• 제목/요약/키워드: 방탄

검색결과 114건 처리시간 0.022초

개인 방탄·방검복 시스템 체계개발 선행연구 (A Precedent Research on Personal Armor and Anti-stab Wearing System Development)

  • 김훈;황태선;허영택;이창배
    • 한국기계기술학회지
    • /
    • 제20권6호
    • /
    • pp.879-885
    • /
    • 2018
  • Precedent research and development of personal armor and anti-stab wearing system has been conducted since 2018 as a part of the government-affiliated cooperative development project to create the best utilization of present technology and achievement according to the civil and military technical cooperation project promotion law. At present, the armor system operated by the ROK(Republic of Korea) military, the police, and the marine police is utilizing only basic armor using armor vests and plates. Therefore it is necessary to develop the personal armor and anti-stab wearing system which is suitable for various tasks in army with maximum protection capability. In this paper, we analyzed the study about international technologies, market trends of the developed countries and scope of research, utilization plan, R&D results for the best armor and anti-stab wearing system development.

업계동정

  • 한국전기산업진흥회
    • NEWSLETTER 전기공업
    • /
    • 97-15호통권184호
    • /
    • pp.24-26
    • /
    • 1997
  • PDF

방탄용 Spectra 섬유 강화 복합재료에 관한 연구 (A study on the Spectra reinforcement composite of its ballistic performance)

  • 강은영;윤영기;윤희석
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2001년도 추계학술발표대회 논문집
    • /
    • pp.83-86
    • /
    • 2001
  • This paper presents an investigation of the contribution of fibers in energy absorption during impact and the effect of resin types on properties of the high strength polyethylene (Spectra-900 PE) composite. In high strength polyethylene fiber, main impact energy absorbing mechanism was tensile breakage and deformation of fiber. Two types of resin were examined : Unsaturated polyester (UP) and Epoxy. Tensile and 3-point bending test have been performed to investigate the changes of mechanical properties. In tensile and flexural testes, the Spectra Composite prepregged with UP showed higher properties than Spectra Composite prepregged with epoxy.

  • PDF

복합재료의 방탄충격에너지 흡수에 관한 연구 (A study of ballistic impact energy absorbing mechanism of composites)

  • 강은영;윤영기;황도인;윤희석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.773-776
    • /
    • 1997
  • This paper presents an investigation of the energy absorption of composite laminates during ballistic impact. Three components are responsible for the absorption of energy-the tensile failure of fiber, the elastic deformation of the composite, the delamination of composite laminates. The ballistic limit, V/sub 0/, of the laminates is determined using a previous model implemented to determine the energy absorption of the three components listed above. The size of the deformed zone during impact was estimated by an approximate solution for impacts on plates. The carbon/epoxy plates were examined for this research.

  • PDF

고속충격에 의한 세라믹/섬유강화 복합재료의 동적파손 거동 (Dynamic Failure Behavior of Ceramic/Fiber-Reinforced Composites under High Speed Impact Loading)

  • 김희재;육종일;이승구
    • 한국재료학회지
    • /
    • 제7권9호
    • /
    • pp.795-804
    • /
    • 1997
  • 전면재를 알루미나, 후면재를 Kevlar또는 S-2 유리 섬유강화 복합재료로 접합한 이종재료 장갑에 대하여 알루미나의 두께 변화와 복합재료의 적층구조에 따른 고속충격 특성 변화에 대하여 연구하였다. 또한 시험재료의 동적 관통현상을 분석하기 위하여 고속촬영기법이 이용되었다. 시험결과, 전면재인 알루미나는 충격탄자 직경의 80% 상당하는 두께(본 실험에서는 6nm)인 경우 양호한 방탄성능을 보였다. 후면재인 복합재료는 섬유를 alternating 주조로 적층한 경우가 laminar구조로 적층한 것에 비하여 더 우수한 방탄성능을 나타내었다.

  • PDF

전단농화 유체가 함침된 케블라 방탄재의 충돌 성능해석 (Collision Performance Analysis of Kevlar Bulletproof Material Impregnated with Shear Thickening Fluid)

  • 조희근
    • 한국기계가공학회지
    • /
    • 제16권6호
    • /
    • pp.21-28
    • /
    • 2017
  • This study investigated Kevlar fabric impregnated with shear thickening fluid (STF). The STF performance was assessed by comparing bullet-proof characteristics of STF impregnated and pure Kevlar material. The analysis employed a circular steel ball as the nominal warhead, and bulletproof characteristics were evaluated by the warhead residual velocity. Various initial velocity conditions were employed, with different bulletproof characteristics apparent for each velocity region. The results of this study provide effective data for future bulletproof material design and application.

침수조건에 따른 방탄재료의 성능변화와 파괴거동 분석 (Failure Mechanism Analysis and Performance Change of Ballistic Resistance Material on Wet Condition)

  • 태원석;김건인
    • 한국군사과학기술학회지
    • /
    • 제16권6호
    • /
    • pp.803-810
    • /
    • 2013
  • In this paper, we have verified the performance of ballistic resistance material on wet condition. Considering Korea terrain, soldiers may face many rivers and streams. However, bullet-proof jacket has no waterproofing and there's no water-proof standard in Military. Wearing wet bullet-proof jacket, soldiers can't be protected properly because of the decrement of jacket. Thus, we measure the performance of existing material on wet condition and analyze failure mechanism in order to indicate factors to improve bullet-proof jacket.