Proceedings of the Korean Fiber Society Conference
/
1998.04a
/
pp.190-196
/
1998
섬유공정은 대부분 섬유물이 연속적으로 이동하는 가운데 기계적인 처리 또는 건식/습식가공이 행하여진다. 이러한 공정에서는 원료의 공급속도 (feeding speed)와 생산되는 섬유제품의 방출속도(delivery speed)사이에 정확한 속도비를 유지하는 것이 필요하다. 공급속도와 방출속도와의 차이는 공정처리를 받고 있는 섬유물에 이동방향으로 긴장, 느슨함 또는 중첩을 일으킨다.(중략)
Proceedings of the Korean Society of Applied Pharmacology
/
1993.04a
/
pp.103-103
/
1993
목적: Estroge 결핍으로 나타나는 폐경기의 주요 증상을 경감 치료하기 위해, estrogen경구 투여시 위장장애, 위장에서의 대사, 간 초회효과, 자주 투여로 인한 환자의 불편 등의 단점이 있나, 이러한 점을 개선하기 위한 투여경로의 하나로 피부를 통해 일정약물을 장기간 일정속도로 송달시키는 경피 흡수 시스템의 개발이 필요하다. 따라서 (EE)의 장기제어방출을 위해 ethylene vinyl acetate (EVA)를 사용하여 장기 제어방출 및 경피 흡수의 최적화 조건을 설정하여 경피흡수 시스템을 위한 막의 개방을 목적으로 한다. 방법: VA 함량이 18-40%까지의 EVA를 사용하여 EE를 함유한 matrix를 casting 방법으로 제조하고 변형된 Keshary-Chien cell을 이용하여 방출실험을 실행하였다. 이때 방출에 미치는 여러 가지 인자로서 EVA 주의 VA함량, 막의 두께, receptor 중 PEG 400의 용량비율, 방출 매개체의 온도, loading 된 약물의 량 등에 대해 검토하였다. 그리고 점개한 mouse skin에 대한 투과 실험을 행하고 이에 미치는 PEG 400과 자질층의 역할을 검토하였다. 결과: EE의 용해도는 saline so PEG 400의 용량 비율이 증가함에 따라 지수 함수적으로 증가하였다. 그리고 VA 함량이 증가될수록, PEG 400의 용량비율, 방출 매개체의 온도, loading 된 약물의 양이 증가될수록 PEG 400의 용량비율, 방출 매개체의 온도, loading 된 약물의 양이 증가될수록 EE의 방출속도와 부과속도는 증가하였다. 또한 투과속도는 막두께의 역수와 직선상의 상관 관계를 보였다. 그리고 EVA matrix로부터 EE가 방출되는 양상은 diffusion-controlled model을 따랐으며 이때 단위면적당 방출된 총량은 T에 비례되었다. 절개한 mouse skin을 통한 EE의 permeation은 PEG 400의 첨가에 의해 상승되었다. 이와 같이 EVA 막이 EE의 부과 및 방출을 조절하는 것으로 보아 경피 흡수를 위해 사용될 수 있다고 사료된다.
Proceedings of the Korean Society of Applied Pharmacology
/
1993.04a
/
pp.102-102
/
1993
제1차년도 연구에서 Goto등의 방법을 응용하여 생체에 대하여 안전하고 transit 양상에 대해 재현성이 확보되는 경구용 방출조절성 마이크로캅셀을 개발 하였다. 즉 methacrylate polymer(Eudragit RS, RL, E, S 및 L)의 특성을 이용하여 B-락탑계 항생물질(amoxicillin 및 cephaiexin)을 함유하는 마이크로캅셀을 제조하는 방법을 개발하였다. 본 연구에 있어서는 제1차년도에 in vitro 실험결과 유용한 서방성 제제로 판단되는 cephalexin 함유 Eudragit RS/RL, S/L 및 RS/PEG 마이크로캅셀을 제조하여 가토에 경구투여 후 생체이용률을 평가하였다. 또한 소화관에서 약물의 방출속도 및 흡수속도등을 고려한 모델을 구축하여 약물속도론적으로 해석함으로써 실제 임상에 적용할 수 있는 유용한 경구투여용 마이크로캅셀을 개발하고자 하였다. 1. in vitro 실험 입도분포, 함량시험, 용출시험 2. in vivo 실험 1) AUC에 의한 평가 2) Vallver 등의 방법에 의한 평가 3) 약물속도론적 방법에 의한 평가 결론: 1. Eudragit 의 특성을 이용하여 유중건조법으로 40% cephalexin 함유 Eudragit RL/RS, S/L 및 RS/PEG 마이크로캅셀을 제조할 수 있었고 각 조성비를 변화시킴으로써 약물방출을 조절할 수 있었다. 2. 약물속도론적 해석결과 마이크로캅셀제제의 Ka는 변화하지않고 Kr이 감소되는 즉, 약물흡수의 율속단계가 방출단계임을 보여주었다. 3. Eudragit RL/RS 마이크로캅셀은 제어방출 효율 및 흡수속도 효율이 우수한 서방성 제형으로 평가되었다.
Proceedings of the Korea Water Resources Association Conference
/
2007.05a
/
pp.1164-1168
/
2007
질소 및 인 동시제거 공정 중 대표적인 연속회분식반응조(Sequencing Batch reactor: SBR)는 비교적 간편한 운전방법과 저렴한 건설비, 유입수의 부하변동에 큰 영향을 받지 않는 소규모 하수처리에 적합한 공정으로 알려져 있다. 또한 SBR 공정은 기존 활성슬러지 공법에 비해 적은 부지로 많은 양의 폐수를 처리할 수 있고 유입수 수질 및 유량변동에 따라 다양한 운전주기를 변화할 수 있으며, 유기물 제거뿐만 아니라 반응조의 변형에 의해 영양염류의 제거가 가능한 장점이 있다. 본 연구에서는 bench scale SBR 실험을 통하여 질산염의 탈질속도 및 용해성 인의 흡수와 방출속도를 측정하고, SBR 공정의 무산소조건에서 인흡수 및 탈질을 동시에 수행하는 DPB 존재의 가능성을 파악하고자 하였다. 연구결과 무산소조건에서 S-P의 방출과 흡수가 동시에 진행되었으며, 무산소조건에서 S-P의 방출속도는 $0.08{\sim}0.94\;kgS-P/kgMLSS{\cdot}d$, 흡수속도는 $0.012{\sim}0.1\;kgS-P/kgMLSS{\cdot}d$를 나타내었다. 무산소조에서 S-P의 방출 및 흡수가 진행되는 동안 탈질과정도 함께 진행되었으며, 각각의 F/M비에서 탈질속도를 측정한 결과 F/M비 $0.44\;kgCOD/kgMLSS{\cdot}d$에서는 최대 $0.16\;kgNO_3^-N/kgMLSS{\cdot}d$의 탈질속도를 나타내었다. S-P이 방출되지 않는 경우와 방출되는 경우의 비탈질속도를 비교한 결과 S-P이 방출되지 않는 경우의 비탈질속도가 S-P이 방출되는 경우의 비탈질속도보다 높았다. 이렇게 S-P이 방출되는 경우의 비탈질속도가 더 낮은 이유는 무산소 조건에서 탈질과 S-P의 방출 및 흡수가 동시에 일어나는 경우 S-P의 방출에 관여하는 미생물과 탈질에 관여하는 미생물간의 경쟁반응 때문으로 판단된다.응답법의 적용이 가능함을 보였고, 이는 보다 복잡한 관망에서의 천이류 해석이 가능함을 시사한다.$경상도지리지$\lrcorner$(慶尙道地理志)에는 상주가 8곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기 중엽 경제적 태평과 함께 백자의 수요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동기(銅器)의 대체품으로 자기를 만들어 충당해야할 강제성 당위성 상실로 인한 자기수요 감소를 초래하였을 것으로 사료된다. 셋째, 경기도 광주에서 백자관요가 운영되었으므로 지방인 상주지역에도 더 이상 백자를 조달받을 필요가 없이, 일반 지방관아와 서민들의 일상용기 생산으로 전락하여 소규모화 되었을 것이라고 사료된다.장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어 산화물질 해독에 관여하는 다른 유전자
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.33
no.12
/
pp.39-47
/
2005
An acoustic emission technique is applied to the tensile tests of the plastic specimen under the different test speeds and the structural integrity evaluation of the plastic shell structure. Several AE characteristics are acquired from the tensile tests and they are proven to be useful parameters in evaluating its structural integrity. The results shows that tensile strength has almost constant value over some higher speed region while revealing some increasing tendency in strength as the test speeds up in lower speed region. The crack initiation loads and locations are accurately evaluated during the static compression testing of the plastic shell structures by using acoustic emission technique.
Proceedings of the Korean Fiber Society Conference
/
1998.04a
/
pp.197-202
/
1998
연속 섬유공정은 섬유물이 이동하는 가운데 연속적으로 기계적인 처리 또는 물리/화학적 가공이 행하여진다. 따라서 원료의 공급속도 (feeding speed)와 생산되는 제품의 방출속도(delivery speed)사이에 정확한 속도비를 유지하는 것은 공정처리를 받고 있는 섬유물에 가해지는 부하를 일정하게 하므로써 제품의 물리적, 화학적 성질을 균일하게 하여 품질유지에 큰 영향을 미치게 된다.(중략)
Implantable biodegradable wafers were prepared with pamidronate -loaded poly (L-lactide-co-glycolide) (PLGA, 75 : 25 mole ratio by lactide to glycolide, molecular weight : 20000 and 90000 g/mole) by direct compression method for the sustained release of pamidronate to investigate the possibility for the treatment of bone resorption. Pamidronate-loaded PLGA powders were prepared by means of physical mixing and spray drying with the control of formulation factors and characterized by scanning electron microscope and X-ray diffractometer. The pamidronate-loaded PLGA powders fabricated into wafers by direct compression under the constant pressure and time at room temperature. These wafers were also observed for their structural characteristic, release pattern, and degradation pattern. The release rate of pamidronate increased with increasing their initial loading ratio as well as increasing wafer thickness. The molecular weight of PLGA affects the release pattern : the higher molecular weight of PLGA, the faster release rate. It can be explained that the higher viscosity of high molecular PLGA solution at same concentration tends to aggregate PLGA and pamidronate resulting in unstable pharmaceutical dosage form. This system had advantages in terms of simplicity in design and obviousness of drug release rate and nay be useful as an implantable dosage form for the treatment of aural cholesteatoma.
Journal of Korean Society of Environmental Engineers
/
v.32
no.10
/
pp.973-978
/
2010
The emission of volatile organic compounds (VOCs) from building materials is one of great concerns due to maintain airtight condition of a building to reduce energy consumption, and it causes the deterioration of indoor air quality. Therefore, the emission characterization of VOCs from building materials is necessary to improve indoor air quality. Emission characteristics of VOCs from a plywood flooring that is one of the most commonly used materials in an under-heating system, and from an adhesive that is generally used to stick a plywood flooring to a concrete floor were investigated using an emission chamber test in this study. It was found that the VOCs emission factor was dependent upon and proportional to indoor temperature, and the emission characteristics were closely related to the existing places and conditions of VOCs sources inside the building materials. Maximum emission factors of hexane and toluene from building materials were generally observed at the beginning, however, only that of toluene from a plywood flooring was shown after 6 hours from the beginning. It could be considered that the existing place and condition of toluene source inside a plywood flooring could influence on the VOCs emission. From this study, bake-out time more than 72 hours could be recommended before moving in to avoid the exposure to high concentration of VOCs emitted from an under-heating system.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.132-132
/
2012
압력 $10^{-9}$ Torr 이하의 초고진공(ultrahigh vacuum) 영역에서의 압력 측정에는 수 mA의 열전자로 잔류 가스를 이온화시켜 그 이온 전류를 측정하는 이온게이지를 주로 사용한다. 압력이 $10^{-12}$ Torr영역 이하인 극고진공(extreme high vacuum: XHV) 영역에 진입하면, ESD (electron stimulated desorption) 효과 등에 의한 이온 게이지 자체의 가스방출률이 커져 정확한 압력 측정이 곤란해 진다. 극고진공 영역에서 이온 게이지는 수 와트(W) 이상의 전력을 사용하여 수 mA의 열전자를 방출시키나, 신호인 이온 전류의 양은 1pA 이하이기 때문에 열전자에 의해 발생되는 백그라운드 전류에 묻혀 신호 전류가 측정되지 않는다고 할 수 있다. 100 nm 이하의 곡률을 가진 뾰족한 금속 탐침에 강한 전기장을 걸어주면 고체 내부의 전자가 터널링 효과에 의해 진공 중으로 방출되며, 이를 전계방출(Field Electron Emission) 효과라 부른다. 전계 방출 전류량은 탐침 표면의 일함수에 의존하며, 일함수가 클수록 지수함수 적으로 감소한다. 금속 표면에 진공 중의 잔류 가스가 부착하면 일함수가 증가한다. 가열에 의해 전계방출 탐침의 표면을 세정한 후에 전자 빔을 방출 시키면, 표면에 가스 분자가 흡착하여 방출 전류량은 점점 감소한다. 감소 속도는 압력에 비례하며, W(310) 탐침의 경우 $10^{-10}$ Torr 영역에서는 수분만에 최초 전류값의 1% 이하로 감소한다. 전계방출 전류의 감소속도가 압력에 비례하는 현상을 이용하여 압력을 측정하였다. Extractor Ionization Gauge 측정값 $5{\times}10^{-12}-3{\times}10^{-10}$ Torr의 범위에서 (111) 방향으로 정렬된 텅스텐 단결정 탐침을 사용하여 방출전류의 로그값을 시간의 함수로 semilog그래프를 그리면, 그래프는 직선을 그리며 그 기울기가 압력에 비례함을 알 수 있었다. 기울기 값과 게이지 측정값은 $10^{-11}{\sim}10^{-10}$ Torr 영역에서 거의 완벽한 비례관계를 보여주었으나, $10^{-12}$ Torr 영역에서 게이지 측정값은 기울기 값에서 추출한 압력치보다 높은 값을 보여주었으며, 이는 게이지 백그라운드 전류에 의한 차이라고 생각된다. W (310) 탐침의 방출전류는 그 감소속도가 W (111) 탐침과 마찬가지로 압력에 비례하였으나, 전류-시간 그래프는 가열 세정 직후에 전류가 거의 감소하지 않는 $2{\times}10^{-10}$ Torr에서 약 10분간 지속되는 '안정 영역'이 존재함을 보여주었다. '안정 영역'은 $10^{-11}$ Torr 영역에서는 수십분, $10^{-12}$ Torr 영역에서는 수시간 이상으로 증가하였다. 초-극고진공 영역에서의 잔류가스 주성분인 수소에서 물, 일산화탄소등의 가스로 바뀌면 '안정 영역'은 사라졌고, 이는 '안정 영역'이 수소 흡착에 의해서만 나타나는 고유 현상임을 말해준다.
Bok Young-Bin;Lee Doug-Youn;Lee Chang-Young;Kim Kyung-Nam;Kum Kee-Yeon
Restorative Dentistry and Endodontics
/
v.29
no.6
/
pp.548-552
/
2004
Intracanal disinfection of infected root canal is one of important treatment procedure. This in vitro study aimed to evaluate whether the surface polymers of controlled release drug (CRD) can effectively control the release rate of chlorhexidine for root canal disinfection. Four CRD prototypes were prepared: Group A (n=12); The core device (absorbent paper point) was loaded with 40% CHX solution as control. Group B (n=12); same as group A, but the device was coated with chitosan. Group C (n=12); same as group A and then coated three times with 5% PMMA. Group D (n=12); same as group A and then coated three times with 3% PLGA. All CRD prototypes were soaked in 3 mL distilled water for experimental periods and the concentrations of released CHX from each CRD prototype were determined using a UV spectrophotometer. Results showed that release rate of CHX were the greatest in the non-coated group (control group), followed by the chitosan-coated group, the PLGA-coated group, and the PMMA-coated group (P < 0.05). This data indicate that surface polymers can control the release rate of CHX from the CRD prototypes.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.