• The Magazine of the IEIE
• /
• v.25 no.5
• /
• pp.71-78
• /
• 1998

디지털 TV 방송을 수신하기 위한 디지털 TV 수신기의 핵심 부품을 5개의 IC로 개발하였다. 5개의 칩 세트는 VSB로 변조된 신호를 수신하기 위한 2개의 채널 디코더 IC와 3개의 비디오 신호처리 IC로 구성되어 있다. VSB 수신용 IC는 Syne 및 Timing 복구와 채널 등화 기능을 수행하는 SyncEq와 전송시의 오류를 정정하는 VSB 채널 디코더로 구성되며, 비디오 신호 처리부는 MPEG2 다중화 방식의 Transport Stream을 디코딩하기 위한 역다중화용 IC와 MPEG2 비디오 압축/신장 규격의 MP@HL의 비트스트림을 디코딩하기 위한 비디오 디코더 및 18가지 비디오 포맷을 단일한 출력 포멧으로 변환하여 주며 OSD 등 디스플레이 기능을 위한 비디오 디스플레이 처리용 IC로 구성되어 있다. 이 칩 세트는 VHDL로 설계되었으며 RTL 시뮬레이션과 하드웨어 Emulator로 시스템 레벨에서 검증되었고 0.6u, TLM, CMOS 공정을 이용하여 제작되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.622-628
• /
• 1996

This paper describes a new serial interface system which uses conventional 75 ohm coaxial cable. Typically parallel 25 pin cable and connectors are used to transfer and receive the data between digital systems such as HDVCR, D3 VTR and HDTV Receiver. The coaxial cable is more desirable for consumer product applications and also for studio applications where long signal paths and switching are required. This serial data transfer technique is thoroughly tested and utilied in the data transmission/reception between systems more than 200 feet apart. It is also cost effective because it does not require RF PLL, SCRAMBLING, and NRZI hardware.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1814-1819
• /
• 1996

This paper describes a dnw serial interface system which uses comma free code. Typically parallel 25 pin cable and connectors are used to transfer and receive the data between digital systems such as HDVCR, D3VTR and HDTV Receiver.The coaxial cable is more desirable for consumer product applications and also for studio applications where long signal paths and switching are requeired. This serial data trasfer technique is possible the error detection and the self synchronization, also easy edge insertion for PLL control. It is also cost effective because is does not requeire RF PLL, scrambling, and NRZI hardware.

• Electronics and Telecommunications Trends
• /
• v.17 no.4 s.76
• /
• pp.101-112
• /
• 2002

RF 부품의 설계는 이용분야에 따라 그 설계법 및 제조공정이 달라지게 된다. 상업적인 이용분야에서는 대량생산 및 저가격화를 목적으로 하는데 반해, 통신위성 및 군사분야 등에서는 고신뢰도 및 고성능을 요구하게 된다. 그동안 국내의 RF 기술은 기본적으로 이동통신 및 위성방송수신기 등의 상업적인 분야에 치중되어 왔기 때문에 높은 신뢰도를 요구하는 위성중계기용 RF 설계기술의 기술수준은 선진국에 비해 매우 낮은 수준이다. 2005년도에는 국내에서 독자적으로 개발되고 있는 중계기를 탑재하는 통신위성이 발사될 예정이므로, 현 시점에서 높은 신뢰도를 갖는 위성중계기용 RF 부품의 설계법 및 제조공정 등을 살펴보는 것이 필요하리라 판단된다. 따라서 본 고에서는 높은 신뢰도를 갖는 위성중계기용 RF 부품의 설계 및 제조공정에 대하여 고찰한다.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1301-1303
• /
• 1996

A new automatic frequency control(AFC) tracking algorithm, which we call a rotational decision directed AFC(RDDAFC) is proposed for QPSK demodulation at the digital direct broadcasting satellite(DBS). In order to prevent the presence of the residual phase difference between symbols received at k and k-l by the CPAFC[1] as well as the AFC based on $tan^{-1}$ circuit[2], the RDDAFC rotates the decision boundary for the kth received symbol by the frequency detector output of the (k-1)th received symbol before passing through the cross product discriminator. Test results show that the total pull-in time of the RDDAFC and PLL was 0.13msec under a carrier frequency offset of 2.4MHz when S/N equals 2dB.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.296-301
• /
• 2021

This study is a study dealing with the empirical test of standardized multimedia disaster warning broadcasting linked with the next-generation prediction and warning platform and the disaster warning additional data service of terrestrial UHD broadcasting. The next-generation prediction and warning platform used in the demonstration test complies with the CAP-based TTA standardization standard, and the UHD disaster warning additional data service complies with the AEAT standard. As a result of the experiment, when a standardized CAP disaster warning message is issued and delivered to a broadcasting company, a system was established so that it is automatically converted to AEAT, a UHD disaster warning additional data message, and transmitted. The receiver unit was configured by connecting a set-top capable of receiving disaster alert data and a TV with an HDMI cable. When a disaster is announced, the set-top displays the AEAT message on the TV broadcasting screen, customized to the priority of the disaster and the area where it is issued. In addition, incoming messages are displayed in a language suitable for user settings among 5 languages. Additional multimedia functions such as images and alarm sounds could also be linked. In particular, it was confirmed that the receiver message was displayed within 3 seconds of issuing the disaster alert, enabling prompt delivery of the disaster alert.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.38-46
• /
• 2011

In this paper, we propose a calculation methodology of the service distance to assure the satisfactory quality of service for analogue and digital TV receivers. Using the field strength formulation for TV receiver based upon Rec. ITU-R P.1546, computational results are presented and discussed for both systems, and some important factors are reviewed in terms of the equivalent level of service, which must be kept due to ATV to DTV conversion. The presented method provides the predicted values of field strength at receiver areas to check whether transmission quality can be satisfied or not, and it can be also used for obtaining the protection ratio or separated distance from co-channel or adjacent interference signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.851-860
• /
• 2013

To overcome a scarcity of radio resources to mobile broadband service, the usage of TV white space gains much attraction around the world. This paper carries out an interference analysis either by performing realistic experiments or by executing statistical Monte-Carlo simulation to exploit interference probability. The results obtained from experiments are compared to those from simulations in order to clarify the coexistence of utilization of TV band devices (TVBD) in indoor circumstances. Along the execution of our experiment in the presence of DTV receiver, we apply to a variety of transmission parameters proposed in FCC for TVBD. According to experimental and simulation works, the allowable transmission powers of TVBD systems are exploited for the plausible which are coexist on the first as well as the second adjacent frequency bands. Throughout results, it can conclude that TVBD systems can be coexisted via achieving proper transmission powers depending on the locations of themselves without showing harmful interference to DTV reception.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.3
• /
• pp.53-65
• /
• 2010

Conditional Access System (CAS) is a core security mechanism of IPTV SCP (Service and Content Protection) which enables only authenticated user to be able to watch the broadcasting contents. In the past, it was general that CAS was built in Set-Top Box (STB) as hardware or as a detachable cable card. However, numerous researches in Downloadable CAS (DCAS), where users can download CAS code in their STB through their network, have been recently conducted widely due to the lack of security and scalability problem. In this paper, the security requirements of OpenCable based DCAS which is typical example of downloadable IPTV SCP will be derived, the novel authentication and key management scheme will be proposed by using the Authentication Proxy (AP) which is the core DCAS. Also, the benefits of the proposed system will be evaluated by comparison and analysis with preceding research.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.152-164
• /
• 2012

DMB provides various kinds of data services such as BWS and TPEG service in addition to audio and video services. But recently the necessity of new business models creating profit has been on the rise due to the saturation of DMB receiver market and break-down of market barrier between mobile IPTV and DMB services. This paper introduces DMB filecasting service technology, which can be expected a new profit-creative business model. The purpose of DMB filecasting service is to transmit non-real time multimedia contents based on DMB AF format to the users through DMB channels. It makes possible to consume DMB contents with any DMB-installed device anytime, anywhere and share them with others. Also DMB filecasting service makes consumption and request of DMB contents possible to be extented to a variety of networks as well as DMB channels. The paper explains the standardization status of DMB filecasting service and various DMB filecasting service scenarios. And also it proposes a signalling methode, a transmission and reception protocol and a receiver structure using DMB broadcasting program guide information.