• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.94-98
• /
• 2012

연구소로 사용될 FRF 및 Dynamic Stiffness에 대한 평가를 진행하였다. 동강성을 평가하여 정밀설비의 사용 가능여부를 파악하고 Slab의 위치에 따른 진동응답함수를 평가하여 정밀설비에 대한 설치위치의 참고자료로 활용하고자 한다. 또한, 추후 진동원 설비에 대한 방진대책 선정 자료로 사용하고자 한다.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.145-151
• /
• 2019

In this study, the effects were analyzed by applying the vibration absorption liner into the guide rail bracket as a part of method to reduce the vibration and noise on the high-rise apartment. As the result of vibration absorption liner performance, it was checked that the level of vibration and noise was reduced around 65.49% in the car side and around 90.05% in the counterweight side. Therefore, the vibration absorption effect by the vibration absorption liner of elevator guide rail bracket became fairly good. In case of the vibration absorption liner application, there was an effect on the reduction of 7.26 to 22.22% at hoistway section area, 3,840,000 to 9,780000 KRW at the cost of material and installation by comparing with the damping beam application. Also, in case of the vibration absorption liner application with light weight instead of damping beam with heavy weight, it was thought to become significant effect at preventing the safety from the accidents on installation site.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.374-374
• /
• 2011

Recently the construction of railway sections passing the central area of cities and stations under railway lines are increasing, and then it is urgently required to take the countermeasures against the railway vibration and the second-phase noise radiated from it. The most efficient countermeasure, out of technologies developed up to now, is the floating slab track which is the track system isolated from the sub-structure by springs. In other countries, the source technologies for anti-vibration design and vibration isolator - one of key components - have been developed and many installation experiences have been accumulated. However, in Korea, since the system design technology and technologies for key components are not yet developed, the foreign system are being introduced without any adjustment, and the key component, vibration isolator, depends on imports. In this study, based on the results of previous studies of the dust-control device installation using the slab and go through time after lifting impressive when stepped on power generated by the cross-section of the slab and shear connection re-examined the structural stability.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.11-16
• /
• 2011

When the trains are passed the station, a serious force is applied to ground and the caused vibration is propagated to the area of the station by the ground and rocks. The caused vibration brings about the operation interruption of the equipment which is sensitive to the vibration, or will bring about the structural damage of the station. In this study, to investigate the vibrational evaluation of railway station by the train service, the vibration simulation was performed and analyzed the effect of the vibration isolating countermeasure. From the vibration measurement, all trains that passed through the station exceeded the vibration criteria. Therefore, the vibration isolating countermeasure was established and the vibration simulation was performed.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.107-119
• /
• 1990

에너지 절약을 목적으로 한 최근 신조선의 경우, 구조는 경량화되어 가는 반면 기진력은 증가되고 있다. 즉 주기관은 소수 대구경 기통을 가진 고효율 디젤 엔진이 채용되고 있어 진동 유발요인은 증가되고 있다. 따라서 설계초기부터 진동제어 목표를 세우고 설계 단계마다 진동을 예측 진단하고, 이의 대책을 세우는 방진 시스템이 요구된다. 본문에서는 이러한 시스템 개발의 일환으로 최근 현대중공업에서 건조한 선박 진동 수준 및 진동 요인 변천을 검토하고 추후 개정

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.185-190
• /
• 1993

최근 서울에서는 날로 심각해지는 교통난 해소대책으로 현재 운행중인 1-4 호선 외에 5-8호선의 공사가 한창 진행중이다. 이러한 지하철 통과 인접지역 에서는 지하철 운행 진동으로 인하여 상부나 인접 건물에 진동 영향이 우려 되는 경우가 많으며 이에 대한 대책으로 지하철 궤도부를 방진하거나 상부 의 건물을 지하철 구조체로부터 진동 절연하는 방법이 검토되고 있다. 이러 한 대책 수립시에는 대책후의 진동예측이 필요하며 지하철의 진동특성 입력 데이타 확보가 필수적이다. 본 연구에서는 이러한 필요성에 따라 서울의 2호 선 강남역과 교대역, 3호선 교대역 궤도부 주변 바닥과 벽체, 플랫폼, 표파는 층의 바닥에서 지하철 통과시의 전후, 좌우, 상하방향의 진동을 측정 분석하 여 추후 지하철 진동저감대책 수립에 기초자료로 제시하고자 한다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1991.10a
• /
• pp.20-21
• /
• 1991

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.135-144
• /
• 1994

The coupled vibration of the deck house and stern structure, which was experienced on a 12,900 TDW Ro/Ro ship, has been studied. It was a large-scale vibration problem where the structure resonates with the propeller excitation at the first blade passing frequency. After discussing the structural characteristics of the ship, the vibration characteristics measured ducting the sea-trial are presented and compared with the analysis results which are based on a 3 dimensional finite element(FE) model. The FE model is also used to verify various reinforcement options and to predict their effectiveness. A substantial reduction or the vibration was confirmed during the sea-trial after installing a few selected reinforcement. The forced vibration response, which is computed using the FE model, is compared with the measured data. The change of the vibration characteristics according to loading conditions is also studied.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.45-54
• /
• 2015

In the case of railway facilities in cities such as a railway station or a bridge, the significance of design for reducing vibration and noise is getting more significant. The vibration control solution is in need especially for an elevated railway station to block vibration of a train and secondary noise effectively. Even though a vertical vibration isolation device is able to be applied effectively to railway facilities such as elevated railway stations which transfer vibration directly from a train to a structure, the development of the vertical device is much slower than a horizontal vibration isolation device. In this paper, a vibration isolation device using wedge type friction material which is currently developing to reduce train-induced vibration effectively is introduced and test results for verification of dynamic performance is also presented. The vibration test on a concrete structure equipped with the developed vibration isolation device is conducted through which the isolation performance and dynamic properties are verified and needs for improving the performance of the device is identified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.555-558
• /
• 2013

A type of electric propulsion employed by specialized purpose vessels or offshore is the azimuth thruster. Azimuth thruster application had been increasing recently and resulted to excellent vessel maneuverability. However, this system is very complex and some of its major component being exposed under the seawater level presents difficulty in sealing design. For Polar class icebreaker operating in extreme sea condition, this requires a high level of reliability and safety. In this study, the characteristics of lubricating orifice pipe structural vibration installed at the lower reduction gear were investigated and analyzed through beam analysis theory and comparison of experiments. Propeller excitation and the resonant modes of vibration causing excessive vibration and suitable countermeasures to prevent damage due to vibration fatigue on the pipe are presented.