• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.941-947
• /
• 2008

In the braking of a railroad car, mechanical brake systems using wheel tread and brake disk are applied as well as electrical brake systems by regenerator and rheostat. During disk braking, kinetic energy of the vehicle is converted into thermal energy through friction between disk and brake pad. And it causes high temperature concentration and generates thermal crack on the brake disk surface. In this study, comparative test process for heat-resistance of candidate materials was designed for development of brake disk materials having high heat-resistance. We also verified the efficiency of the process by experiments using conventional brake disk materials.

• 전기의세계
• /
• v.17 no.2
• /
• pp.35-37
• /
• 1968

증기 Turbine plant의 제어방식은 점점 더 복잡하게 고도화하고 있으며 원심 또는 유압조속기등 Lever와 유압기구의 조합으로 구성된 기계유압식 Governor 대신에 전자유압식 Governor(Electro-Hydraulic Governor, EHG 일반적으로 광의의 의미로는 전자유압식제어장치 Electro-Hydraulic Control System이라함)의 개발에 주력하고 있으며 본보고서는 이에 대한 시험결과를 기술한 것이다. 본보고서는 산업용(자가발전용) 증기 Turbine의 전자유압식 Governor에 관한 것으로서 기계유압식에서의 복잡한 Lever 기구, Relay 장치등 기계부분의 전자유압화와 고압제어유의 채용및 이에 따르는 각부분의 Module화, Solid State화 및 소형 Unit화에 의하여 취급및 보수가 용이한 고성능의 제어장치를 개발하게 되었다. 특히 미국의 GE사에서 이에 대한 개발이 앞서 있으며 현재 100MW까지 약 30대가 실용화되고 있다고 한다. (이글은 일본화력발전지 1968년 1월 제136호에서 발췌한 글이다.)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.183-188
• /
• 2003

The present work was conducted to build a propulsion system for an airship. For this purpose, free shaft gas-turbine was modified to produce electrical power. he experiments were carried out to analyze the driving rotor condition at various power shaft loads. From this analysis, an appropriate damping device was required, and the changeable inertial moment from the fly-wheel was applied. Without the appropriate damping device, instability was found, and it was resulted as power loss. Also the amount of inertial moment was certified by the performance of dynamic transient effects from the engine test results. Knowledge gained from this research could benefit the propulsion and power conversion community by increasing the better understanding of shaft loads and inertial effects.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.229-243
• /
• 2005

본 연구는 2001년 12월부터 2004년 12월까지 정부지원으로 유니슨(주)가 개발을 주관하고 포항공과대학교 및 국내 관련 기업이 참여한 콘소시엄에서 개발한 750kW Gearless형 풍력발전시스템의 국산화 개발에 관한 연구결과로서 풍력발전 시스템의 하중평가, 구성요소품의 설계 결과와 블레이드, 발전기 및 전력변환장치 등 개발요소품의 성능시험결과와 국제 설계인증 추진 및 시제품 제작에 대한 내용을 포함하고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.104-109
• /
• 2005

The aircraft gas turbine engines with the Electronic Engine Controls(EEC) had been developed to save fuel and enhance their performance in the early days, and had employed the health monitoring function in the Full Authority Digital Engine Controls(FADEC) to improve their reliability. This has led to an increasing demand for the certification technology of these controls. The design and certification issues of power supply, aircraft supplied data, failure modes, software verification/validation, and lightning requirements need to be addressed. This paper presents the design considerations and the certification techniques applied to the electronic engine controls. And it is believed that this paper will be basis to establish a requirement in Korean Airworthiness Standard.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.761-765
• /
• 1995

The old Timing Controller for Control Element Drive Mechanism (CEDM) is designed as an open loop control system because it is difficult to mount sensors within the Control Element Drive Mechanism(CEDM) which is operating under the pressure boundary of the reactor vessel. In this work new method which can be used to detect the CEDM operational conditions without mounting sensors within the CEDM housing is developed in order to resolve problems of the old Timing Controller. By using the developed new method, the new Timing Controller for the CEDM is designed as a closed loop controller which has features of the control rod drop prevention, fine position control and the coil life time extension. The algorithm developed under closed loop control concept resolves most problems occurred in the old Timing Controller and improves the performance and reliability of the system. During designing and testing of the Timing Controller algorithm, the real time CEDM simulator developed here was used. And all functions of the developed algorithm were verified using CEDM simulator with the real data collected from the site. The results show that the Timing Controller performs its intended functions properly.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.90-97
• /
• 2021

In this study, a Bi2Te3 thermoelectric generator (TEG) was fabricated to convert unused thermal energy into useful electrical energy. For the performance test, a dedicated experiment device consisting of a heating block operating with cartridge heaters and a cooling block through which a refrigerant flows was constructed. A 3×3 array of thermocouples was mounted on the heating block and the cooling block, respectively, to derive the temperature fields and heat transfer rate onto both sides of the TEG. Experiments were conducted for a total of 9 temperature differences, obtaining V-I and P-R curves. The results of 7 variables including Seebeck coefficients that have a major effect on performance were presented as a function of the temperature difference. The feasibility of the energy recovery performance of the developed TEG was verified from the maximum power output of 7.5W and conversion efficiency of 11.3%.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.17-29
• /
• 1996

현대 산업사회에서의 자동차는 사회 및 경제활동에 있어서 없어서는 안되는 필수 불가결한 생활의 일부분으로 자리잡은지 이미 오래이며, 국내에서도 1987년 이후로 급격한 증가추세에 있다. 또 한 갈수록 발전되는 첨단 전자제품의 개발로 자동차도 초기의 기계적인 제어에서 현재는 많은 부분이 전자 제어화 되고 있는 실정이다. EMI(ElectroMagnetic Interference)의 측면에서 자동차는 점화장치가 가장 많은 불요전자파를 발생 하고 잇으나, 지난 수십 년간의 법규제(유럽 및 북미)등을 적용하여 이미 자동차 제작사들은 이를 고 려하여 개발, 평가를 하여 불요전자파의 발생을 줄이고 있다. 그러나, 계속되는 전자화 및 첨단 전자 제품의 개발에 따라 자동차에도 고성능의 전자소자 등을 적용하게 되었으며 이는 새로운 EMI 측면의 문제를 발생시켰으며 EMS(ElectroMagnetic Suseptibility) 측면에서는 자동차의 기능이 오작동하여 시스템의 기능 불이행, 수송수단의 손실, 심지어는 인명의 손실 등 위해가 심각한 문제로 대두되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.619-622
• /
• 1986

컴퓨터 기술의 발달에 따라 디지탈 전산기는 연산처리 능력이 더욱 빨라지고, 더욱 큰 기억용량을 갖게 되었다. 따라서 산업공정, 화학프랜트, 원자력발전 및 항공분야 등의 복잡한 연속 동특성계에 대한 실시간 시뮬레이션이 가능하게 되었다. 특히 복잡한 연속 동특성계의 시뮬레이션 목적으로 Multiprocessor 형태의 전산기가 개발되었다. 이 Multiprocessor형태의 전산기는 D/A 변환기와 A/D 변환기를 갖추므로써 실시간 실물 모의시험(A real time hardware-in-the-loop simulation) 시의 컴퓨터와 외부장비와의 데이타 전달이 용이하여 졌다. 본 연구에서는 비행체의 비행자세를 제어하기 위한 조종장치의 설계해석 및 성능시험을 위하여 Multiprocessor를 이용하여 실시간 실물 모의실험이 가능함을 보였다. 본 시뮬레이션에 사용된 전산기는 AD10 전산기이다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.153-160
• /
• 2016

A developed skill of an intelligent CCTV is also advancing by using its Image Acquisition Device. The most important part in the field of detecting comparatively fast moving objects is to effectively reduce the loads on updating the background image in order to achieve real-time update. However, the ability of the current general-purpose computer extracting the texture as characteristics has limits in application mostly due to the loads on processes. In this thesis, an algorithm for real-time updating the background image in an applied area such as detecting the fast moving objects like a driving car in a video of at least 30 frames per second is suggested and the performance is analyzed by a test of extracting object region from real input image.