• Journal of The Korean Association For Science Education
• /
• v.35 no.3
• /
• pp.419-429
• /
• 2015

In this study, we explored students' epistemological framing during scientific argumentation and how interactions among group members influenced group argumentation. Twenty-one gifted science students divided into groups of three or four participated in this study. Students' discussions related to data interpretation concerning the rate of photosynthesis were analyzed. Students' activities were videotaped in groups so the discourse could be transcribed and students' behavioral cues analyzed. Students' epistemological framing has been identified through analysis of their speech and behavioral responses to the anomalous data from the inquiry process. Subsequently, their sources of warrant and group argumentation levels were explored. We found out that group members framed the inquiry in two ways: "understanding phenomena" and "classroom game." Group members whose framing was "understanding phenomena" required other members to justify the anomalous data by examining its validity and reliability, which conclusively demonstrated a high level of argumentation. On the other hand, when group members used "classroom game" to frame their argumentation, they did not recognize the necessity of explaining the anomalous data; rather, these students used simple empirical justification to explain the data, reflecting a low level of argumentation. When students using different epistemological framing disagreed over interpretations of anomalous data throughout the discussion, clashes ensued that resulted in emotional conflict and a lack of discussion. Students' framing shifts were observed during the discussion on which group leaders seemed to have a huge influence. This study lays the foundation for future work on establishing productive framing to prompt scientific argumentation in science classrooms.

• Journal of the Korean Institute of Gas
• /
• v.23 no.6
• /
• pp.17-24
• /
• 2019

The combustion properties of the flammable substance used in industrial fields include lower/upper flash point, lower/upper explosion limit, autoignition temperature(AIT), fire point, and minimum oxygen concentration(MOC) etc.. The accurate assessment of these characteristics should be made for process and worker safety. In this study, tert-amylalcohol(TAA), which is widely used as a solvent for epoxy resins, oxidizers of olefins, fuel oils and biomass, was selected. The reason is that there are few researches on the reliability of combustion characteristics compared to other flammable materials. The flash point of the TAA was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of the TAA was measured by ASTM 659E. The lower/upper explosion limits of the TAA was estimated using the measured lower/upper flash points by Setaflash tester. The flash point of the TAA by using Setaflash and Pensky-Martens closed-cup testers were experimented at 19 ℃ and 21 ℃, respectively. The flash points of the TAA by Tag and Cleveland open cup testers were experimented at 28 ℃ and 34 ℃, respectively. The AIT of the TAA was experimented at 437 ℃. The LEL and UEL calculated by using lower and upper flash point of Setaflash were calculated at 1.10 vol% and 11.95 vol%, respectively.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.35-39
• /
• 2012

This paper analyzes the combustion diffusion pattern when a water purifier is artificially ignited outside and inside in order to provide data to examine the cause of fire of a water purifier damaged by fire. The analysis result of the combustion diffusion pattern of a water purifier shows that the combustion diffused at a higher speed when it was ignited inside the purifier than when ignited outside. It took approximately 360 seconds for the water purifier to be half-burned when ignited on the outside, and approximately 180 seconds when ignited from inside. That is, it is thought that the internal combustion speed is higher because the internal ignition causes the generated heat to be accumulated and radiated instantly. It was observed that the water purifier damaged by fire caused by external ignition showed a uniform carbonization pattern and the carbide burned down at the bottom were gradually deposited. The water purifier damaged by internal ignition showed a relatively clear boundary of carbonized surface, which formed a V-pattern. The difference in the combustion patterns presents an objective base from which to determine where the fire started. By the time the purifier was half-burned by fire, the built-in fuse had not melted and the power supply protection device did not operate. In addition, as was found in the case of the fuse damaged by a general fire, carbonization occurred at the metal holder, and it is thought that this fact may be used as a basis from which to determine the cause of a fire.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.145-153
• /
• 2010

Korea was experienced more forest fire occurrence compared to an area. As a forest fire occurrence from man caused burning for a farming increased and was one of the main reasons of forest fire occurrence in Korea, agriculturist-was a main reason of forest fire occurrence-opinion analysis was needed for forest fire prevention from this reason. Therefore, we asked agriculturist who live in province frequently experienced a forest fire from the burning for farming to answer questions. In result, a half of the respondents have a burning experience for farming and the main reason of the burning was the clearance around farmlands. In result of survey about recognition rate of forest fire prevention policy (forest fire season, incineration inhibition within 100 m from forest, license system for burning, joint burning system by a rural community, imposing a fine for burning) was almost high except license system for the burning, In the result about analysis according to ages and provinces, the recognition rate was high in province experienced severe forest fire damage and low in below 40 years group. So, the direction of forest fire prevention policy would need to be mediated in the view of agriculturist who need to use a fire because of farming labor shortage and higher age. And a consolidated education of forest fire prevention would be needed to agriculturist who live in province experienced rarely forest fire and in below 40 years group.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.168-177
• /
• 2011

The combustion test for real box of AC outdoor unit has been performed in this study in order to estimate the fire hazard in multi-system type of AC outdoor unit which is currently used for commercial use. The result showed that in test, there was explosion inside of AC outdoor unit, and flame erupted and fire spread through upper side grill. And then this fire burnt the combustibles such as wires, electronic control board, heat exchange copper plate and plastics etc inside the unit, refrigerant gas pipe was burst due to fire, and accelerated the explosion and flame eruption to outside while the refrigerant was erupting. It is found in this test that the maximum heat release rate of AC outdoor unit is 5,830 kW, the maximum internal temperature measured with infrared camera and thermocouple is $1,201^{\circ}C$, maximum ambient temperature is $881^{\circ}C$, and flame rose higher than about 5 m. It is concluded that the fire in AC outdoor unit cause fire to combustibles around the unit, and may give big damage by generating the secondary fire. It is expected that the result obtained from the test on the real object may be applied to fire realization of AC outdoor unit and estimation of fire spreading to the combustibles around in the future computer simulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.135-140
• /
• 2012

The mirror neuron system in the cerebrum, which are handled by visual information-based imitative learning. When we observe the observer's range of mirror neuron system, we can assume intention of performance through progress of neural activation as specific range, in include of partially hidden range. It is goal of our paper that imitative learning is applied to 3D vision-based intelligent system. We have experiment as stereo camera-based restoration about acquired 3D image our previous research Using Optical flow, unscented Kalman filter. At this point, 3D input image is sequential continuous image as including of partially hidden range. We used Hidden Markov Model to perform the intention recognition about performance as result of restoration-based hidden range. The dynamic inference function about sequential input data have compatible properties such as hand gesture recognition include of hidden range. In this paper, for proposed intention recognition, we already had a simulation about object outline and feature extraction in the previous research, we generated temporal continuous feature vector about feature extraction and when we apply to Hidden Markov Model, make a result of simulation about hand gesture classification according to intention pattern. We got the result of hand gesture classification as value of posterior probability, and proved the accuracy outstandingness through the result.