was non-significantly higher. The incidence of IVH in VLBW infants was 38.2%, and the difference between the two groups was not significant. Conclusion: Hypernatremia occurs commonly in VLBW infants and is most commonly caused by weight loss in the early days after birth. Incidence of IVH is not likely influenced by hypernatremia with marginally elevated sodium concentration.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.90-95
• /
• 2008

In this study, a combined process of sequential anaerobic-aerobic digestion (SAAD), fluidized-bed bioreactor (FBBR), and ultrafiltration (UF) for the treatment of small scale food waste leachate was developed and evaluated. The SAAD process was tested for performance and stability by subjecting leachate from food waste to a two-phase anaerobic digestion. The main process used FBBR composed of aerators for oxygen supply and fluidization, three 5 ton reaction chambers containing an aerobic mesophilic microorganism immobilized in PE (polyethylene), and a sedimentation chamber. The HRTs (hydraulic retention time) of the combined SAAD-FBBR-UF process were 30, 7, and 1 day, and the operation temperature was set to the optimal one for microbial growth. The pilot process maintained its performance even when the CODcr of input leachate fluctuated largely. During the operation, average CODcr, TKN, TP, and salt of the effluent were 1,207mg/L, 100mg/L, 50 mg/L, and 0.01 %, which corresponded to the removal efficiencies of 99.4%, 98.6%, 89.6%, and 98.5%, respectively. These results show that the developed process is able to manage high concentration leachate from food waste and remove CODcr, TKN, TP, and salt effectively.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.82-92
• /
• 2020

Since swine wastewater contains high concentrations of nutrients and heavy metals, it deteriorates water quality when discharged. Compared to conventional methods, bioremediation can be a promising method for its treatment. Specifically, microalgae have the potential to remove these pollutants. In this study, the removal of nutrients (nitrogen (N) and phosphorus (P)) and heavy metals (copper (Cu) and zinc (Zn)) from swine wastewater by Ankistrodesmus bibraianus was evaluated and the organism's optimal growth conditions were investigated. The optimal growth conditions were established at 28℃, pH 7, and light and dark cycles of 14:10 h. The removal efficiencies of N and P by a single treatment (500, 1,000, 5,000, and 10,000 mg L^-1) ranged from 22.9 to 80.6% and from 11.9 to 50.0%, respectively. The removal efficiencies of N and P in the binary treatments ranged from 16.4 to 58.3% and from 7.80 to 49.8%, respectively. The removal efficiencies of Cu and Zn by a single treatment(10, 30, and 50 mg L^-1) ranged from 15.5 to 81.5% and from 6.28 to 34.3%, respectively. Similarly, the removal efficiencies of Cu and Zn in the binary treatments ranged from 16.7 to 74.5% and from 5.58 to 27.5%, respectively. In addition, the study showed the optimal growth conditions for microalgae and the removal efficiency of nutrients (N and P) and heavy metals (Cu and Zn), which could be applied to swine wastewater. Based on the results in this study, it appears that Ankistrodesmus bibraianus could be used for the removal of nutrients and heavy metals present in swine wastewater.