• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8B
• /
• pp.691-700
• /
• 2006

Based on the destination IP address of incoming packets, the Internet routers determine next hops and forward packets toward final destinations through If address lookup. The bandwidth of communication links increases exponentially fast as well as the routing table size grows significant as the number of single host networks attached to the Internet increases. Since packets should be processed at wire-speed, the increased link speed reduces the processing time of a packet in routers, and hence more efficient and fast IP address lookup algorithms and architectures are required in the next generation routers. Most of the previous IP lookup schemes compare routing prefixes of shorter length first with a given input IP address. Since IP address lookup needs to find the most specific route of the given input, search continues until the longest matched prefix is found while it keeps remembering the current test matching prefix. In this paper, based on binary search on prefix length, we proposed a new IP address lookup algorithm which compares longer prefixes first. The proposed scheme is consisted of multiple tries with prefixes on leaves only. The trie composed of the longest prefixes is primarily searched whether there is a match with the given input. This processing is repeated for the trio of the next longer prefixes until there finds a match. Hence the proposed algorithm provides the fast search speed. The proposed algorithm also provides the incremental update of prefixes while the previous binary search on length scheme does not provide the incremental update because of pre-processing requirement. In this paper, we performed extensive simulations and showed the performance comparisons with related works.

• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.335-340
• /
• 2012

During the manufacturing process of chestnut, 50% of biomass is produced as chestnut shell (CS) or chestnut hull (CH), a forestry by-product. Due to its high fiber content and economic benefit, there is a possibility of using chestnut hull as a supplement for a ruminant diet. Few studies, however, have been conducted on evaluating nutritive value of chestnut hull for ruminant animals. The objective of this study were thus to analyze chemical composition of CS, a by-product after the first processing of chestnut, and CH, a by-product after the second processing, and access in vitro rumen fermentation characteristics of them. For the in vitro fermentation using strained rumen fluid obtained from a fistulated Hanwoo steer, commercial total mixed ration (TMR) for dairy goat was used as a basal diet and was replaced with different proportions of chestnut shell and hull. A total number of 13 treatments were carried out in this study: 100% TMR, 100% CS, 100% CH, a mix with 50% CS and 50% of CH (MIX), TMR replaced with 5%, 10%, or 15% of CS, CH, or MIX, respectively. For each treatment, in vitro dry matter digestibility (IVDMD) and pH after 48 hours of rumen fermentation were measured. Gas production at 6, 12, 24, 48 hours of incubation was also analyzed. Compared to CH, CS contains higher level of fiber (NDF, ADF, lignin) and consequently has a lower amount of non-fiber carbohydrate, but no difference was observed in the other nutrients (i.e. crude protein, crude fat, and ash). IVDMD was significantly (p<0.05) the highest in 100% CH (71.97%) and the lowest in 100% CS (42.80%). Addition of CH by replacing TMR did not affect IVDMD, while an increase in the proportion of CS tended to decrease IVDMD. The total gas production after 48 hours of incubation and the rate of gas production were also the highest in 100% CH and the lowest in 100% CS (P<0.05). Likewise, the pH after 48 hours of fermentation was significantly (p<0.05) the lowest in 100% CH (6.33) and the highest in 100% CS (6.50), and no significant difference in gas production was observed when TMR was replaced with CS or CH up to 15% (P>0.05). In conclusion, CH may successfully be used for a supplement in a ruminant diet. The nutritive value of CS is relative low, but can replace, if not 100%, low quality forage. This study provides valuable information about the nutritive value of CS and CH. An in vivo trials, however, is needed for conclusively accessing the nutritive value of CS and CH.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.10
• /
• pp.1467-1475
• /
• 2016

To make soft and less stale bread, various amounts of gelatinized wheat flour dough were added for making pan bread. In the dough process, higher gelatinized wheat flour dough showed higher consistency and dough development time but a lower dough stability time. Expansion during fermentation represented the highest value upon addition of 10% gelatinized wheat flour dough (GWFD), and this value decreased with increasing amount of gelatinized wheat flour dough. Volume of bread was the highest in the control and lowest in 30% GWFD, and there was no difference between 10% GWFD and 20% GWFD. Moisture contents of bread made with various amounts of gelatinized wheat flour dough increased with increasing gelatinized wheat flour dough amount. Color values of bread made with various gelatinized wheat flour dough were not significantly different. Chewiness, brittleness, and hardness of bread made with control and 10% GWFD showed low values, whereas bread made with 20% GWFD and 30% GWFD showed high values. During storage, chewiness, brittleness, and hardness increased with increasing storage period in whole breads, whereas breads made with 10% GWFD showed the lowest increasing rate. In the sensory strength test, chewy texture increased upon addition of gelatinized wheat flour dough. In the consumer acceptance test, 10% GWFD showed the most overall acceptance. In conclusion, bread made with 10% gelatinized wheat flour dough is desirable for increasing softness and decreasing bread staling.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.541-548
• /
• 2002

This study, consisting of two experiments, was conducted to determine the effects of feeding heat treated protein and mineral complex (HPM) on milk production and composition, and ruminal fermentation of Holstein dairy cows. In in vitro experiment, HPM levels were 0, 0.2, 1 and 2%, and Timothy hay, which was substrate, was milled as 1 mm size, and the effects of HPM on pH, ammonia and VFA were analyzed after incubation times of 0, 6, 12, 24 and 48 h, respectively. The pH and ammonia production were not significantly different between treatments during the incubation. In addition, generally, total VFA and individual VFA were not affected by HPM on 0, 6 and 24 h. While, total VFA and individual VFA were increased in 0.2% and 1% of HPM supplemented treatments, but decreased in 2% of HPM treatment compared with control on 12 h. On 48 h, total VFA and individual VFA were increased in HPM treatments compared to control (P<0.05). However, A/P ratio was not affected by HPM supplementation. Gas production was higher in HPM treatment compared to control on 24 h (P<0.05) and 48 h (P<0.05). In lactating experiment, fourteen lactating Holstein cows were used for 4 months in a cross over experimental design. There were two treatments; no added HPM as a control and 0.2% of HPM added as a test treatment. Daily milk yield (P<0.001), 4% FCM (P<0.001), milk protein (P<0.05) and SNF (solid not fat; P<0.05) were increased in HPM treatment compared to control. While, milk fat, MUN (milk urea nitrogen) and SCC (somatic cell count) were not significantly different between treatments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.302-307
• /
• 2002

To investigate difference of components changes in salt-fermented anchovy, Engaulis japonicus sauce during 18 months fermentation by tank size, various chemical properties were examined at 2$\~$3 months intervals. The contents of total and amino nitrogen, total ATP related compounds increased gradually during 18 months of fermentation, and showed higher content in salt-fermented anchor sauce produced by large tank scale (LTS) product than those of small tank scale (STS) product during fermentation. Hypoxanthine and uric acid were the most abundant in ATP related compounds, ranging from $81.1\%$ to $90.4\%$, The cross point of inosine (HxR) + hypoxanthine (Hx) and uric acid was faster in LTS with 10.3 months fermentation than in STS with 12.6 months fermentation. After 18month of fermentation, the LTS was rich in free amino acids, such as glutamic acid, alanine, aspartic acid, valine, Iysine in that order. On the other hand, the STS was rich in free amino acids, glutamic acid, aspartic acid, alanine, vsine, valine in that order. Absorbance at 453 nm were higher in STS than in STS, but was no difference the rate of increase during fermentation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.7
• /
• pp.1125-1132
• /
• 2013

In the kimchi manufacturing process, the starter is cultured on a large-scale and needs to be supplied at a low price to kimchi factories. However, current high costs associated with the culture of lactic acid bacteria for the starter, have led to rising kimchi prices. To solve this problem, the development of a new medium for culturing lactic acid bacteria was studied. The base materials of a this novel medium consisted of Chinese cabbage extract, a carbon source, a nitrogen source, and inorganic salts. The optimal composition of this medium was determined to be 30% Chinese cabbage extract, 2% maltose, 0.25% yeast extract, and $2{\times}$ salt stock (2% sodium acetate trihydrate, 0.8% disodium hydrogen phosphate, 0.8% sodium citrate, 0.8% ammonium sulfate, 0.04% magnesium sulfate, 0.02% manganese sulfate). The newly developed medium was named MFL (medium for lactic acid bacteria). After culture for 24 hr at $30^{\circ}C$, the CFU/mL of Leuconostoc (Leuc.) citreum GR1 in MRS and MFL was $3.41{\times}10^9$ and $7.49{\times}10^9$, respectively. The number of cells in the MFL medium was 2.2 times higher than their number in the MRS media. In a scale-up process using this optimized medium, the fermentation conditions for Leuc. citreum GR1 were tested in a 2 L working volume using a 5 L jar fermentor at $30^{\circ}C$. At an impeller speed of 50 rpm (without pH control), the viable cell count was $8.60{\times}10^9$ CFU/mL. From studies on pH-stat control fermentation, the optimal pH and regulating agent was determined to be 6.8 and NaOH, respectively. At an impeller speed of 50 rpm with pH control, the viable cell count was $11.42{\times}10^9(1.14{\times}10^{10})$ CFU/mL after cultivation for 20 hr - a value was 3.34 times higher than that obtained using the MRS media in biomass production. This MFL media is expected to have economic advantages for the cultivation of Leuc. citreum GR1 as a starter for kimchi production.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.232-237
• /
• 2000

Theses studies were made on the mevinolin production from Penicillium citrinum Thom (KCTC 6990) Culture conditions pH temperature carbon sources nitrogen sources mineral sources surfactants and glucose concentration were optimized. The results of glucose concentration and maximum mevinolin production according to incubating time in the flask nearly disappeared after 5 days and appeared after 7 days respectively. temperature and pH conditions of maximum mevinolin production were $24^{\circ}C$ and 3.7 pH respectively. The results of maximum mevinolin production according to the kind of nutrients were as follows. Glucose of carbon sources were 3.5 mg/L. Peptone of nitrogen sources were 3.5 mg/L TEX>$K_2HP0_4$ of mineral sources was 3.8 mg/L Tween 20 of surfactants were 4.5 mg/L Maximum mevinolin productioni of glucose con-centration was 4.0mg/L of glucose 100 g/L In the batch culture Maximum mevinolin concentration was 10.3 mg/L after 8 days. maximum mevinolin specific production rate 0.016 mg/g-hr. These results need to be studied more than ever about temperature pH 야ㅕㅡ and treatment of by-product oil in the batch culture and must do the fad batch from now to increase mevinolin productivity.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.380-387
• /
• 1996

The growth of recombinant E. coli and formation of the by-products were investigated. Glucose was consumed in approximately 8hours of cultivation when initial glucose concentration was 5g/1. When higher initial glucose concentrations were employed, it took approximately 16 to 20hours for the glucose to be consumed. When maltose or glucose was used as a carbon source, lactic acid and acetic acid were main by-products, while propionic acid and methanol production was not significant. Much by- products were formed at the higher initial carbon source concentrations. Higher concentration of lactic acid was observed when glucose was used, while higher concentration of acetic acid was observed when maltose was used. Lactic acid production affected the cell yield while acetic acid production affected the growth rate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.211-216
• /
• 2009

This study was conducted to determine whether Pleurotus ostreatus (oyster mushroom), cultivated in various ratios with herbal extract remnants instead of cotton supplemented with nutrients (the control), improved mycelial growth, mushroom yields and longevity during storage. In addition, we investigated the transfer of medicinal herb components into the mushrooms since they contained non-specific medicinal herbs and their composition could not be controlled. Mushrooms cultivated with 70% and 100% medicinal herb remnants had faster growth rates, higher yields and less failure in the development of the fruit body than the control group. There were no differences in HPLC chromatogram among the methanol extracts of Pleurotus ostreatus in all groups. In addition, glycyrrhizin, an indicative compound of licorice which was a major herb among the herbal remnants, was not detected in any of the extracts. Pleurotus ostreatus that was cultivated with 70% and 100% herbal extract remnants had improved storage longevity in comparison with the control. They exhibited the least weight loss during storage among the groups and they maintained firmness in the stipe and pileus. However, the sources of media did not alter the color difference of the stipe and pileus or the quality index of the outward appearance during storage. In conclusion, cultivating media that contained over 70% of medicinal herb extract remnants increased the growth rates and yields of Pleurotus ostreatus. In addition, these mushrooms had enhanced storage longevity due to their firmness. Therefore, medicinal herb extract remnants should be utilized in the cultivating media of various mushrooms.

• Microbiology and Biotechnology Letters
• /
• v.33 no.1
• /
• pp.29-34
• /
• 2005

Lipase-producing bacteria (S3) were isolated from intertidal flat at Saemanguem. A isolated strain was identified as Psychrobacter species by physiological and fermentational characterization as well as 16S rRNA analysis. The strain was then named as Psychrobacter sp. S3. P. sp. S3 grew most rapidly at $30^{\circ}C$, but grew well even at $10^{\circ}C$ and its lipase activity was most high when cultivated at $20^{\circ}C$. Lipase S3 had optimum temperature of $30^{\circ}C$ for the hydrolysis of p-nitrophenyl caproate and had more than $80^{\circ}C$ activity even at $10^{\circ}C$. The activation energy was calculated to be 1.5 kcal/mol, which showed that it was a typical cold-adapted enzyme. It was an alkaline enzyme with optimum pH of $9.0\~9.5$. It could hydrolyze various length of triglycerides. Among them, it hydrolyzed most rapidly $C_4,\;C_{14},\; C_{16}-length$ triglycerides. When added to tributyrin-agarose gel, lipase S3 hydrolyzed tributyrin most rapidly at 30 and $40^{\circ}C$, but it could hydrolyze well even at $4^{\circ}C$.