• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.390-392
• /
• 2006

단일 서스테인 구동회로서 패널을 수평으로 이등 분할하고 직렬 연결하여 구동회로의 전류 스트레스를 저감하는 새로운 단일 에너지 회수 서스테인 구동회로를 제안한다. 기존의 단일 서스테인 구동회로는 +Vs 및 -Vs의 양극성 전원을 사용함에 따라 기존 구동회로에 비해 전류 스트레스는 그대로이면서 스위치 전압 스트레스가 두 배가 되어 회로 손실 및 발열이 높은 단점을 가지고 있다. 이를 개선하기 위해 제안하는 패널 분할 직렬 연결 단일 에너지 회수 서스테인 구동회로는 패널을 수평으로 이등 분할하고 하프 브리지 인버터를 각각 연결하여 구동 회로의 가스 방전 전류 및 패널 캐패시터의 변위 전류를 기존의 절반으로 줄여 스위치들의 전류 스트레스를 저감하게 된다. 또한 에너지 회수 회로는 능동소자로서 단 하나의 스위치와 단하나의 다이오드만을 사용하므로 그 구조가 단순하여 원가를 절감할 수 한다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1903-1905
• /
• 2005

다중 코어를 이용한 대전류용 고효율 변압기 개발을 위해 고주파 손실이 작고, 전기 비저항이 큰 자성재료와 최적의 코어 형상 및 권선 방법에 대한 연구개발과 최종적으로 고효율 다중 코어를 이용한 변압기를 개발하고 전원장치에 적용하여 동작특성을 평가하였다. 최소 손실 온도를 $90^{\circ}C$ 이하로 감소시켜 100 kHz에서 250kW/m3의 낮은 전력손실을 갖는 다중 코어를 이용하여 변압기를 제조하고, 제조된 변압기가 채용된 컨버터의 50A 출력 전류에서 측정된 변압기의 발열특성은 30분 이후 약 $58^{\circ}C$까지 증가하였으며, $30{\sim}80A$의 출력 전류에서 85% 이상의 고효율을 얻었다.

• Journal of Korean Institute of Fire Investigation
• /
• v.4 no.1
• /
• pp.62-69
• /
• 2004

The purpose of this study on the sheath heater having high occurrence of fires in a small work place because of not having the safety device, was to find out the characteristics required in the field examination of the fires in the courses of investigation. The results of the experiments conducted and reviewed on the basis of the fire cases whose conditions of the ignition possibility were divided into A, E, C and D are as follows: When the sheath heater without safety device is left on the condition of the heat accumulation of which the temperature rapidly rise, and then ignite the inflammables of the surroundings. In such cases, it was characterized that the color change trace appeared even if no short trace was discovered in the power line.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.61-65
• /
• 2017

In this paper a prototype of high frequency heating power supply system based on the high frequency heating principle is designed to take the place of acupuncture, moxibustion, warm dressing treatment and some other traditional physical therapy methods. Which possess the advantages of low cost, convenient, easy operation and good effect. The high frequency heating power supply can generate a pulse voltage of more than 1KV with 300KHz switching frequency to heat the patient's skin. The skin temperature can reach to $41{\sim}42^{\circ}C$. The peak current control method is used to maintain the skin temperature in the designed range. The design of the main circuit is based on the flyback converter topology. An easier and practical design method is proposed in this paper. The power supply system prototype is verified to be stable and reliable by both the simulation and experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.48-55
• /
• 2014

These Xenon flashlamp power supply for Ultra Violet has converter with high voltage conversion ratio. General model is composed of transformer with high voltage conversion ratio and voltage doubler rectifier circuit. Purpose of power supply leads dielectric breakdown of Xenon flashlamp and passes current rapidly. When passing current, it has to limit current to avoid over-heat, damage of electrode and acceleration of gas oxidation which are cause of performance degradation of lamps. Generally, inductors and resistors, which are called as "Ballast," are used to limit currents. Generally, Transformer has high turn ratio to make high voltages. But we can get high voltages using the transformer with low turn ratio which is driven with self resonance. Also, an advantage of self resonance is to make a circuit simply through impedance of transformer in resonance frequency which filters output voltage. As using an unique impedance of transformer, the circuit does not need other impedance elements like the ballast. So the power supply assures high efficiency of the arc discharge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.117-122
• /
• 2018

A large-capacity three-phase system air conditioner recently includes an inverter circuit to reduce power consumption. The inverter circuit uses a DC voltage that comes from DC-link power capacitor with the function of rectifying, which means AC voltage to DC voltage using a diode. An electrolytic capacitor is generally used to satisfy the voltage ripple and current ripple conditions of a DC-link power capacitor used for rectifying. Reducing the capacitance of the capacitor decreases the size, weight, and cost of the circuit. This paper proposes an algorithm to reduce the input ripple current by combining the minimum point estimation phase locked loop (PLL) phase control and the average voltage d axis current control technique. When this algorithm was used, the input ripple current decreased by almost 90%. The current ripple of the DC-link capacitor decreased due to the decrease in input ripple current. The capacitor capacity can be reduced but the electrolytic capacitor has a heat generation problem and life-time limitations because of its large equivalent series resistance (ESR). This paper proposes a method to select a film capacitor considering the current ripple at DC-link stage instead of an electrolytic capacitor. The capacitance was selected considering the voltage limitation, RMS (Root Mean Square) current capacity, and RMS current frequency analysis. A $1680{\mu}F$ electrolytic capacitor can be reduced to a $20{\mu}F$ film capacitor, which has the benefit of size, weight and cost. These results were verified by motor operation.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.76-84
• /
• 2020

Most outlet fires occur around plug pins and plug pin receivers. However, no research has been conducted on ignitions at power connection points. This study confirms the possibility of ignition after incomplete connection, using a stranded wire, to the power connection point of an outlet. The experiment was divided into basic and reproducing experiments. The basic experiment confirmed the possibility of ignition according to the number of wire strands connected to the power connection point, and it identified the characteristics of the residue after the fire. In the reproducing experiment, lamps, vacuum cleaners, and heaters were connected to an outlet to check if the ignition at the connection advanced into a fire. The fire advanced due to the heat and arc generated at the connection point, and partial losses were identified in the U-type holder and clip. Accordingly, the results demonstrate that a fire may occur when the stranded wire is incompletely connected to the outlet. Moreover, it was confirmed that the cause of a fire can be determined based on the characteristics of the residue.

• Clinical and Experimental Pediatrics
• /
• v.48 no.8
• /
• pp.901-906
• /
• 2005

Kawasaki disease (KD) is a leading cause of acquired heart disease in children. Yet the etiology of KD is still unknown and diagnosis depends on the exclusion of other diseases and the clinical manifestations meeting the defined criteria. Young infants frequently show atypical clinical courses and are frequently complicated with coronary aneurysms. Some cases show thrombocytopenia, which is known as one of the risk factors for complications with coronary aneurysms. So, a high index of suspicion is the most important factor for the diagnosis of KD in very young infants or adolescents whose clinical courses are equivocal. We report herein on a case of KD in an 80-day-old female infant with fever and seizure with bloody stool; laboratory findings were those of sepsis with disseminated intravascular coagulopathy. In spite of aggressive treatments, fever and thrombocytopenia persisted for two weeks and huge coronary aneurysms developed at the third week in all three major coronary arteries; the diameter of the right one was as large as the aortic annulus. Three months later, huge pulsatile masses developed in both axillas; these were found to be huge axillary aneurysms defined very clearly on multi-detector CT scan. She has been under follow up with antiplatelets and anticoagulation therapy with poor regression of the aneurysms.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.19-29
• /
• 2003

This paper proposes a CMOS readout circuit for uncooled micro-bolometer arrays adopting a four-point step calibration technique. The proposed readout circuit employing an 11b analog-to-digital converter (ADC), a 7b digital-to-analog converter (DAC), and an automatic gain control circuit (AGC) extracts minute infrared (IR) signals from the large output signals of uncooled micro-bolometer arrays including DC bias currents, inter-pixel process variations, and self-heating effects. Die area and Power consumption of the ADC are minimized with merged-capacitor switching (MCS) technique adopted. The current mirror with high linearity is proposed at the output stage of the DAC to calibrate inter-pixel process variations and self-heating effects. The prototype is fabricated on a double-poly double-metal 1.2 um CMOS process and the measured power consumption is 110 ㎽ from a 4.5 V supply. The measured differential nonlinearity (DNL) and integrat nonlinearity (INL) of the 11b ADC show $\pm$0.9 LSB and $\pm$1.8 LSB, while the DNL and INL of the 7b DAC show $\pm$0.1 LSB and $\pm$0.1 LSB.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.136-141
• /
• 2010

The purpose of this study is to examine the structure and heat generation mechanism of low voltage switches used to turn on or off the power supply to an indoor lighting system and investigate how the fixtures and movable contacts of the switches are damaged depending on the types of energy sources in order to secure the judgment base for expected PL disputes. Based on the Korean Standard (KS) testing method for incombustibility, this study applied a general flame to the switch. In addition, current was supplied to the switch using the PCITS (Primary Current Injection Test System). The ambient temperature and humidity were maintained at $22{\pm}2^{\circ}C$ and 40~60% respectively while performing the test. It is thought that the switch generated heat due to a defective connection of the wire and clip, insulation deterioration and defective contact of the movable contact, etc. The surface of the switch damaged by the general flame was uniformly carbonized. When the flame source was removed, the fire on the switch was extinguished naturally. From the result obtained by disassembling the switch carbonized by the general flame, it could be seen that fixtures and movable contacts remained in comparatively good shape but the enclosure, clip support, movable contact, indicating lamp, etc. showed carbonization and discoloration. In the case of the switch damaged by overcurrent, the clip connecting the wires, clip support, etc. showed almost no trace of damage, but the fixtures, movable contact, indicating lamp, etc. were severely carbonized. That is, the sections with high contact resistance were intensively damaged and showed a damage pattern indicating that carbonization progressed from the inside to the outside. Therefore, it is possible to judge the initial energy source by analyzing the characteristics of the carbonization pattern and the metal fixtures of damaged switches.