• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.412-415
• /
• 2016

In this study, we fabricated the wearable film-heaters used in thermotherapy for senior citizens and investigated the heat generation characteristics. The wearable film-heaters embedded into eco-flex were constructed with indium tin oxide (ITO) nanoparticles coated on glass fibers. Under a stretching strain of 30%, the wearable film-heaters stably operated with temperature variation of 10%. In addition, the wearable film-heater worn on the wrist increased the temperature of the wrist from $35^{\circ}C$ to $43^{\circ}C$ within 2 min.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.645-648
• /
• 2008

In this study, to evaluate the correlation between hydration heat and autogenous shrinkage of high strength concrete in early age, statistical method present numerically hydration heat and autogenous shrinkage was studied. First of all, hydration heating velocity and autogenous shrinking velocity as quantitative coefficients which represent the main properties of hydration heat and autogenous shrinkage were proposed. Two coefficients were calculated by statistical analysis and were equal with the regression coefficient. To verify the validity of the proposed statistical analysis method, data of hydration heat and autogenous shrinkage gathered by a real experiment were analyzed by it. In results, properties of hydration heat and autogenous shrinkage of high strength concrete in early age were analyzed quantitatively. Also evaluation and comparison of the correlation between hydration heat and autogenous shrinkage with numerical value were possible.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.227-230
• /
• 2008

본 논문은 알칼리토금속계인 마그네슘 등의 수화 반응에 수반되는 반응열과 전기화학적 작용을 이용하여 버너와 같은 화기를 이용하지 않고 야외에서 생수 등을 간접가열 하여 커피, 컵라면, 분유, 피자등의 음식을 가열 할 수 있는 발열제품을 개발하는 데이터를 얻었다. 마그네슘과 금속계 화합물을 혼합하여 tea bag에 넣어 셀 형태로 만들어 발열효과를 높이기 위해 특수시험관의 재질 및 두께의존성, 발열제 양과 혼합물질에 따른 온도특성 등을 확인하였다. 발열제에서 발생되는 열의 효율적인 전달과 포장 재질의 선정 및 휴대의 간편성 등을 고려하여 타당성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.137-138
• /
• 2018

본 논문은 단일 배터리의 발열량 추정을 위한 전기-열적 해석을 수행하였다. 셀의 물리적 특성, SOC별 저항에 중점을 두어 발열량 추정을 하였다. 실험과 시뮬레이션을 비교하여 제시한 모델과 발열 저항의 의미를 확립 및 검증하며 단일 배터리의 방전구간 발열량을 추정하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.218-226
• /
• 2013

Of construction materials, cement and steel are the representative material that carbon dioxide. to reduce carbon emissions in the use of these materials The purpose of this study is low heat type blended cement, which is manufactured using a amount of cement than ordinary low heat blended cement. Low heat blended cement, mixing ratio of 10%, was investigated hydration properties and adiabatic temperature of concrete. The study in order to activate the reaction mineral admixture, a separate source of CaO and $SO_3$ areneeded. gypsum and lime, it expected amount of cement, low-carbon low-heat blended cement could reduce the hydration heat concrete than currentlyused low heat blended cement.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.5
• /
• pp.156-162
• /
• 2024

Silicon carbide (SiC), known for its excellent mechanical and chemical properties, is widely used in key industries such as aerospace, defense, and nuclear power generation. Due to its rapid heating characteristics when exposed to microwaves, SiC is being researched as a highly efficient heating element. In this study, Polycarbosilane (PCS) was treated by a mechanochemical reaction with iodine, followed by pyrolysis to create a microwave heating material. The effects of pyrolysis temperature and iodine additive content on microwave heating performance were investigated. The results showed that the fabricated specimen rapidly heated to a maximum of 800℃ within approximately 60 sec and maintained a stable temperature of 700~750℃ for up to 120 min.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.184-187
• /
• 2005

Performing thermal transient test on electric initiator with SUS 304 bridgewire(diameter 2.3mil) and $Zr-KClO_4$ primary charge and analysing the test data using Fitted Wire Model shows that the thermal characteristic parameter related to primary charge is changed sharply around $300^{\circ}C$. It is determined that this phenomenon is due to endothermic reaction from phase transition of $KClO_4$, which is used as primary charge, and to physical change of thermal transient interface between bridgewire and primary charge. With this results, useful temperature range for the parameter obtained from thermal transient test can be suggested.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.315-316
• /
• 2009

In this study, latent heat material was used to reduce hydration heating velocity of high-strength mass concrete. And the properties of hydration heat and autogenous shrinkage, and the relationship between hydration heat and autogenous shrinkage of high-strength mass concrete were numerically investigated.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.98-105
• /
• 2003

반도체 집적회로 제조 장치의 부품으로 사용되는 전도성 발열체를 박막형태로 제조하는 기술을 얻기 위하여 반도체와 금속을 혼합한 물질을 스퍼터 증착 기술 및 전자빔 증착기술을 이용하여 제작하고, 전기적, 재료적 특성을 분석하였다. 발열재료로는 몰리부덴과 실리콘 및 크롬 및 실리콘의 합금을 이용하였으며, 기판 물질은 알루미나와 실리콘질화막. 시리콘 산화막을 사용하였다. 발열물질은 온도의 상승파 하강에도 안정된 재료적 성질을 가져야 제품으로써 신뢰도를 유지할 수 있으므로 금속 (몰리부텐 또는 크롬) 실리사이드 (silicide)의 최종 phase 를 갖도록 하였는데, 실리사이드는 실리콘과 금속의 합금물질로 안정된 재료로 알려져 있다. 또한 발열재료의 온도저항계수를 최소화하도록 하였으며 온도저한계수 값의 범위가 20% 이내인 발열재료의 제조기술을 얻었다. 이러한 온도저항계수 최소화는 열교환 부품의 온도 정밀제어를 가능하게 한다.

• Fire Science and Engineering
• /
• v.13 no.1
• /
• pp.3-10
• /
• 1999

We had investigated combustion properties of natural textile dusts. Decomposition properles of natural textile dusts scavenged by precipitator of spinning factoη were investigated using D DSC(Differential Scanning Calorimeter) and TGA(Thermogravimetric Analysis) by temperature c changes. Combustion pro야rties of natural textile according to size distribution and amount were c checked as temperature variation according to time using spontan$\infty$us ignition apparatus. M Moreover, combustion properties with blowing or without blowing condition were checked in order to investigate combustion prope$\pi$ies in spontaneous ignition apparatus according to flow c condition of air. As results of thermal analyses, increase in r머sing tern야:rature causes initial smold벼ng t temperature to move towards low temperature section 뻐d i띠디떠 smoldering temperature was d de$\sigma$eased more remarkably in atmosphere than in inert gas and that condition allowed heating v value to increase considerably. In addition, as amount and size distribution of natural textile d dusts were increased, i띠ti머 smoldering temperature was lowered. All of combustion forms were s smoldering combustion. Initial smold밍ing temperature was low more slightly with blowing c condition than without blowing condition in sp$\alpha$ltaneoUS ignition apparatus, which condition m made heatim;!; value high.