• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.17-28
• /
• 1999

In this paper, an ASIC emulation system called ACE (ASIC Emulator) is proposed. It can produce the prototype of target ASIC in a short time and verify the function of ASIC circuit immediately The ACE is consist of emulation software in which there are EDIF reader, library translator, technology mapper, circuit partitioner and LDF generator and emulation hardware including emulation board and logic analyzer. Technology mapping is consist of three steps such as circuit partitioning and extraction of logic function, minimization of logic function and grouping of logic function. During those procedures, the number of basic logic blocks and maximum levels are minimized by making the output to be assigned in a same block sharing product-terms and input variables as much as possible. Circuit partitioner obtain chip-level netlists satisfying some constraints on routing structure of emulation board as well as the architecture of FPGA chip. A new partitioning algorithm whose objective function is the minimization of the number of interconnections among FPGA chips and among group of FPGA chips is proposed. The routing structure of emulation board take the advantage of complete graph and partial crossbar structure in order to minimize the interconnection delay between FPGA chips regardless of circuit size. logic analyzer display the waveform of probing signal on PC monitor that is designated by user. In order to evaluate the performance of the proposed emulation system, video Quad-splitter, one of the commercial ASIC, is implemented on the emulation board. Experimental results show that it is operated in the real time of 14.3MHz and functioned perfectly.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.159-164
• /
• 2016

The goal of this study is to implement a communication system that can monitor the status of the nacelle using the power cable itself, without the dedicated communication lines such as an UTP cable and optical fiber for the offshore wind turbine. An inductive coupling powerline communication system for a MW class offshore wind turbine was proposed and its communication performance was demonstrated. The inductive couplers was designed for operation at up to 500 A using a ferrite composite materials. Field test was carried out on the wind farms of Jeju island. Using the iperf communication test program, we have obtained more than 15 Mbps data transmission rate through the 100 m power cable that was installed between the nacelle and the bottom of the power converter. In the data transmission stability test for a week, there was no failure ever. The minimum transmission rate was 15 Mbps and the average data rate was about 20 Mbps. Next, we have installed an infrared camera inside the nacelle in order to measure the temperature distribution and variation of the nacelle. The real-time thermal image taken by the camera was successfully sent to the monitoring system without error.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.54-59
• /
• 2010

This paper present to study the guidance system as localization technique using sensor fusion and line tracking technique using virtual line for AGV(autonomous guided vehicle). An existing AGV could drive on decided line only. And representative guidance systems of such guidance system are magnet-gyro guidance and wired guidance. However, those have had the high cost of installation and maintenance, and the difficulty of system change according to variation of working environment. To solve such problems, we make the localization system which is fused with a laser navigation and gyro, encoder. The system is robust against noise, and flexible according to working environment through sensor fusion. For line tracking of laser navigation without wire guidance, we set the virtual line in program, and design the driving controller based on difference of angle and distance between AGV's position and decided virtual line. To experiment, we use the AGV which is made by ourselves, and experiment the line tracking repeatedly on same experimental environment. In result, maximum distance error between decided virtual line and AGV's position was less than 49.93mm, and we verified that the proposed system is efficient for line tracking of actual AGV.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.883-889
• /
• 2006

In this paper, parasitic resonance modes generated in a conductor backed coplanar wave guide(CBCPW) and stripline band pass filter(BPF) and the oscillation phenomena of a 40 GHz power amplifier module(PAM) are analyzed and several methods to suppress them are presented for low-temperature co-fired ceramic(LTCC) based millimeter-wave RF System-in-Package(SiP) applications. Parasitic rectangular wave guide(RWG) modes of the CBCPW structure are completely suppressed in the operation frequency band by decreasing the distance between its vias and by increasing the mode frequency. In the stripline structure, RWG resonance modes are clearly eliminated by removing some vias facing each other and by placing them diagonally. In the case of the 40 GHz PAM, in order to reduce a cross talk due to radiation that is generated from interconnection discontinuities, high isolation structures such as embedded DC bas lines and CPW signal lines are used and then the oscillated PAM is improved.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.1
• /
• pp.11-20
• /
• 2008

Home network service, which is a part of Ubiquitous application service provides remote control and monitoring service, other appliance and peristaltic service, security service of appliance is connected to network in the home. <중략> By using gateway which is implemented undertook control of each function and using main server for controlling and monitoring of appliance, implemented system which is able to control the appliance in home from inter/outside is implemented.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3256-3263
• /
• 2011

Large scaled railway freight transportation facilities in harbors are located in Busan port and Gwangyang port. The port rail depot plays an important role as the departure and destination function of railway logistics. However, presently, it is not relatively vitalized because it is not reflect the railway freight transportation's characteristics such as scale of railway tracks or yards area. In addition, even if port rail depot is vitalized, processing capacity is already saturated. Therefore, it is difficult to increase rail transport quantity. To activate railway container transportation business, it is very necessary to recalculate the facility size of port rail depots. Focused on the Busan new port rail depot, this paper analyzes the problems of port rail depot facility that has currently opened and finds some alternatives to resolve them.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.41-45
• /
• 1985

A degradation of the signal-to-noise ratio (SNR) in a digital moving target indicator system (DMTI System) can be Improved by weighting of the DMTI output pulses before the integration process. and it Is shown that the signal-to-noise ratio Is unproved as the nunlber of delay line cancellers. It is Known that signal-to-noise ratio obtained with optimum weighting is greater than that obtained with binomial weighting. An improvement performance of the signal-to-noise ratio for each case is presented through the results or a computter simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8C
• /
• pp.792-802
• /
• 2002

One of the technologies which accelerate data transmission rate on the Internet is ADSL(Asymmetric Digital Subscriber Line), which enables the fast growth of the information age by providing infrastructures for the high speed Internet access. The network architecture of the ADSL service is the FTTC(Fiber To The Curb) which consists of fiber netwoks and copper based subscriber lines. The ADSL is a technology that utilizes the existing subscriber line efficiently. In the FTTC architecture, the major factors that degrade the quality of the ADSL service are the copper wires in the subscriber loops. This paper examines the characteristics of the subscriber lines that affect the high speed Internet access in deploying the ADSL services and also analyzes the mutual relationships between each line characteristic and its performance.

• 전자공학회논문지 IE
• /
• v.43 no.3
• /
• pp.34-40
• /
• 2006

Usually, fluid or fuel supply device need space to need special sensor to control motor, attaches with ancillary equipment to attach sensor. Also, difficult point follows need signal line and other circuit etc. In this paper, used that proposed control system that use hall sensor to solve discomfort and problem and difference control principle of system happens in current flow according to motor action step. Also, could reduce breakdown by sensor establishment, reduce material costs and personnel expenses as well as control system superior. Auto-pumping system sees that will can apply, develop several kind of device that use system hereafter to all fluid supply systems through soft-ware adaptation.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.320-328
• /
• 2005

Government is supporting development of home networking. But, this new system is much expensive to introduce in the home. And limit for establishment is so many in the home. Therefore, in this paper, Present direction of home automation system that can have high efficiency into low expense, induction of automation system is easied in the home. Also, install can be easy and do remote control in PC, HP, PDA because use PLC or HN RF, DB.