• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.65-71
• /
• 2020

Electrical energy is used for heating and cooling because electric cars do not have engines and cooling water. The downside is that when the heating and cooling system is applied to electric vehicles, about 40 percent of the energy is spent on heating and cooling, which is less efficient in winter. This has increased demand for electric vehicle battery efficiency. In this study, the condensation and dispersion of carbon nanotubes were controlled, and carbon fibers and composite slurry were manufactured without binders to manufacture paper. Manufactured by content showed the highest heat generation characteristic at 143℃ with a carbon fiber content ratio of 20wt% and confirmed that the heat temperature rises with increasing pressure. The plane heaters made through this study can be applied to a variety of products other than electric vehicles because they can be simplified by process and high temperature.

• Journal of the Korean Institute of Gas
• /
• v.17 no.5
• /
• pp.75-80
• /
• 2013

In this study, the effect of phosphorus flame retardants on the flame retardancy of the rigid polyurethane foam(PUF) was studied. Tetramethylene bis(orthophos-phorylurea)[TBPU] and Tris(2-chloroethyl) phosphate[TCEP], Tris(2-chloropropyl)phosphate [TCPP], Triethyl phosphate[TEP] were used as flame retardant. It was found that TBPU added PUF exhibits low mean heat release rate(HRR), peak HRR, effective heat of combusion(EHC), mass loss rate (MLR), CO yield and $CO_2$ compared other flame retardants.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.555-568
• /
• 1992

A asic study is performed on two-dimensional natural convective flow and heat transfer in a fluid heated internally within an inclined rectangular enclosures. For Rayleign numbers from 1.0*10$^{4}$to 1.5*10$^{5}$ , aspect ratio of 1/4, 1/3 and 1/2, and inclined angle from 0deg to 90deg, the governing equations were solved numerically and the experiments were performed by MachZehnder interferometer using low salinity water as a test fluid. For aspect ratios adapted in present study, the natural convection occures the most intensive at inclined angle of 0deg. This became weak at inclined angles of 60deg and 30deg in case of aspect ratios of 1/3 and 1/2 respectively. The intensity of flow was roughly in proportion to Rayliegh numbers and in proportion to the forth power of aspect ratios.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.10
• /
• pp.19-26
• /
• 2018

The purpose of this study was to analyze characteristics and to develop estimation model of IHG(Internal Heat Gain) from appliance in domestic apartment units. To do this, it was defined the source of IHG from appliance and the calculation method through the case study of international and domestic codes. And the equipment related datum such possession, usage or not, etc were collected through field survey in apartment units, and the appliances' electricity consumption were measured separately from overall electricity consumption. Annual electricity consumption value were calculated with field survey datum and appliances' electricity consumption measurement datum, and then IHG value was calculated by applying PHPP v9 method. And it was conducted correlation analysis between IHG value and the area for exclusive use, the number of occupants, and then the IHG from applianace estimation model was deducted with regression analysis. Finally, it was analyzed the present level and of the domestic code(The Building Energy Efficiency Rating System) comparing with the value of estimation model, and the various international codes(HERS, Building America, SAP).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.35-36
• /
• 2023

Safety management of steel frame members is a very important part to maintain safety and function. However, precise inspection is not possible for steel frame members due to finishing materials and insulation materials, leading to poor inspection. For steel members, an insulating spray coating method is used for high thermal conductivity. The insulation spray method is not only uneconomical, but also has the disadvantage of spoiling the aesthetics. In addition, VOCs are released from paints used in spraying, so a solution is needed. In this study, heating paint was used to improve the disadvantages of the insulation spray coating method and the high thermal conductivity of steel frame members. In addition to this, in order to reduce VOCs generated from the paint, active clay was added to produce a functional exothermic paint, and then the experiment was conducted. As the amount of activated clay increased, the film thickness increased, and the VOCs emission and thermal conductivity decreased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.169-170
• /
• 2023

In this study, light-heat generating materials were produced in two ways, and the performance of two light-generating insulation sheets was reviewed. As a result of the experiment, it was possible to confirm the improved heating performance of the light heating insulation sheet compared to the existing bubble sheet. The light heat insulation sheet (b) showed improved thermal properties compared to the existing bubble sheet, and it is believed that the temperature has increased due to the combined effect of initial hydration heat and heat generation after installation. In future studies additional experiments are needed to compensate for the insufficient insulation performance due to the single bubble sheet through the double bubble sheet and to adjust the amount of light-generating materials added as a consideration of the optimal heat-generating effect of the light-generating insulation sheet (b).

• Journal of Energy Engineering
• /
• v.12 no.3
• /
• pp.184-189
• /
• 2003

A study of the property of Indolene-Methanol Plus High Alcolhols (MPHA) has been completed. The study invested the measurement of fuel properties. The fuel properties investigated are distillation characteristics, heating value, flash point, specific gravity and water tolerance. The alcohol concentration was varied from 0 to 100 percent by volume in clear Indolene. The measurement of fuel properties indicated that, in general, Indolene-MPHA blends have higher water tolerance, similar specific gravity, similar flash point and different distillation characteristics compared to Indolene-Methanol blends.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.131-136
• /
• 1993

일반적으로 공작기계 주축계에 대해서 요구되는 기본적인 항목들로는 고강성, 고감쇠, 고회전정밀도, 저발열, 장수명 등이 있다. 최근에는 이러한 기능들과 함께 가공능률과 가공정밀도의 향상을 도모하기 위해서 고속절삭을 실현햐ㄹ 수 있는 공작기계 주축계의 고속화, 즉 고속 주축계에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 고속주축계의 동특성을 체계적으로해석하기 위해서 주축회전수의 영향을 고려한 유한요소모델(finite element model)을 도입하였다. 특히 주축은 세장비가 비교적 자기 때문에 Timoshenko보 이론으로, 베어링은 유한한 폭을 가지고 있기 때문에 반경방향 외에도 모멘트방향의 강성 및 감쇠특성을 가지고 있는 것으로 모델화 하였다. 그리고 고속주축계의 설계조건들을 도출하기 위해서 동특성 해석결과들로 부터 고속주축계의 모드매개변수들인 고유진동수와 감쇠비에 대한 주축 회전수, 베어링의 지지특성, 베어 링의 간격, 주축재료의 내부감쇠율 등의 영향을 고찰하였다.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.17-25
• /
• 2009

세계의 모든 나라가 화석연료를 대체하는 태양광, 풍력 등의 그린에너지 기술개발에 주력하고 있으며, 한편으로는 에너지의 효율제고 및 재생을 위하여 폐기물로부터의 자원순환을 이룩하는 폐기에너지 회수에도 많은 노력을 기울이고 있다. 그 하나의 방편이 버려지는 쓰레기에서 에너지를 회수하는 고형재생연료인 RDF(생활폐기물 고형연료 제품, Refuse Derived Fuel) 생산이다. 우리나라에서는 유일하게 강원도 원주시에서 하루 80톤을 생산하고 있으며 아직은 기술도입 초기단계에 있는 가연성폐기물의 연료화 기술이다. RDF의 특성은 불연성 성분이 제거된 일반 가연물을 분쇄하여 압출성형 가공한 펠릿형상의 고체연료로서의 열적 특성이 우수하나 화재안전 측면에서는 제조 및 취급공정에서의 일반적인 가연물 화재위험성을 가지고 있고, 저장과정에서는 축열발열에 의한 자연발화 위험성이 상존하며, 저장형태, 특히 사이로의 경우 구조특성으로 인하여 화재진압도 쉽지않다. 본 논문에서는 일본의 RDF 화재사례를 중심으로 그 화재 위험 특성과 안전대책을 고찰하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.271-272
• /
• 2019

본 논문은 친환경 전기차용에 적용되는 있는 고밀도 LDC(Low-Voltage DC-DC Converter) 전력변환장치의 PCB구조와 스위칭소자에 따른 PCB의 발열특성을 해석한다. 전력변환장치 PCB사이에 알루미늄 플레이트를 적용하여 다면 방열경로를 통한 PCB방열특성을 비교하고, 또한 기존 Si-FET와 낮은 온 상태 도통저항을 가지는 GaN-FET 반도체디바이스를 적용한 전력변환장치의 PCB 방열특성을 시뮬레이션을 통해 비교 및 검토하였다.