• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.510-518
• /
• 2018

Recently, lots of interests have been concentrated on the scrubber system that abates waste gases produced from semiconductor manufacturing processes. An effective design of the thermal decomposition reactor inside a scrubber system is significantly important since it is directly related to the removal performance of pollutants and overall stabilities. In the present study, a computational fluid dynamics (CFD) analysis was conducted to figure out the thermal and flow characteristics inside the reactor of wet scrubber. In order to verify the numerical method, the temperature at several monitoring points was compared to that of experimental results. Average error rates of 1.27~2.27% between both the results were achieved, and numerical results of the temperature distribution were in good agreement with the experimental data. By using the validated numerical method, the effect of the reactor geometry on the heat transfer rate was also taken into consideration. From the result, it was observed that the flow and temperature uniformity were significantly improved. Overall, our current study could provide useful information to identify the fluid behavior and thermal performance for various scrubber systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.129-136
• /
• 2017

Geographic Information System The geographic information system (GIS) has been limited to the government and some public sectors. Recently, the market has been diversified by combining with other areas such as mobile and CRM (Customer Relationship Management). The development direction of GIS technology in the 21st century is Web GIS, 3D GIS, mobile GIS, LBS, etc. as general technology for GIS application system development and spatial information service. In this study, we developed a new concept marking nail (a marking nail with built - in intelligent storage memory device) from the function of simple positioning of a marking nail related to a previously used underground item,, Burial depth, pipe thickness, piping material, management agency, contractor, contact, etc.) and store it in DB server, if necessary.Make it available in the right place. Through this research, it is possible to prevent and minimize various accidents caused by irregular excavation works, etc., and to provide information for establishing countermeasures related to sink holes. In order to provide systematic and reliable information on underground burial management, it was proposed to input information conveniently in the field, and the purpose was to reduce the incidence of buried underground pipes absolutely.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.207-214
• /
• 2014

With the depletion of high grade coal, it is indispensable to be used co-combustion of low rank coal with bituminous coal in pulverized coal-fired power plants. This study describes the detailed measurements of combustion characteristics of bituminous and subbituminous coal in a 0.7MWth pilot-scale test facility. This experimental works include the measurement of gas temperature, gas concentrations along with the reactor axial and radial distance at the condition of excess air ratio of 1.2. The solid sampling was carried out and analyzed with the combustion of bituminous coal. The main reaction zone of coal flame in a reactor was formed about 1 m from the swirl burner, and at downstream, the fully developed temperature and species distribution was observed. The sampled particles of bituminous coal in a reactor revealed the complete carbon burn-out was achieved just after an main combustion zone.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.357-368
• /
• 2018

For well over 100 years, oil has enabled remote communities to generate electricity and enjoy the benefits of a consistent electrical supply. Relying solely on oil for electricity generation has left island and remote communities exposed to several risks and drawbacks. Oil-based electricity generation is often more expensive and subject to price volatility, which can result in the use of risky fuel hedging strategies. The residents of islands and remote communities express concern over the future impacts of climate change or insist on their opinions for the corresponding action with reduction of carbon emissions. These risks and drawbacks can be overcomed with continuing cost reductions in solar, wind, and energy storage technologies by maker. Reducing costs is not always a straightforward process, relying on more diversely and renewably arranged renewable energy sources led to reduced local construction cost in every situation reviewed in this study. In this paper, a convenient and simple design solution which will facilitate the optimum location and transmission route of renewable energy facility using GIS(Geographic Information System) is proposed. The suggested solutions exercised to the case of geomoon island using GIS and identified by local site survey.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.414-420
• /
• 2018

The digital convergence looking for new ways to engage visitors by superimposing virtual content on projection over the real world captured media contents. This paper propose the Light ID based interactive 3D immersive exhibition things view using HMD AR technology. This approach does not required to add any additional infrastructure to be built-in to enable service and uses the installed Lighting or displays devices in the exhibit area. In this approach, the Light ID can be used as a Location Identifier and communication medium to access the content unlike the QR Tag which supports provide the download information through web interface. This utilize the advantages of camera based optical wireless communication (OWC) to receive the media content on smart device to deliver immersive 3D content visualization using AR. The proposed exhibition method is emulated on GALAXY S8 smart phone and the visual performance is evaluated for Jeonju Hanok Village. The experimental results shows that the proposed method can give immersive 3D view for exhibit things in real-time.

• Journal of Korea Game Society
• /
• v.7 no.3
• /
• pp.67-76
• /
• 2007

As the performance of game consoles is so highly progressed that services such as internet browsing become available on the consoles, the need for text input schemes on game consoles is rapidly raised. In this paper, we present a text input method of alphabet characters and several symbols using a gamepad, which is a widely used input device for most game consoles. Just like other text input methods using gamepad, our method allows users to enter texts by manipulating the gamepad with a user interface displayed on the screen of the console. A key idea of this paper is to present the user interface that is similar to the $4{\times}3$ keypad on mobile phones. The motivation of this idea is a principle that the experience of using a text input tool can be transferred to another tool that has similar interface. Another motivation is that the keyboard-based interface is too complex to be easily manipulated by simple input from a keypad, which is four orthogonal directions and several fire signals. Since most of keys on keypad of $4{\times}3$ keys are represented by a combination of two orthogonal directions, users feel easier in entering texts using keypad-based interface. We prove this argument in this paper by a user test of ten subjects. After about two experiment sessions, subjects reach 13 WPM in average, which proves that the proposed text input method enables much faster text input than the existing keyboard-based text input methods.

• Journal of Distribution Research
• /
• v.16 no.5
• /
• pp.1-18
• /
• 2011

Local assemblers of agricultural products perform important distribution functions such as providing sales outlets, labor forces, market information, and financing, forward contracting, farming, physical distribution, and etc. However, their business activities are not transparent and producers are not effectively protected from unfair practices done by local assemblers. In order to enhance transparency and to increase effectiveness of governmental policies, local assemblers, which are mostly private management, should be organized as corporations. In order to organize corporations, the government should emphasize the importance of education and should provide corporations with governmental funds for improvement of agricultural distribution. Corporations should be developed to marketing cooperatives in the long run, and are requested to form their federations. It is also necessary to have transparent forward contracting system by local assemblers. In order to have transparent system, producers and local assemblers are guided to use standard contract forms and to operate offices handling unfair trade practices by local assemblers. We also need a place to exchange forward contracts, which can be developed to a futures market in the long run. In summary, local assemblers of agricultural products, which are mostly private management, should be developed to corporations and be operated by a transparent manner in order to protect agricultural producers and increase efficiency of trading.

• Journal of Distribution Science
• /
• v.6 no.2
• /
• pp.5-19
• /
• 2008

This study aims to provide the present general state of basic data about refrigeration and freezing warehouses scold storages because basic data about refrigeration and freezing warehouses are insufficient and imperfect at the moment. Research contents include the present general state of cold storages such as sales amount, capital(money invested), storage possession state by type, keeping area, cold storage facility capacity, and facility state such as existence of rack, building structure and floor height, and possessed facility state. According to research results, it was found that 86.7% of refrigeration and freezing warehouses are located in the capital region and Busan region in terms of regional distribution, and the average keeping area was found to be bigger in these two regions than that of other regions. In addition, the research shows that more than 80% of companies possess bonded warehouses and there was no big difference in the size and capacity of refrigeration and freezing warehouses. Regarding building structure, most of them were found to be reinforced concrete. However, only 25% of companies installed racks, but there was no statistical significance between existence of rack and the amount of capital and sales. Possessed facilities were found in the order of freight elevator, information system and dock. When it comes to cargo gear, companies were found to possess 9.1 units of forklift and 2.2 units of reach stacker in average. This research is expected to lay a basis for investigating, predicting and developing the local cold storage industry, and more detailed studies will be needed in the future.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.2
• /
• pp.287-298
• /
• 1993

In this study, generation characteristics and distribution situation of the animal fat residue were investigated to identify it's management problems and to propose alternatives for the recycling and final disposal. Generation sources were the meat distribution net-work including about 170 slaughterhouses, 280 meat-packing plants, thousands of meat shops and restaurants etc. The daily total amount of the animal fat residue is about 700 ton/day. More than 60% of the generation sources were concentrated in Seoul metropolitan area. The residue was collected by about 300 men using old-fashioned devices like handcarts, bike and auto bike, transported to the recycling plants by about 60 collection agencies. The residue was processed to produce by-products such as grease, tallow, animal feed ingredient in the recycling plants. At present, however, a great number of unlicensed, and mostly small rendering processors without having pollution control facilities do the unlawful business. These small, old fashioned and unorganized businesses are creating environmental problems by disposing the waste in improper ways such as open burning and dump. Improvement of the distribution network, the large-scale plants, and the estabilishing proper infrastructures were suggested to overcome the problems for the sound fat residues reprocessing industry.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.350-359
• /
• 2011

Fast developments of broadcasting technologies since 1990s enabled not only High Definition Television service providing high quality audiovisual contents at home but also mobile broadcasting service providing audiovisual contents to high speed moving vehicle. Terrestrial Digital Multimedia Broadcasting (T-DMB) is one of the technologies developed for mobile broadcasting service, which has been successfully commercialized. One of the major technical breakthroughs achieved by T-DMB in addition to robust vehicular reception is an adoption of framework based on MPEG-4 System. It naturally enables integrated interactive data services by using Binary Format for Scene (BIFS) technology for scene description and representation of graphics object and Object Descriptor Framework representing multimedia service components as objects. T-DMB interactive data service has two fundamental limitations. Firstly, graphic data for interactive service should be always overlaid on top of a video not to be rendered out of it. Secondly, data for interactive service is only received by broadcasting channel. These limitations were considered as general in broadcasting systems. However, they are being considered as hard limitations for personalized data services using location information and user characteristics which are becoming widely used for data services of smart devices in these days. In this paper, the architecture of T-DMB hybrid data service is proposed which is utilizing broadcasting network, wireless internet and local storage for delivering BIFS data to overcome these limitations. This paper also presents hybrid BIFS technology to implement T-DMB hybrid data service while maintaining backward compatibility with legacy T-DMB players.