• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.77-85
• /
• 2007

This paper investigates the mechanical characteristics of composite geo-material which was developed to reuse both dredged soils and bottom ash. The composite geo-material used in this experiment consists of dredged soil taken from the construction site of Busan New Port, cement, air foam and bottom ash. Bottom ash is a by-product generated at the Samcheonpo thermal power plant. Several series of laboratory tests were performed to investigate behavior characteristics of composite gee-material, in particular the reinforcing effect by mixing bottom ash. The experimental results of composite geo-material indicated that the stress-strain relationship and the unconfined compressive strength are strongly influenced by mixing conditions. Especially it was observed that the compressive strength of composite geo-material increased with an increase in bottom ash content due to reinforcing effect by the bottom ash. Compressive strength of composite geo-material increased with the increase in curing time. The 28-day strength of composite geo-material is $1.7{\sim}1.8$ times higher than the 7-day strength. The moist unit weight strongly depended on air-foam content as well as bottom ash content added to the composite goo-material. In composite geo-material, secant modulus ($E_{50}$) also increased as its compressive strength increased due to the inclusion of bottom ash.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.419-425
• /
• 2023

This paper presents the research results of analyzing the high-temperature corrosion characteristics of three currently commercialized heat exchanger tube materials under actual operating conditions of a biomass power plant. In order to precisely analyze the high-temperature corrosion characteristics of these materials, a high-temperature corrosion evaluation device was installed in the power plant equipment, which allows for adjusting the surface temperature of the heat exchanger tubes. Experiments were conducted for approximately 300 hours under various temperature and operating conditions. In this study, the commercialized heat exchanger tube materials used were SA213T12, SA213T22, and SA213T91 alloys. In order to objectively analyze the high-temperature corrosion characteristics of each material, an international standard-based process to remove corrosion products was applied to obtain the weight change of the specimens, and the average thickness loss and corrosion rate were derived. Thus, the high-temperature corrosion results for each condition were quantitatively compared and analyzed. In addition, in order to increase the reliability of the high-temperature corrosion evaluation method introduced in this study, the surface and cross-sectional corrosion of the specimens were confirmed by using scanning electron microscopy and energy-dispersive X-ray analysis. Based on these analysis results, it was found that the corrosion resistance of the commercial heat exchanger materials increases as the content of chrome and nickel in the composition increases. Additionally, it was found that the corrosion phenomenon is rapidly accelerated as the surface temperature increases. Finally, the replacement period (lifetime) of the heat exchanger tubes under each condition could be inferred through this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.43-43
• /
• 2021

Sesan강과 Srepok강은 베트남, 캄보디아, 라오스가 공유하는 3S강 유역 (Sesan강, Srepok강, Sekong강)의 일부로 국제 공유하천으로 관리되고 있다. 3S강 유역은 Mekong강의 중요한 지류이며 Mekong강 유역의 상당 부분을 구성한다(Mekong강 유역 면적의 10%, 연간 총 유출량의 20%). 베트남에 속해 있는 Sesan강 유역면적은 11,255km², Srepok강 유역면적은 18,162km²이다. Sesan강과 Srepok강의 상류는 베트남 중부 고원의 긴 산맥에 위치하고 있으며, 하류는 캄보디아에 위치해 있어 상·하류간 긴밀한 협력이 필요하다. Sesan강과 Srepok강 유역은 기후변화에 따른 홍수, 가뭄, 수력발전소 건설로 인한 유출량 변동에 따른 상·하류 분쟁, 사면침식 및 퇴적 등 많은 문제와 도전에 직면할 것으로 예측되고 있다. 본 연구에서는 World Bank의 "Viet Nam Mekong Integrated Water Resources Management (M-IWRM) Project의 일환으로 베트남 정부 차원에서 처음으로 구축한 수자원관리 의사결정지원시스템인 "DSS-2S"를 활용하여, Sesan-Srepok강 유역의 수자원 계획을 수립하였다. DSS-2S는 MIKE Hydro Basin을 기반으로 SWAT모델 등과 연계 하여 구축되었다. DSS-2S는 2S 유역의 모든 주요 하천과 지류를 반영하였으며. 여기에는 17개의 수력발전 댐과 주요 지류에서 용량이 3백만 m³ 이상인 기타 저수지가 포함되었다. 이 보다 작은 용량의 저수지는 대표적인 저수지로 그룹화 되어 반영되었다. 기후변화 및 사회-경제적 발전계획 등을 반영하여, 2030년과 2050년을 목표연도로 생활, 공업, 농업, 관광, 유지용수 등 용수 수요를 추정하였다. 50% 및 85% 빈도의 공급 가능성을 고려하여 물 배분은 물 수요를 충족하고 지하수 개발 최소화를 기준으로 고려되었다. 분석 결과에 의하면 2S강 유역의 총 수자원은 32.2억 m³으로 그중 지표수자원은 29.2억 m³, 안정적으로 이용 가능한 지하수자원은 2.97억 m³으로 분석 되었으며, 지표수와 지하수 연계를 고려하면 전체 2S 강 유역에 물 부족하지는 않으나, 개별 공급 지점을 고려할 때 4월과 5월에 일부 지역에서 물 부족이 나타날 것으로 예측 된다. 장래 물 부족 해결을 위한 대안들을 제시하였으며, 본 성과는 베트남 중앙 정부의 장기수자원 종합계획 수립의 기본 자료로 활용 될 예정이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5A
• /
• pp.901-908
• /
• 2006

The structural integrity of containment building in Nuclear Power Plants has to be verified by the ISI(In Service Inspection) because there are some variations on the structural behavior of it due to the change of the physical properties of concrete and tendon with the lapse of time. In this study, the program 'SAPONC-CANDU' which can monitor and analyze the structural behavior of the containment building with grouted tendon (CANDU-type, 'Wolsong unit-2, 3, and 4' in Korea) was developed. This program is based on the algorithm which can calculate the prediction values of the quantities of strain variation for the vibrating-wire strain gauges embedded into the concrete of the containment building under temperature and time dependent factors which are creep, shrinkage, and prestressing force. The readings of the strain gauges are used as input data for the operation of the program. And it finally provides graphically a prediction value, line and band of the quantity of strain variation for the respective strain gauges, therefore, it is thought that the site engineers are able to assess the structural integrity of the domestic containment building with grouted tendon with easy using this program.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.709-719
• /
• 2023

In general, most of the electrical equipment responsible for control within power plants is housed in self-standing cabinets. These cabinets are typically fixed to a slab using post-installed anchors. Although the fixation method of using post-installed anchors provides stability, there is a risk of conductor failure due to external forces, including moments. However, the performance assessment of current anchors is only evaluated through uniaxial material tests. Therefore, the primary purpose of this study is to compare the static performance of post-installed anchors, considering on-site installation conditions, with their performance in material tests and to analyze the behavioral characteristics of the anchors. While conducting experiments using actual cabinets would be ideal, practical and spatial constraints make this approach difficult. As an alternative, experiments were conducted using a test specimen consisting of a steel column and a support. As a result, the pull-out performance of anchors reflecting on-site installation conditions was measured to be about 10% higher than that observed in material tests. The trends in load reduction and the point of maximum performance for the anchors also differed. To verify the reliability of the experimental study, a 3D FEM analysis was performed, which will provide predictive information on the loads transferred to the post-installed anchors for structural performance evaluations of electrical cabinets using shaking table test in the future.

• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.118-126
• /
• 2014

A survey was conducted on perceptions, knowledge, and attitudes of elementary, middle, and high school students, who will lead public opinion in the future, regarding irradiated food, nuclear power generation, and medical radiation. These topics urgently require general social acceptability among various fields in which radiation is used. Educational methods to enhance social acceptability were partially discovered. First, it is necessary to implement different strategies when designing courses for female and male students. Male students have higher levels of objective knowledge (p<0.039) of irradiated food, necessity (p<0.001) and objective knowledge (p<0.001) of nuclear power generation, approval of building a nuclear power plant in the nation (p<0.001), necessity (p<0.001) and objective knowledge (p<0.001) of medical radiation, and attitudes regarding using medical radiation (p<0.007, p<0.001). Second, the educational effect of explanations to help increase national understanding of the necessity and safety of nuclear power generation will increase if information on the necessity and safety of medical radiation is provided as well. Both male and female students perceived that medical radiation is the most necessary (p<0.001), medical radiation is the safest (p<0.001), and nuclear power generation is the least safe (p<0.013). Moreover, the correlation between medical radiation and nuclear power generation was the highest. Third, there is a need for different lectures between classes, since the patterns of perception vary according to the field of radiation use among elementary, middle, and high school students. Elementary school students had high interest in education on nuclear power generation (p<0.005), perceived that irradiated food is safe (p<0.001), and had the most positive attitude toward consuming irradiated food (p<0.001). Middle school students had high interest in education on nuclear power generation (p<0.018), perceived that nuclear power generation (p<0.001) and medical radiation (p<0.002) are safe, and had the most positive attitude toward using radiation for treatment (p<0.001). High school students had the highest level of objective knowledge on nuclear power generation (p<0.001) and medical radiation (p<0.001), and perceived that medical radiation is the most necessary (p<0.017); however, they perceived that nuclear power generation is the least safe (p<0.001). Attitudes toward irradiated food intake (p<0.001) and approving construction of a nuclear power plant in their neighborhood (p<0.001) were both low. Fourth, it is necessary to provide educational programs to change perceptions and improve attitudes rather than providing education focused on objective knowledge. There was no correlation between objective knowledge and necessity of irradiated food, objective knowledge and safety and interest in education on nuclear power generation, and objective knowledge and interest in education and information acquirement regarding medical radiation. In particular, high school students had the highest level of objective knowledge and yet had the least positive attitudes toward approving construction of nuclear power plants in their neighborhood and intake of irradiated food. Therefore, to increase the social acceptability of using nuclear energy and radiation in Korea, it is desirable to provide strategic educational programs to improve perceptions, knowledge, and attitudes regarding the necessity and safety of their use.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.5-6
• /
• 1972

Noise and air pollution, which accompany the development of industry and the increase of population, contribute to the deterioration of urban environment. The air pollution level of Seoul has gradually increased and the city residents are suffering from a high pollution of noise. If no measures were taken against pollution, the amount of emission of pollutant into air would be 36.7 thousand tons per year per square kilometer in 1975, three times more than that of 1970, and it would be the same level as that of United States in 1968. The main sources of air pollution in Seoul are the exhaust has from vehicles and the combustion of bunker-C oil for heating purpose. Thus, it is urgent that an exhaust gas cleaner should be instaled to every car and the fuel substituted by less sulfur-contained-oil to prevent the pollution. Transportation noise (vehicular noise and train noise) is the main component of urban noise problem. The average noise level in downtown area is about 75㏈ with maximum of 85㏈ and the vehicular homing was checked 100㏈ up and down. Therefore, the reduction of the number of bus-stop the strict regulation of homing in downtown area and a better maintenance of car should be an effective measures against noise pollution in urban areas. Within the distance of 200 metres from railroad, the train noise exceeds the limit specified by the pollution control law in Korea. Especially, the level of noise and steam-whistle of train as measured by the ISO evaluation can adversely affect the community activities of residents. To prevent environmental destruction, many developed countries have taken more positive action against worsening pollution and such an action is now urgently required in this country.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.115-123
• /
• 1990

The purpose of this study was to examine the uses of coal ash as a type of construction material. The methods of examination were chemical anlysis, soil laboratory test and the soil vibration test. Materials used were coal ash obtained as a by-product from 5 thermal power plants in Yongdong, Yongwol, Sochon(anthracite coal) and in Samchonpo and Honam (bituminous coal). Over 70% of the coal ash consisted of silica and alumina. The fly ash grain size showed a uniform distribution from fine-sand to silt, and that of the bottom ash showed from sand to gravel. The specific gravity and density of the coal ash were low. The long term strength increased gradually due to the self-setting property resulting from pozzolanic activity. The shear strength was higher than that of general soil. Cohesion and optimum moisture content of anthracite coal ash were higher than bituminous coal ash, whereas the maximum dry density was higher in bituminous coal ash. The coal ash dynamic Young's modulous curve range was similar to that of general soil. Of the results from the soil vibration test by car-running, the size relative acceleration level in the ash pond was higher than that of natural ground, but the damping ratio was lower than that of natural ground near the ash pond. The coal ash has more advantageous engineering properties than general soil with particles of the same size. For example, the California Bearing Ratio of the bottom ash at both Yongdong and Yongwol was 77~137%. Therefore we expect that if further study is done, coal ash can be used as a construction material when reclaiming seashore, construction embankments, road construction, making right-weight aggregate, or as a general construction material.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.281-290
• /
• 2016

Coastal areas, used as human utilization areas like leisure space, medical care, ports and power plants, etc., are regions that are continuously changing and interconnected with oceans and land. Regular monitoring of coastal changes is essential at key locations with such volatility. But the survey method of terrestial LiDAR(Light Detection and Ranging) system has much time consuming and many restrictions. For effective monitoring coastal changes, KIOST(Korea Institute of Ocean Science & Technology) has constructed a shipborne mobile LiDAR system. The shipborne mobile LiDAR system, installed in a research vessel, comprised a land based LiDAR(RIEGL LMS-420i), an IMU(MAGUS Inertial+), a RTKGNSS(LEICA GS15 GS25), and a fixed platform. The shipborne mobile LiDAR system is much more effective than a land based LiDAR system in the measuring of fore shore areas without shadow zone. Because the vessel with the shipborne mobile LiDAR system is continuously moved along the shoreline, it is possible to efficiently survey a large area in a relatively short time. We conducted test measurements in the Anmok-Songjung beach around the Gangneung port. Effective monitoring of the changes using the constructed shipborne mobile LiDAR system for seriously eroded coastal areas will be able to contribute to coastal erosion management and response.

• The Korean Journal of Quaternary Research
• /
• v.18 no.1 s.22
• /
• pp.21-30
• /
• 2004

The Ilgwang Fault is NNE-striking, elongated 40 Km between Ulsan and Haeundae-ku, Busan in southeastern part of the Korean Peninsula. This paper si mainly concerned about the ages of the fault activities especially in the Quaternary, inferred from classification of geomorphic surfaces and trench excavation for the construction of Singori nuclear power plant. The geomorphic surfaces are classified into Beach and the Alluvial plain, the 10 m a.s.l. Marine terrace(MIS 5a), the 20 m a.s.l. Marine terrace(MIS 5e), the Reworked surface of 45 m a.s.l. Marine terrace(MIS 7 or 9) and the Low relief erosional surface. The Low relief erosional surface is distributed coastal side, the Reworked surface of 45m a.s.l. Marine terrace inland side by the Ilgwang Fault Line as the boundary line. But the former is above 10 m higher in relative height than the latter. The 20 m a.s.l. Marine terrace on the elongation line of the Ilgwang Fault reveals no dislocation. A site was trenched on the straight contact line with $N30^{\circ}E$-striking between the 10 m a.s.l. Marine terrace and the 20 m a.s.l. Marine terrace. Fault line or dislocation was not observable in the trench excavation. Accordingly, the straight contact line is inferred as the ancient shore line of the 10 m a.s.l. Marine terrace. The Ages of the Fault activities are inferred after the formation of the Ichonri formation - before the formation of the 45 m a.s.l. Marine terrace(220 Ka. y. B.P. or 320. Ka. y. B.P.). The Low relief erosional surface was an island above the sea-level during the formation of the 45 m a.s.l. marine terrace in the paleogeography.