• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.171-180
• /
• 2023

Hydrogen energy technology is gaining importance in the era of the Fourth Industrial Revolution, offering military advantages when applied to military vehicles due to its characteristics such as reduced greenhouse gas emissions, noise, and low vibration. Korea's military has initiated the Army Tiger 4.0 plan, focusing on hydrogen application, downsizing, and AI-based smart features. The Ministry of National Defense plans to collaborate with the Ministry of Environment to expand hydrogen charging stations nationwide, anticipating increased deployment of military hydrogen vehicles. However, considering the Jet Fire and VCE(Vapor Cloud Explosion) nature of hydrogen, ensuring safety during installation is crucial. Current military guidelines specify a minimum safety distance of 2m from adjacent buildings for charging stations. Scientific methods have been employed to quantitatively assess the accident damage range of hydrogen, proposing a minimum safety distance beyond the affected area.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.80-86
• /
• 2024

This study was conducted to evaluate the potential of rape stalk (RAS) as a raw material for the production of solid bio-fuels. RAS was immersed in an aqueous solution with acetic acid concentration of 1 percent, The content of reducing sugars separated from the RAS was analyzed. Glucose showed the highest content followed by xylose, galactose, arabinose and mannose. The immersed and non-immersed RAS were used for producing pellets with a pilot-scaled flat-die pellet mill. Bulk density and calorific values of the pellets improved with the use of the immersed RAS and the addition of wood particles. The values exceeded the minimum requirements for the A-grade of non-woody pellets (≧600 kg/m³ & ≧ 14.5 MJ/kg) designated by the ISO. Ash content of the pellets reduced with the immersion of RAS and the value satisfied the A-grade level (≦6.0%) of the ISO standard. The durability of the immersed RAS-based pellets was much higher than that of non-immersed IRS-based pellets, and the values were increased with the addition of wood particles. However, the durability did not meet the acceptance level for the B-grade of non-woody pellets (≧96.0%) designated by the ISO. These results suggested that the addition of binders in the production of non-woody pellets using an RAS immersed in acetic acid-based aqueous solution is required for the commercialization of the pellets.

• Clean Technology
• /
• v.17 no.1
• /
• pp.69-77
• /
• 2011

The intrinsic $CO_2$ separation and hydrogen production system is a novel concept using oxidation and reduction reactions of oxygen carrier for both $CO_2$ capture and high purity hydrogen production. The process consists of a fuel reactor (FR), a steam reactor (SR) and an air reactor (AR). The natural gas ($CH_4$) is oxidized to $CO_2$ and steam by the oxygen carrier in FR, whereas the steam is reduced to hydrogen by oxidation of the reduced oxygen carrier in SR. The oxygen carrier is fully oxidized by air in AR. In the present study, the chemical looping moving bed reactor having 200 L/h hydrogen production capacity is designed and the hydrodynamic properties were determined. Compared with other reactors, two moving bed reactors (FR, SR) were used to obtain high conversion and selectivity of the oxygen carrier. The desirable solid circulation rates are calculated to be in the range of $20{\sim}100kg/m^2s$ from the conceptual design. The solid circulation rate can be controlled by aeration in a loop-seal. To maintain the gas velocity in the moving beds (FR, SR) at the minimum fluidization velocity is found to be suitable for the stable operation. The solid holdup in moving beds decrease with increasing gas velocity and solid circulation rate.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Pediatric Infection and Vaccine
• /
• v.16 no.2
• /
• pp.123-130
• /
• 2009

Purpose : This study was performed to determine the clinical and epidemiologic characteristics of nosocomial rotavirus gastroenteritis. Methods : We retrospectively analyzed 628 medical records of patients with rotavirus gastroenteritis between 2001 and 2005. The patients were divided into two groups (the community-acquired group [528 cases] and the nosocomial group [100 cases]. The epidemiologic and clinical indices between the groups were analysed. For clinical comparison, 100 agematched cases were selected from the community-acquired group. Results : The male-to-female ratio was similar (1.4:1 vs. 1.5:1), but the mean age was lower in the nosocomial group compared to the community-acquired group (21.9${\pm}$15.5 months vs. 16.6${\pm}$10.3 months, P <0.001). The patterns of age distribution, annual frequency, and seasonal distribution were similar in both groups. The proportions of nosocomial cases in each year ranged from 9.8% to 22.4% of annual rotaviral infections, and these were not proportional to annual cases. The duration of fever appeared more prominent in the nosocomial group, and the severity of diarrhea was not different between the groups. The cases with a BUN >20 mg/dL were more in the community-acquired group (16% vs. 4%, P=0.01). Conclusion : The clinical and epidemiologic charateristics of nosocomial rotavirus gastroenteritis were similar and correlated to those of the community-acquired gastroenteritis.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.135-143
• /
• 2015

This study evaluated fuel properties of composite materials which were prepared by mixing a waste activated carbon from the used purifier filter with torrefied wood powder. Wood species of the raw material of torrefied wood powder are oak wood (Quercus serrata Thunb. ex Murray) and pine wood (Pinus densiflora Siebold & Zucc). And the treatment conditions used for this study were 300 s, 450 s, and 600 s at $200^{\circ}C$ for the wood roaster. Also, the mixing ratios are 5 : 95, 10 : 90, 15 : 85, 20 : 80, 40 : 60, 60 : 40 and 80 : 20 (waste activated carbon : torrefied wood powder). The fuel properties such as highly heating value (HHV), elementary analysis and ash content were evaluated. The results obtained are followings; 1. Despite the same treatment condition of wood roasting, pine wood has higher carbon contents than oak wood. Therefore, pine wood indicated the optimum carbonization at low temperature and short treatment times. 2. The gross calorific value and ash content increased as the mixing ratio of waste activated carbon increased. 3. Mixtures of the waste activated carbon and torrefied wood powder showed greater gross calorific value than those of the mixtures of waste activated carbon and the untreated wood powder. Also, the pine wood resulted in higher heating value that thaose of the oak wood. 4. When composite fuels that were composed waste activate carbon and wood powder are used, higher temperature conditions are required because the combustion is incomplete at $800^{\circ}C$ and 4 hours. 5. The increasing rate of the gross calorific value of mixtures of waste activated carbon and untreated wood powder is higher than does the mixtures of waste activated carbon and torrefied wood powder. Also, this phenomenon is more obvious for pine woods. Therefore, an optimal mixing ratio of waste activated carbon was determined to be between 5% and 10% (wt%). Also, this condition satisfied the requirement of the No.1 grade of wood pellet.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.93-101
• /
• 2014

Asymmetric 1,2-distearoyl-3-oleoyl-rac-glycerol (SSO) triacylglycerol (TAG) is used as a cocoa butter replacer (CBR). In this study, it was produced by lipase-catalyzed interesterification of fully hydrogenated soybean oil (FHSBO) and oleic ethyl ester (OEE) in a batch type reactor at $75^{\circ}C$, 250 rpm. Different molar ratios (FHSBO : OEE=1:1, 1:2 and 1:3, w/w) and various reaction times (1, 2, 3, 4, and 5 hr) were also tested. The optimized condition for SSO was a FHSBO : OEE molar ratio of =1:1 at reaction times of 2, 3, 4, and 5 hr. Enzymatic synthesis generated SSO/SOS, as well as the other TAGs (e.g., PSO/POS, SOO/OSO, SSS), ethyl esters, monoacylglycerol (MAG), and diacylglycerol (DAG). After scale-up, fractionation by solvent (methanol and acetone) fractionation and column chromatography was applied. To reduce ethyl esters, high-melting TAGs (e.g., SSS), and SOO/OSO in reactants, solvent fractionation was applied. Using a silica gel column (sample : silica gel=2:1, wt%), MAG and DAG were removed at $25^{\circ}C$. The major fatty acid composition of the final products (with a high SSO/SOS content) was palmitic acid (C16:0, 10.9~12.9 area%), stearic acid (C18:0, 52.2~54.9 area%), and oleic acid (C18:1, 34.2~35.5 area%). In reversed-phase HPLC analysis, the major TAG species of the final product (FHSBO : OEE=1:1, 2 hr) were SSO/SOS (82.31 area%) and PSO/POS (14.51 area%). Based on the $[SS]^+$ : $[SO]^+$ ratio obtained by RP-HPLC/APCI-MS, the final product had a higher SSO (AAB type TAG) content than cocoa butter (CB). The solid fat index (SFI) of CB and the final product obtained were similar with a narrow melting point range around ~32 to $35^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1572-1578
• /
• 2007

The specified wastes consist of waste acid, waste alkali, waste oil, waste organic solvent, waste resin, dust, sludge, infectious waste, and others. Among these specified wastes, a great portion is liquid phase wastes. The purpose of this study is to develop the high temperature and high pressure (HTHP) treatment system for decomposition of the liquid phase specified waste (LPSW). For this, we analyzed the physical and chemical properties of the LPSW such as density, proximate analysis, ultimate analysis, heating values, and designed 0.3 ton/day HTHP treatment system. The LPSW tested in this experiment were prepared by adding TCE(trichloroethylene) and toluene to liquid phase waste which was brought into the commercial waste treatment company. The average density of waste oil (25 samples), waste resin (5 samples), and waste solvent (12 samples) was 0.99 g/mL, 0.91 g/mL, and 0.93 g/mL, respectively. And the average lower heating value of waste oil, waste resin, and waste solvent was 8,294 kcal/kg, 5,809 kcal/kg, and 7,462 kcal/kg, respectively. The DRE (Destruction & Removal Efficiency) of TCE and toluene were 99.95% and 99.73% at atmospheric pressure conditions and that were 99.99% and 99.82% at pressurized conditions, respectively. These results showed that TCE/toluene mixtures were properly decomposed over about 99.73% of DRE by the HTHP treatment system and pressurized conditions were more effective to destroy those pollutants than atmospheric pressure conditions. Also these systems could be directly applied to industries which try to treat the liquid phase specified waste within the regulation limit.

• Journal of Life Science
• /
• v.33 no.1
• /
• pp.56-63
• /
• 2023

In this study, two cases of food poisoning caused by Salmonella that occurred in Gyeongsangnam-do in September 2021 are reported. One of the outbreaks occurred in a school and the other in a company. The molecular epidemiological characteristics of the isolated strains in the two outbreaks were analyzed. In the case of the school outbreak, 29 (4.9%) of 588 individuals experienced diarrhea and abdominal pain. As a result of a test of 36 individuals (patients, n=29; cook workers, n=7), Salmonella enterica serotype Enteritidis was detected in 17 (47.2%) patients, suggesting this serotype was the principal cause. Meanwhile, Salmonella spp. were not detected in 35 food and environmental samples. In the company outbreak, 87 (3.0%) of 2,900 individuals who had intaked from the same source experienced diarrhea, abdominal pain, and fever. In a test of 50 individuals (patients, n=40; cook workers, n=10), S. Enteritidis was detected in 28 patients (56.0%). Also, Vibrio cholerae (NAG) was detected in four patients with S. Enteritidis, and V. cholerae (NAG) only was detected in one patient. Salmonella spp. were not detected in 118 preserved foods, but S. Enteritidis was detected in one eaten food (toast) delivered in group by the company. Through PFGE genetic homology analysis of the isolated strains, all S. Enteritidis detected in patients and consumed foods were the same type. It seems that these S. Enteritidis isolates were the same type as detected in a previous school outbreak and in patients of group food poisoning in other regions, leading to an enhanced problem of food poisoning and epidemiology. Our analytic results can provide data for epidemiological management and food poisoning prevention based on molecular characteristics.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.613-621
• /
• 2007

Due to the increasing significance of durability, much researches on carbonation, one of the major deterioration phenomena are carried out. However, conventional researches based on fully hardened concrete are focused on prediction of carbonation depth and they sometimes cause errors. In contrast with steel members, behaviors in early-aged concrete such as porosity and hydrates (calcium hydroxide) are very important and may be changed under carbonation process. Because transportation of deteriorating factors is mainly dependent on porosity and saturation, it is desirable to consider these changes in behaviors in early-aged concrete under carbonation for reasonable analysis of durability in long term exposure or combined deterioration. As for porosity, unless the decrease in $CO_2$ diffusion due to change in porosity is considered, the results from the prediction is overestimated. The carbonation depth and characteristics of pore water are mainly determined by amount of calcium hydroxide, and bound chloride content in carbonated concrete is also affected. So Analysis based on test for hydration and porosity is recently carried out for evaluation of carbonation characteristics. In this study, changes in porosity and hydrate $(Ca(OH)_2)$ under carbonation process are performed through the tests. Mercury Intrusion Porosimetry (MIP) for changed porosity, Thermogravimetric Analysis (TGA) for amount of $(Ca(OH)_2)$ are carried out respectively and analysis technique for porosity and hydrates under carbonation is developed utilizing modeling for behavior in early-aged concrete such as multi component hydration heat model (MCHHM) and micro pore structure formation model (MPSFM). The results from developed technique is in reasonable agreement with experimental data, respectively and they are evaluated to be used for analysis of chloride behavior in carbonated concrete.