• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.501-511
• /
• 2017

Natural radionuclides such as uranium and radon from 170 groundwater wells in Jeonnam Province were investigated, together with hydrogeochemical properties, and concentration maps of uranium and radon were also constructed in this study. Characteristics of their concentrations and occurrence were discussed using hydrogeochemical factors and geostatistical methods based on individual geological units. Though uranium and radon in groundwater show a wide range in the concentration, most of which occur as low levels except a few sites. Based on factor analysis, correlation coefficients between uranium and radon are very low. Such results verify that these radionuclides behave independently, well consistent with most previous results investigated nationwide in groundwater. Besides uranium and radon, most hydrochemical components in groundwater show a close relation to indicate the water-rock interaction taken place actively in aquifer.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.53-59
• /
• 2005

Rb-Sr isotopic ages of oxidized biotite in the weathering profile of granodiorite, Yecheon area, were measured by thermal ionization mass spectrometry, and compared with their K-Ar ages. A decrease of Rb-Sr isotopic age is well correlated with iron oxidation, and consistent with K-Ar age. Octahedral and interlayer cations including Rb and Sr were partly released from the oxidizing biotite by excess positive charge from iron oxidation. Divalent /sup 87/Sr decayed from monovalent /sup 87/Rb was more easily released from biotite, resulting in the reduction of Rb-Sr isotopic age. Weathered biotite is not suitable for the age dating of parent rocks, but behaviour of radiogenic isotopes provides useful information on the geochemical and structural changes of biotite during weathering.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.267-273
• /
• 2006

We have prepared PP/Ba-ferrite composite fabrics by a melt-blown spinning method and investigated the relationship between the properties of PP/Ba-ferrite composite fabrics and melt-blown processing factors. A PP composite containing Ba-ferrite as a magnetic particulate filler was prepared in the form of pellet from PP resin and Ba-ferrite powder by melt compounding using a single extruder. Screw turning force (rpm), DCD (die-to-collector distance), and Ba-ferrite content were changed. We measured diameters of fiber, mechanical, thermal, and magnetic properties for the composited PP fabrics. The elongation was increased and a fiber diameter and tensile strength were decreased as the spinning distance increased or screw turning force decreased. The crystallinity was increased with increasing spinning distance according to XRD. It was assumed that the orientation of crystalline domain in the neat PP without ferrite was increased by drawing in mechanical direction, however, the orientation in the PP composite was decreased according to XRD analysis. We measured a magnetic property of PP nonwoven fabric containing Ba-ferrite powder. A coercive force, maximum magnetization, and residual magnetization are reduced with the spinning distance. According to the result of TGA measurement, the heat resistance was increased with the Ba-ferrite powder content and with decreasing the spinning distance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.6
• /
• pp.43-50
• /
• 2010

In this paper, we analyzed radiated emission generated by the split power/ground plane structures in order to reduce EMI in system modules. The magnetic fields and electric fields were simulated and measured on the test boards under various conditions. In order to reduce radiated emission, we have to determine spacing and location of the split ground gap so that input signal frequency does not coincide with the resonance frequency of the split power/ground plane structure and the phase of reflection coefficient is close to $0^{\circ}$ at input signal frequency. Moreover, we found that inserting a stitching capacitor could reduce the radiated emission. Low magnitude of reflection coefficient and the phase close to $0^{\circ}$ are required to reduce radiated emission. It is necessary to properly decide value and location of a stitching capacitor to fulfil those requirements.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.67-81
• /
• 2000

An accurate and efficient numerical method for two-dimensional nonlinear radiation problem has been developed. The wave motion due to a moving body is described by the assumption of ideal fluid flow, and the governing Laplace equation can be effectively solved by the higher-order boundary element method with the help of the GMRES (Generalized Minimal RESidual) algorithm. The intersection or corner problem is resolved by utilizing the so-called discontinuous elements. The implicit trapezoidal rule is used in updating solutions at new time steps by considering stability and accuracy. Traveling waves caused by the oscillating body are absorbed downstream by the damping zone technique. It is demonstrated that the present method for time marching and radiation condition works efficiently for nonlinear radiation problem. To avoid the numerical instability enhanced by the local gathering of grid points, the regriding technique is employed so that all the grids on the free surface may be distributed with an equal distance. This makes it possible to reduce time interval and improve numerical stability. Special attention is paid to the local flow around the body during time integration. The nonlinear radiation force is calculated by the "acceleration potential technique". Present results show good agreement with other numerical computations and experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.220-227
• /
• 2011

With the rapid development of mobile communication technology, the technologies based on the diverse digital modulation schemes have been used for the frequency range of over 800 MHz. The only radiation immunity has been tested using only AM signal based on IEC 61000-4-3 without any consideration of the influence of electromagnetic radiation in Korea. However, it has not been tested by wideband digital modulation signals such as cdmaone(IS-95), WCDMA and PM signal. The purpose of this study was to review the standards. In addition, the input signals were analyzed and tested considering the environments in Korea. The results showed that the devices were influenced by digital modulation signal or PM signal more than by AM signal.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.477-491
• /
• 2013

Natural radionuclides in groundwater in the Danyang area were investigated to characterize the behaviors of uranium and radon with respect to lithology and physico-chemical components, which can aid our understanding of their occurrence, properties, and origins. To this end, a total of 100 groundwater samples were collected and analyzed, and radionuclide levels were used to construct detailed concentration maps. The water type of the groundwater, assessed using a Piper diagram, is mainly Ca-Na-$HCO_3$. The concentrations of uranium range from 0.02 to $251.0{\mu}g/L$ (average, $3.85{\mu}g/L$) and only 1% exceed USEPA's MCL (Maximum Contaminant Level). Uranium is enriched in groundwaters of Cretaceous granites and Precambrian metamorphic rocks, whereas it is depleted in groundwaters of sedimentary rocks. The concentrations of radon range from 13 to 28,470 pCi/L (average, 2397 pCi/L). Only 15% of the samples exceed AMCL (Alternative Maximum Contaminant Level) of 4000 pCi/L. The radon concentration is highest in groundwater of Cretaceous granites and lowest in groundwater of sedimentary rocks. In conclusion, the distribution and occurrence of radionuclides are intimately related to the basic geological characteristics of the rocks in which the radiogenic minerals are primarily contained. The behavior of uranium is only weakly related to that of radon (correlation coefficient = 0.15). There are also weak correlations between radionuclides and the main chemical components, pH, EC, Eh, and well depth. Of note, the correlation coefficient between radon and $SiO_2$ is 0.68, and that between radon and $HCO_3$ is -0.48. Factor analysis shows that radionuclides behave somewhat independently of each other because there are no significant factors that control the behavior of chemical components as well as radionuclides. The detailed concentration maps during this study will be used to establish useful database of radionuclide distribution and geological properties throughout Korea.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.551-574
• /
• 2014

The occurrence, distribution, and hydrogeochemical characteristics of uranium and radon in groundwater within different lithologies in Gyeongnam and Gyeongbuk provinces were investigated. A total of 201 groundwater samples from sedimentary rocks taking a large portion of the geology and from igneous rocks taking a small portion of the geology were analyzed and examined using factor analysis. Their radionuclide levels were used to construct detailed concentration maps. The groundwater types, defined using a Piper diagram, are mainly Ca-$HCO_3$ with less Na-$HCO_3$. Among the samples, one site exceeds $30{\mu}g/L$ of uranium (i.e., the maximum contaminant level of the USEPA) and three sites exceed 4,000 pCi/L of radon (i.e., the alternative maximum contaminant level). No samples were found to exceed the 15 pCi/L level of gross alpha or the 5 pCi/L level of radium. The concentration of uranium ranges from 0.02 to $53.7{\mu}g/L$, with a mean of $1.56{\mu}g/L$, a median of $0.47{\mu}g/L$, and a standard deviation of $4.3{\mu}g/L$. The mean concentrations of uranium for the different geological units increase in the following order: Shindong Group, Granites, Hayang Group, Yucheon Group, and Tertiary sedimentary rocks. The concentration of radon ranges from 2 to 8,740 pCi/L, with an mean of 754 pCi/L, a median of 510 pCi/L, and a standard deviation of 907 pCi/L. The mean radon concentrations for the investigated geological units increase in the following order: Granites, Yucheon Group, Tertiary sedimentary rocks, Hayang Group and Shindong Group. According to the factor analysis for each geological unit, uranium and radon behave independently of each other with no specific correlation. However, radionuclides show close relationships with some components. Regional investigations of radionuclides throughout the country require an integrated approach that considers the main lithological units as well as administrative districts.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.1-5
• /
• 2017

In this paper, multiuser detector (MUD) based on radial basis function (RBF) is proposed and simulated for a multicode direct sequence/code division multiple access (DS/CDMA) system in a multipath fading channel. The performance of RBF-based MUD is compared with that of many suboptimal multiuser detectors in terms of bit error probability. From the simulation results, it is confirmed that the RBF-based MUD outperforms decorrelating detector, and achieves near-optimum performance under various environments. The results in this paper can be applied to design of MUD for a multicode DS/CDMA system.

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.399-406
• /
• 2013

The quality of satellite imagery should be improved and stabilized to satisfy numerous users. The radiometric characteristics of an optical sensor can be a measure of data quality. In this study, a band aggregation technique and spectral response function of hyperspectral images are used to simulate multispectral images. EO-1 Hyperion and Landsat-8 OLI images acquired with about 30 minutes difference in overpass time were exploited to evaluate radiometric coefficients of OLI. Radiance values of the OLI and the simulated OLI were compared over three subsets covered by different land types. As a result, the index of agreement shows over 0.99 for all VNIR bands although there are errors caused by space/time and sensors.