• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.247-253
• /
• 2004

As a large scale port development in coastal waters proceeds step by step and populations in the vicinity of port are getting increased, the issue on "how to dispose the treated municipal water and wastewater in harbor" brings peoples′ concern. The submarine outfall system discharges the primary or secondary treated effluent at the coastline or in deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding sea water and becomes very dilute. We intended in this paper to investigate the impact on dilution of effluent and the behavior of flume under the conditions of the seasonal and spatial temperature variations, which have not been noticeable in designing effective marine outfall system. To predict and analyze the behaviour and dilution characteristics of plume not just with the effluent temperature, but also with the seasonal variation of temperature of surround water and tidal changes, CORMIX(Cornell Mixing Zone Expert System)-GI have been applied. The results should be used with caution in evaluation the mixing zone characteristics of discharged water. We hope to help for the effective operation of outfall system, probable outfall design, protection of water quality, and warm water discharges from a power plant, etc.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.132-132
• /
• 2018

홍수피해 발생 시 각 지역의 특성에 따라 피해의 정도가 다르게 나타나고 있다. 도시지역의 경우 포장도로로 인하여 불투수 면적이 넓어 배제 시설의 허용 용량을 초과하는 강우 발생 시 지표면 위로 유량이 누적된다. 특히 농촌지역에 비해 도시지역에서 국지적으로 기습적인 강우에 빈번히 침수피해가 발생한다. 우리나라 도시지역은 인구와 건물이 밀집되어 재산과 인명피해 및 교통체증 등으로 인한 간접피해 등 농촌지역에 비해 더 큰 피해가 발생할 수 있다. 도시 지역의 침수 피해 저감을 위해 우수 유출 저감시설과 내수배제 시설을 설치하여 우수의 유출을 지연시키거나 인위적으로 방류부 하천으로 방류시키는 방법이 있지만 이러한 시설의 설치에는 막대한 비용이 필요하며, 내수배제시설이 설치된 장소에 따라 침수현상이 다르게 나타나 저감시설 설치 전 공간적, 효율적으로 설치 가능한 장소와 침수 저감 효율에 대한 분석이 필요하다. 본 연구는 도림1 배수분구를 대상으로 XP-SWMM모델을 이용하였으며, 2010년 09월 21일 침수 발생 당시의 강우를 적용하여, 연구대상지역의 도시유출해석을 진행하였다. 또한, 어린이 공원과 학교운동장에 가상지하저류조를 설치하였을 시 침수저감 효과에 대하여 연구를 진행하였으며, 다양한 지하저류조 설치 시나리오에 따른 침수저감효과를 수심별 침수면적으로 나타내어 분석을 실시하였다. 본 연구를 통해, 도심지 지하 저류시설 도입의 기초자료로 활용될 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.381-381
• /
• 2022

본 연구에서는 실시간적으로 계측, 수집된 자료를 이용하여 도시지역 물순환 전 과정에 대한 개별 물리모델 구동을 실시하고, 수자원의 양적인 흐름을 연계하여 표출하는 도시 수자원 사이버 물리시스템(CPS) 시뮬레이터에 활용되는 입력인자 변동성 분석을 실시하였다. 도시 수자원 실시간 CPS 시뮬레이터의 시나리오 분석을 위한 변동입력인자는 취수량, 타 배수지 구역 공급량, 대상지역 수용가 사용량 변화, 오수전환률 및 오수배출 지연시간 등으로 설정하였으며, 변동입력인자 변화모의를 위한 발현가능한 시나리오를 구축하고, 분석결과를 정량화하여 제시하였다. 본 연구에서 활용된 발현가능한 시나리오는 가뭄 등 취수제한상황에 따른 양적인 공급 흐름모의, 수용가 물 사용 패턴 변화(예, 코로나로 인한 비대면 재택 근무 증가 등)에 의한 상수, 오수변화량 모의 등으로 설정되었다. 분석 결과 다양한 입력인자의 변화에 따른 도시수자원 흐름변화에 영향을 주는 구성요소의 파악과 정성, 정량적 영향을 직관적, 정량적으로 평가할 수 있음을 확인하였다. 도출된 변동성 평가 결과는 설정된 시나리오가 현실화될 경우 효과성 높은 대응책을 마련하는데 활용이 가능하다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.2
• /
• pp.84-90
• /
• 2018

Cultivation of high-quality forage crop by using fallow field during winter is required for national high feed self-sufficiency and establishment of self-supply system of high-quality forage crop. Field experiments for cultivation of high-quality winter forage crop were conducted at the paddy and upland fields in Cheonan and Anseong city with treatments of single Italian ryegrass(IRG) and IRG mixed with forage barley at the paddy field and of single forage barley and forage barley mixed with IRG at the upland field in the Mid-west plain. Several cultivation conditions such as broadcasting IRG seed under standing rice, sowing time, tillage method, drainage condition, mixed sowing with forage barley were compared to know the change of growth, yield and quality of winter forage crop. In particular, over-wintering rate and dry matter yield were decreased significantly in late-sown IRG and moisture-stressed forage barley. Yield and quality of forage crops were increased by sowing after tillage, mixed sowing of IRG with barley at the paddy field with good drainage. High yield as much as dry matter $10MT\;ha^{-1}$ with high feed value could be obtained by early sowing of feed barley mixed with IRG at the upland field. Cultivation conditions such as early sowing, sowing after tillage, drainage management are required for higher dry matter yield, quality and stable cultivation of winter forage crops in the mid-west plain of Korea.

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.59-72
• /
• 1985

This paper deals with the numerical analysis by the (mite element method introducing Biot's theory of consolidation and the modified Cambridge model proposed by Roscoe school of Cambridge University as constitutive equation and using Christian-Boehner's technique. Especially, time interval and division of elements are investigated in vies of stability and economics. In order to check the validity of author's program, the program was tested with one-dimensional consolidation case followed by Terzaghi's exact solution and with the results of the Magnan's analysis for existing banking carried out for study at Cubzac-les-ports in France. The main conclusions obtained are summarized as follows: 1. In the case of one-dimensional consolidation, the more divided the elements are near the surface of the foundation, the higher the accuracy of the numerical analysis is. 2. For the time interval, it is stable to divide 20 times per 1-lg cycle. 3. At the element which has long drain distance, the Mandel-fryer effect appears due to time lag. 4. Lateral displacement at an initial loading stage predicted by author's program, in which the load was assumed as not concentrative. but rather in grid form, is well consistent with the value of observation. 5. The pore water pressure predicted by author's program has a better accordance with the value of observation compared with Magnan's results. 6. Optimum construction control by Matsuo-Kawamura's method is possible with the predicted lateral displacement and settlement by the program.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.313-321
• /
• 2017

We aimed to develop commercialization process of encapsulation which is superior in productivity compared to existing methods by using sodium alginate. Also, in the same process, sodium alginate with chitosan was used to encapsulate lactic acid bacteria with the same process and then the viable cell counts of the two encapsulated lactic acid bacteria were compared. As a test result of the fluidized drying process developed by the present researchers, it was found that the drying time was shortened by 15 to 20 hours compared to the freeze drying method, but the number of viable lactic acid bacteria was about 75% as compared with freeze drying. However, considering the cost and time of drying, it can be confirmed that the commercialization process is possible by the fluidized bed drying method. When the number of viable cells of Ca-alginate capsule and Chitosan-alginate capsule were compared, it was confirmed that there were about $1{\times}10^9$ or more bacteria in the former and about $1{\times}10^3$ in the latter. The lactic acid bacterium capsules prepared by the present technique were stable for 96 hours or more at pH 4.65 and 6.01, but disappeared within 1 hour at pH 7.07 and 8.35. This suggests that the disintegration of lactic acid bacteria can be easily occurred in small and large intestine.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.247-249
• /
• 2005

최근 디지털 TV, DVD 플레이어, 홈시어터와 같은 디지털 A/V 기기들을 통합하여 멀티미디어 컨텐츠를 서비스 받는 홈 네트워크 기술에 대한 관심이 높아지고 있다. 이러한 환경에서 UpnP를 이용한 디지털 기기들의 상태를 모니터링하고, 사용자의 요청과 제어 명령을 전달하여, 멀티미디어 컨텐츠를 서비스 받을 수 있도록 하는 연구는 매우 중요하다. 그러나 UPnP는 TCP/IP 기반의 프로토콜을 사용하기 때문에 사용자 인터랙션에 의한 전송 지연 시간이 발생한다. 그러므로 본 논문에서는 셋탑 박스에 최적화된 UPnP AV 시스템을 구현하고 AV 컨텐츠의 효율적인 재생을 위한 UPnP프레임워크의 재생 기법을 제안한다. UPnP AV 시스템은 미디어 서버가 있고, 미디어 서버에 저장된 비디오/오디오 파일 등을 전송받아 재생하기 위한 셋탑 박스에는 컨트롤 포인트와 UPnP 미디어 렌더러의 통합 모델이 탑재된다. 이러한 기법은 다양한 기기를 제어하고 호환성을 제공하는 UPnP프레임워크가 될 수 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.434-440
• /
• 2013

Generally, the envelope of a freeform building is composed of a structure made with rectangular or C-shaped steel pipe, and steel or aluminum panel finishes on the structure. However, these construction methods increase material loss and cost and time. There are also numerous cases of misunderstanding of design and difficulties in construction, which frequently cause construction errors. Such construction errors decrease construction productivity, resulting in poor construction quality and the need for rework, as well as cost and time overruns. To solve the problem, this study proposes a 3D coordinate control technology for freeform structure implemented through a CNC(Computerized Numerical Control) Twisted tube method, and by extension, develops a BIM-based envelope construction method for freeform building.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.27-37
• /
• 2007

The purpose of this study is to propose a method to predict the minimum curing time of early age concrete required to prevent frost damage. Tests were performed to examine major factors, which affect the compressive strength of concrete frozen at early ages and investigate the source of frost damage at early age concrete. The results from the tests showed that the loss rate of compressive strength decreases as the beginning time of frost damage was delayed and water-cement ratio was lower. In addition, the test results also showed that concrete made with type III cement was less susceptible to frost damage than concrete made with ordinary Portland cement and frost damage occurred through the formation of ice lenses. When early age concrete is being damaged by frozen, a phase transition into ice of free water presented at the capillary pores of the concrete gives a reason for the decrease of compressive strength. Accordingly, the frost resistance of fresh concrete can be determined based on the saturation degree of the capillary pores. The method to predict the minimum curing time was suggested using the concept of critical saturation degree of the capillary pores.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.188-193
• /
• 1999

Transport of pollutants in aquifer largely depends on groundwater flow which is governed by aquifer hydraulic parameters. Determination of these parameters and associated groundwater modeling become essential for adequate remediation of contaminate groundwater. The objective of this paper is to analyze groundwater flow and determine the optimum hydraulic parameters by performing groundwater modeling based on sensitivity analysis for unconfined sandy gavel aquifer constructed in a laboratory scale under various boundary condition. Results revealed that the simulated drawdown was lower than the observed drawdown irrespective of boundary conditions. and specific yield (S$_{y}$) had less effect on the grondwater flow than permeability (K) in the aquifer. Water balance analysis showed that the measured drawdown in neighboring observation wells during pumping was higher than either simulated or recovered water table. The indicated that a difference might exist in the water tables between aquifer and wells. The difference was investigated by time domain reflectometry (TDR) measurements on water contents in the region of water table and capillary fringe, and explained by a delayed response of water table during gravitational drainage as the water table was lowered as a result of pumping.g.