• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1213-1222
• /
• 2008

In this paper, the isolation of the IBBD array antenna is analyzed as functions of the element spacing and the height of the flat plate inserted between array elements for the intelligent antenna system. It is found that the isolation between array elements improves with increasing the array spacing. The array configuration with the plate between the elements is enhanced by about 13 dB more In the isolation than the one without the plate. The plate-inserted $4{\times}4$ elements IBBD array antennas are fabricated and the radiation characteristics are measured and analyzed for the various heights of the plate. It is found that the gain decreases slightly with increasing the height of plate but the shape of radiation pattern does not show a remarkable change.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.458-464
• /
• 2016

This paper proposes the compensation method which decreases the radiation pattern distortion caused by the mutual coupling in an array antenna. If the element distance of an array antenna decreases, the radiation pattern could be distorted by the strong mutual coupling, which changes the magnitude and phase of input signals and causes an unwanted radiation pattern. To remove the pattern distortion, compensated input signals are inserted in an array antenna. The magnitude and phase of input signals are determined by Particle Swarm Optimization (PSO) algorithm. A $4{\times}1$ dipole array antenna with omnidirectional elements is used to confirm the validity of the algorithm, where each element is placed in 0.2 wavelength to evoke the strong coupling. After input signals are optimized by PSO, it is found that the compensated radiation results in the same as the ideal case.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.973-984
• /
• 1999

This paper presents a method of moments with the transmission line theory to analyze the sleeve dipole array antennas and analyses characteristics of that. There were several considerations for analysis of the method of moments. First, the method of moments were applied at both of the sleeve dipole elements and the coaxial line because the current flows on both of them. Second, the feed voltages of each sleeve dipole element were obtained by using a transmission line theory because the feeding structure is fed by coaxial line in series. Third, the series reactance between the coaxial line and the open side of the sleeve was considered as impedance loading on the antenna. The radiation patterns and current distributions from the numerical results were considered as variation of the feed distances and frequencies. To verify the validity of our method, 4 elements sleeve dipole array antennas with 1 λg distance were fabricated and measured, and then the measured radiation patterns were compared with the numerical results. The measured results were confirmed a good agreement with the numerical results.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.794-801
• /
• 2000

The effect of chain length and packing density of intercalated surfactants, annealing temperature, and annealing time on static melt intercalation of thermoplastic polymers was examined using x-ray and FTIR spectroscopy. Although melt intercalation of polymers was not successful when alkyl chains in organosilicates form a lateral monolayer structure, the type and structure of surfactants could not much affect final interlayer distances of most polymer/silicate hybrids. As annealing time increases, interlayer distance in organosilicates increases while the dispersity of the spacing between silicate layers decreases. However, the dispersity of interlayer spacing as well as interlayer distance in organosilicates increase with annealing temperature.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.1
• /
• pp.13-27
• /
• 2016

The characteristics of the rock cleavage inherent in Jurassic granite from Geochang were analysed. The phases of distribution of microcrack spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. The evaluation for the six directions of rock cleavages was performed using nine parameters such as (1) frequency of microcrack spacing(N), (2) frequency ratio(${\leq}1mm$ and 4 mm >) to total spacing frequency(N:191), (3) spacing ratio(${\leq}1mm$) to total spacing(118.49 mm), (4) mean spacing($S_{mean}$), (5) difference value($S_{mean}-S_{median}$) between mean spacing and median spacing($S_{median}$), (6) density of spacing, (7) median spacing, (8) reduction ratio of spacing frequency to length frequency and (9) magnitude of exponent(${\lambda}$ and b) related to the distribution type of diagram. Especially the close dependence between the above spacing parameters and the parameters from the spacing-cumulative frequency diagrams was derived. The results of correlation analysis between the values of parameters for three rock cleavages and those for three planes are as follows. The values of (I) parameters(1, 2 and 3), (II) parameters(4, 5 and 6), (III) parameter(7), (IV) parameter(8) and (V) parameter(9) show the various orders of H(hardway, H1+H2) < G(grain, G1+G2) < R(rift, R1+R2), R < G < H, R < H < G, G < H < R and H < G < R, respectively. On the contrary, the values of the above four groups(I~IV) of parameters for three planes show reverse orders. This type of correlation analysis is useful for discriminating three quarrying planes. Six spacing-cumulative frequency diagrams were arranged in increasing order on the value of main parameter($S_{mean}-S_{median}$). These diagrams show an order of R2 < R1 < G2 < G1 < H2 < H1 from the related chart. In other words, the above six diagrams can be summarized in order of rift(R1+R2) < grain(G1+G2) < hardway(H1+H2). These results indicate a relative magnitude of rock cleavage related to microcrack spacing. Especially, the above main parameter could provide advanced information for prediction the order of arrangement among the diagrams.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.447-450
• /
• 2002

음향수조 내에 일정한 간격으로 배열된 단순 모양의 산란체들로부터 획득된 후방산란 신호를 분석하여 산란체 간격(scatterer spacing)을 추측 할 수 있는 방법을 연구하였다. 수신신호의 산란특성을 켑스트럼 피크(cepstral peaks)를 이용하여 산란체 간격으로 해석하였다. 임펄스 응답신호를 이용한 수치계산으로 산란체 간격 추정방법을 검증한 후, 수조 실험으로 획득한 후방 산란 신호에 적용해 그 결과를 비교해 보았다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2151-2156
• /
• 2006

Beamforming for underwater acoustic communication (UAC) is affected by the broadband feature of UAC signal, which has relatively low currier frequency as compared to the signal bandwidth. The narrow-band assumption does not hold good in UAC. In this paper, we discuss a broadband FIR beamformer for UAC using the baseband equivalent way signal model. We consider the broadband FIR beamformer for QPSK UAC with carrier frequency 25kHz and symbol rate 5kHz. Array geometry is a uniform linear way with 8 omni-directional elements and sensor spacing is the half of the carrier wavelength. The simulation results show that the broadband n beamformer achieves nearly optimum signal to interference and noise ratio (SINR) and outperforms the conventional narrowband beamformer by SINR 0.5dB when two-tap FIR filter is employed at each sensor and the inter-tap delay is a quarter of the symbol interval. The broadband FIR beamformer performance is more degraded as the FIR filter length is increased above a certain value. If the inter-tap delay is not greater than half of the symbol period, SINR performance does not depend on the inter-tap delay. More training period is required when the inter-tap delay is same as the symbol period.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.223-230
• /
• 2004

A method for measuring array manifold which is the array antenna response of incident signal is presented. Array manifold measurement procedure by the presented method is explained for UCA(Uniform Circular Array), and spatial spectrum of 300 ㎒ tone signal incident on UCA is estimated by MUSIC algorithm in which spatial spectrum peak is searched with measured array manifold. Spatial spectrum estimation using array manifold measured by the proposed method shows superior performance to calculated array manifold.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.46-54
• /
• 1994

In this paper, an analysis and design method is proposed, which is to improve the directivity of microstrip array antennas conformed to a cylindrical surface. In the case of forming an arc-array in the circumferential direction on a circula-cylinder surface, the circular-cylinder can be approximated to a polygonal-pillar and on each pillar-planes the sub-arrays, Dolph-Tschebyscheff array and uniform array with a beam steered in the desired direction, would make a sharp directivity for the total cylin- drical array antenna. And the radiation pattern according to the type of its sub arrays is analyzed and compared using the cylindrical-cavity codel. A cylindrical microstrip array antenna, with 12 elements and uniform arra as a sub-array which have an equal distance$\lambda_0$/2between the elements, is manufactured and conformed to a cylinder with radius of 6 The measured data of side lobe level, HPBW and FNBW are - 13dB, $9^{\circ}$, and $15{\circ}$, ,respectively. This result shows a good improvement on the directivity comparing with a linear array.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.181-185
• /
• 1993

물 속에 만들어진 공기방울들은 각자 자신의 반지름에 반비례하는 공진주파수로 음파를 방출하며, 많은 공기방울들이 모인 공기방울 집단은 집단의 전체 크기에 반비례하는 집단 공진주파수를 가진다는 현상이 그동안 연구되어 왔다. 그러나, 수십, 수백 개의 유한한 개수를 가진 공기방울들의 음파방출 주파수 특성 연구는 부족한 실정이다. 본 연구에서는 수중에 일차원 배열의 공기방울들을 발생시켜 공기방울들에서 나오는 음파방출 주파수를 측정하였다. 수중에 형성된 공기방울들은 그들 간에 거리 간격이 존재하므로 본 연구에서는 공기방울들 간의 상호작용이 변화한다고 간주한 유효 결합 조화진동자 모형을 새로이 만들어 해석하였으며, 실험값과 좋은 이치를 보여주었다.