• Magazine of the Korea Concrete Institute
• /
• v.27 no.1
• /
• pp.41-44
• /
• 2015

• 수도
• /
• v.25 no.1 s.88
• /
• pp.55-59
• /
• 1998

• KSBB Journal
• /
• v.10 no.1
• /
• pp.71-77
• /
• 1995

Characteristics of S-acid and its derivatives, as biosurfactants, were investigated. Sodium salt of S-acid(S-lNa) effectively decreased the surface tension to near 30 dyne/cm and showed superior dispersing ability than commercial surfactants such as SDS and Tween 80. The emulsion made by S-lNa could be maintained even with increased concentration of calcium ion. Also the penetratlng ability of S-lNa was observed as effective as that of LAS. All derivatives of S-acid were degraded by microorganisms much faster than conventional surfactants. Among the derivatives, S-3Na prevented rust formation as effectively as commercial anti-rust agents did.

• Clean Technology
• /
• v.17 no.4
• /
• pp.314-324
• /
• 2011

Several amide derivatives have been used as additives for base oil of metal working fluids and pressure working oils. In this paper, a series of succinic acid alkyl half-amide derivatives were synthesized as over 97% yields by ring-opening reaction of succinic anhydride and several amines and were soluble in 100 N base oil within 1 wt% concentration. The structures of the synthesized amides were confirmed by $^1H$-NMR, FT-IR spectrum and GC analysis. Anti-corrosion properties of the amides in sea water were evaluated through ASTM D665 method and weight loss method. As the results of anti-corrosion properties, the properties of the amides with shorter alkyl chain and high concentration showed better performance than those with longer alkyl chain and low concentration. Also, the dialkyl amides showed better anti-corrosion properties than those of the monoalkyl amides. Inhibition efficiency% (IE%) was over 93% in the concentration of 40 ppm and corrosion rate (CR) was below 0.5 mm/year in the same concentration.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.367-375
• /
• 2011

Succinic acid ester derivatives have been used as additives for the base oil of metal working fluids and pressure working oils. In this paper, a series of succinic acid alkyl half-esters were synthesized with over 97% yields by ring-opening reaction of succinic anhydride and fatty alcohol and were soluble in 100 N base oil within 1 wt% concentration. The structures and purities of ester derivatives were confirmed by $^1H-NMR$ and FT-IR spectrum and GC analysis. Anti-corrosion properties of the esters in sea water were evaluated through ASTM D665 method and weight loss method and compared to that of succinic alkyl esters without carboxylic acid group in the molecule. As the results, anti-corrosion properties of succinic acid alkyl half-esters with carboxylic acid group were better than those of succinic acid alkyl esters without carboxylic acid group. And, Anti-corrosion properties of the esters with a shorter alkyl chain of high concentration showed better performance than those with longer alkyl chain of low concentration. Inhibition efficiency % (IE%) of the esters was over 95% in the concentration of 80 ppm and corrosion rate (CR) was below 0.3 mm/year at the same concentration. Thus, the corrosion properties of succinic acid alkyl half-esters result from the carboxylic acid groups in molecules.

• 한국문화재보존과학회:학술대회논문집
• /
• 2007.10a
• /
• pp.95-98
• /
• 2007

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.229-232
• /
• 1998

Recently it has become general to use the inhibitor with a view to protecting corrosion of rebars in concrete. As the inhibitors used in construction works are almost made in America or Japan, we immediately need to begin home production of inhibitors. In this paper, to estimate the domestic anodic inhibitor of nitrite in comparison with foreign made inhibitor we made some fundamental experiments of setting time, slump and compressive strength. Besides, we analysed the effect of corrosion protection of inhibitor on the ground of corrosion current, resistance to chloride penetration and diffusion of chloride ingress in concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.359-364
• /
• 2001

The purpose of this study is to develop the repair system for RC members with damaged by rebar corrosion using new corrosion inhibitor which was high nitrite content. In the experiments, the acceleration corrosion test of rebar was conducted using the specimen which was applied by various repair system. As a result, it was confirmed that the new repair system without concrete patching had high anti-corrosion property compared with other repair systems and was very effective as a spray type corrosion inhibitor in concrete containing chloride (0.1% of NaCl).

• The monthly packaging world
• /
• s.262
• /
• pp.94-104
• /
• 2015

환경부는 '화학물질의 등록 및 평가 등에 관한 법률(화평법)'과 '화학물질관리법(화관법)' 시행규칙을 공포하고 지난 달부터 시행했다. 환경부에 따르면 두 법안은 화학물질의 체계적인 관리로 사전에 안전사고를 예방하고 국민건강과 환경을 보호하기 위해 제정됐다. 화학물질의 생산 유통 등 모든 과정의 안전관리를 강화하는 것이 골자다. 우선 화평법 시행에 따라 모든 신규 화학물질과 연간 1톤 이상 제조 수입되는 기존 화학물질에 대한 등록이 의무화되고 등록 신청 기준도 강화된다. 다만 제조 수입량이 연간 1톤 미만일 경우 등록 신청 제출 자료를 정식 등록 9개보다 적은 4개로 간소화하고 등록기간도 30일에서 3~7일로 줄였다. 또 유해물질 함유제품으로 인한 피해를 예방하기 위해 생활화학 제품 15종을 우려제품으로 지정해 안전 표시기준을 준수하도록 했다. 관리대상 품목은 세정제 합성세제 표백제 섬유유연제 코팅제 접착제 방향제 탈취제 방청제(금속부식 방지제) 김서림방지제 물체염탈색체 문신용염료 소독제 방충제 방부제 등이다. 화관법에서는 유해 화학물질 취급 때 공통 적용되는 46개 준수사항을 규정하고 물질별로 구체적인 취급기준을 고시하도록 했다. 취급시설의 설치 관리기준도 시설 종류별로 구체화했다. 새로 도입되는 장외 영향평가는 취급시설 설치자가 화학사고 발생 시 사업장 주변지역 사람이나 환경에 미치는 영향을 사전에 평가해 시설을 안전하게 설계 설치하도록 규정했다. 과징금과 행정처분 기준도 구체화했다. 행정처분은 2년 내 위반 횟수에 따라 경고 개선명령 영업정지 허가취소로 차등화하고 사고가 일어나면 사상자와 사업장 밖 피해액을 기준에 따라 산정해야 한다. 본 고에서는 두 법률의 주요 내용과 함께 주요 문의 사항을 살펴봄으로써 이해를 도우고자 했다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.104-105
• /
• 2014

In this study, fundamental properties of mortar with the variation of dosage of anti-rust agent has been tested to evaluate the effect of the anti-rust agent. Dosage of anti-rust agent was fixed as 0,3,6,9%, respectively. The variation of the flow, compressive strength and diffusion speed of chloride ion has been tested to evaluate the effect of the anti-rust agent. Results showed that flow has been smally increased. For the compressive strength, compressive strength increased with the increase of dosage of agent. For the diffusion speed of chloride, the speed decreased with the increase of dosage of the anti-rust agent. For the overall consideration, it could be identified that when the dosage of anti-rust agent was fixed as 3-6%, the mortar showed the optimum performances.