• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.464-473
• /
• 2016

The air temperatures of the coast and inland are rising due to an increase in carbon dioxide emissions and abnormal climate phenomena caused by global warming, El Nino, La Nina and so on. The sea levels of the Earth are rising by approximately 2.0 mm per year (global average value) due to the thermal expansion of sea water, melting of glaciers and other causes by global warming. On the other hand, when it comes to designing a hydraulic structure or coastal hydraulic structure, the standard of the design water level is decided by analyzing four largeness tide values and a harmonic constant with the observed tidal water level or simulating numerical model. Therefore, the design tidal water level needs to consider an increasing speed of the seawater level, which corresponds to the design frequency. In the present study, the observed tidal water levels targeting 46 tidal stations operated by the Korea Hydrographic and Oceanographic Administration (KHOA) from the beginning of observations to 2015 per hour were collected. The variation of the monthly and yearly and increasing ratio were performed and divided into 7 seas, such as east and west part of the Southern Sea, south part and middle of the East Sea, south part and middle of the Western Sea, and Jeju Sea. The current study could be used to determine the cause of local seawater rises and reflect the design tidal water level as basic data.

• Journal of Korea Water Resources Association
• /
• v.48 no.5
• /
• pp.331-343
• /
• 2015

Most nonstationary frequency models are defined as the probability models containing the time-dependent parameters. For frequency analysis of annual maximum rainfall data, the Gumbel distribution is generally recommended in Korea. For the nonstationary Gumbel models, the time-dependent location and scale parameters are defined as linear and exponential relationship, respectively. The exponentially time-varying scale parameter of nonstationary Gumbel model is generally used because the scale parameter should be positive. However, the exponential form of scale parameter occasionally provides overestimated quantiles. In this study, various forms of time-varying scale parameters such as exponential, linear, and logarithmic forms were proposed and compared. The parameters were estimated based on the method of maximum likelihood. To compare the accuracy of each scale parameter, Monte Carlo simulation was performed for various conditions. Additionally, nonstationary frequency analysis was conducted for the sites which have more than 30 years data with a trend in rainfall data. As a result, nonstationary Gumbel model with exponentially time-varying scale parameter generally has the smallest root mean square error comparing with another forms.

• Journal of Conservation Science
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2017

The rock-carved seated Buddha of Unju temple of Hwasun, Jeonnam, the only Triad Buddha among the stone Buddhas of Unju temple, is currently designated as a tangible cultural property No. 275 of Jeollanam-do. The rock of the seated Triad Buddha bedrock is light-green andesitic tuff breccia that is composed of quartz and feldspar. The results of measurement of the whole rock magnetic susceptibility characteristics, the rock consists of a single sedimentary layer from top to bottom. The results of ultrasonic velocity measurement, show that the number of frequency of 1500~2000 m/s increased and the number of frequency of 2000~2500 m/s decreased in 2009 compared to 2015, and the measurement value for 2000 m/s or below was 87.5% in 2015, a 68.8% increase in comparison to that in 2009. Moreover, on the top, bottom, left side, and head areas of the Triad Buddha, a partial expanding tendency was observed in the range of low ultrasonic velocity. As weathering of the Triad Buddha occurs in the long term, on-going monitoring is required to ascertain the degree of change with time.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.174-179
• /
• 2015

Failure Mode and Effects Analysis (FMEA) has been used by Dynamic Positioning (DP) system for risk and reliability analysis. However, there are limitations associated with its implementation in offshore project. 1) since the failure data measured from the SCADA system is missing or unreliable, assessments of Severity, Occurrence, Detection are based on expert's knowledge; 2) it is not easy for experts to precisely evaluate the three risk factors. The risk factors are often expressed in a linguistic way. 3) the relative importance among three risk factors are rarely even considered. To solve these problems and improve the effectiveness of the traditional FMEA, we suggest a Fuzzy-FMEA method for risk and failure mode analysis in Dynamic Positioning System of offshore. The information gathered from DP FMEA report and DP FMEA Proving Trials is expressed using fuzzy linguistic terms. The proposed method is applied to an offshore Dynamic Positioning system, and the results are compared with traditional FMEA.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.437-444
• /
• 2017

The concentration of the HNS Accident for each region was confirmed to prepare against an HNS Spill accident by using a Concentration Index which is used to assess industry concentration trend. This is to present the HNS Accident Concentration Index by combining HNS Accident Scale Concentration Index and an HNS Accident Frequency Concentration Index based on the data of marine spill accidents including the HNS accident. Based on the HNS Accident Concentration Index, Ulsan was identified as a top priority region for preparedness, Yeosu, Busan and Taean were identified as priority regions for preparedness, Gunsan, Mokpo, Wando, Incheon, Tongyeong, Pyeongtaek and Pohang were identified as necessary regions for preparedness, Donghae, Boryeong, Buan, Seogwipo, Sokcho, Jeju and Changwon, in which no marine spill accidents occurred, were identified as support regions for preparedness.

• Journal of Chest Surgery
• /
• v.29 no.11
• /
• pp.1232-1240
• /
• 1996

From January 1990 through June 1995, we operated on 121 patients who were suspected for pulmonary tuberculosis without definite final diagnosis. After operation the final pathologic diagnoses were as follows: 68 pulmonary tuberculosis in which 29 were tuberculoma, 23 lung cancer, 16 bronchiectasis, 6 aspergilloma, 2 lung abscess, 2 benign cyst and 4 others. In 121 cases, 81 were male and 40 were female and the peak age incidence was 4th decade in tuberculosis (39.7%) and 6th and 7th decade in lung cancer (69.6%). The diagnoses in 44 cases presented roentgenographically as pulmonary nodules were pulmonary tuberculosis(29 cases) and lung cancer(15 cases). Tuberculous nodules tended to be smaller in size with calcification and satellite lesions compared to carcinomas. Indications for operation were solitary nodules 44 cases (36.4%); destroyed lobe 31(25.6%); hemoptysis 25 (20.7%); cavitary lesion 11(9.1 %); bronchostenosis 3 (2.5%); destroyed lung 5(4.1 %) and destroyed lung with empyema 2(1.7%). We conclude that preoperatively suspected pulmonary tuberculosis should be distinguished from various pulmonary lesions such as carcinoma, bronchiectasis, aspergilloma, lung abscess and benign cyst. For the possibility of carcinoma, pulmonary nodules of size greater than 3cm, non-calcified, non satellite lesion, newly developed nodule even under the anti-tuberculous medication, negative PPD skin test with elevated CEA level are recommended for an early resectional surgery and follow-up and delayed surgery is recommended in cases such as pulmonary nodules less than 3 cm in size with calcification, satellite lesion, positive PPD skin reaction and elevated ESR, CRP, ALP levels.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.66-73
• /
• 2023

The construction industry suffers losses due to failures in demand forecasting due to price fluctuations in construction raw materials, increased user costs due to project cost changes, and lack of forecasting system. Accordingly, it is necessary to improve the accuracy of construction raw material price forecasting. This study aims to predict the price of construction raw materials and verify applicability through the improvement of the Data Refactor technique. In order to improve the accuracy of price prediction of construction raw materials, the existing data refactor classification of low and high frequency and ARIMAX utilization method was improved to frequency-oriented and ARIMA method utilization, so that short-term (3 months in the future) six items such as construction raw materials lumber and cement were improved. ), mid-term (6 months in the future), and long-term (12 months in the future) price forecasts. As a result of the analysis, the predicted value based on the improved Data Refactor technique reduced the error and expanded the variability. Therefore, it is expected that the budget can be managed effectively by predicting the price of construction raw materials more accurately through the Data Refactor technique proposed in this study.

• Tunnel and Underground Space
• /
• v.34 no.4
• /
• pp.330-354
• /
• 2024

In site characterization of high-level radioactive waste, discontinuity(joint) distribution and rock mass classification, which are key evaluation parameters in the rock engineering field, were evaluated using deep boreholes in the Wonju granite and Chuncheon granite, which belong to Mesozoic Jurassic era. To evaluate joint distribution characteristics, fracture zones and joint surfaces extracted from ATV data were used, and major joint sets were evaluated along with joint frequency according to depth, dip direction, and dip. Both the Wonju and Chuncheon granites that were studied showed a tendency for the frequency of joints to increase linearly with depth, and joints with high angles were relatively widely distributed. In addition, relatively large amounts of weathering tended to occur even in deep depth due to groundwater inflow through high-angle joints. RQD values remained consistently low even at considerable depth. Meanwhile, joint groups with low angles showed different joint characteristics from joint sets with high angles. Rock mass classification was performed based on RMR system, and along with rock mass classification for 50 m intervals where uniaxial compressive strength was performed, continuous rock mass classification according to depth was performed using velocity log data and geostatistical techniques. The Wonju granite exhibited a superior rock mass class compared to the Chuncheon granite. In the 50 m interval and continuous rock mass classification, the shallow part of the Wonju granite showed a higher class than the deep part, and the deep part of the Chuncheon granite showed a higher class than the shallow part.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.19-26
• /
• 2013

This paper propose a surface EMG signal based gait phase recognition method that selects features and channels adaptively. The proposed method can be used to control powered artificial prosthetic for lower limb amputees and can reduce overhead in real-time pattern recognition by selecting adaptive channels and features in an embedded device. The method can enhance the classification accuracy by adaptively selecting channels and features based on sensitivity and specificity of each subject because EMG signal patterns may vary according to subject's locomotion convention. In the experiments, we found that the muscles with highest recognition rate are different between human subjects. The results also show that the average accuracy of the proposed method is about 91% whereas those of existing methods using all channels and/or features is about 50%. Therefore we assure that sEMG signal based gait phase recognition using small number of adaptive muscles and corresponding features can be applied to control powered artificial prosthetic for lower limb amputees.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.93-101
• /
• 2020

For the first time in Korea, aerosol type was separated as PD (Pure dust), DDM (Dust Dominant Mixed), PDM (Pollution Dominant Mixed), NA (Non-Absorbing), WA (Weakly Absorbing), MA (Moderately Absorbing), and SA (Strongly Absorbing) using depolarization ratio and single-scattering albedo based on AERONET sunphotometer data. Then, seasonal and annual occurrence frequency and AOD variation are analyzed. The proportion of pollution aerosols (NA, WA, MA, SA combined) was 58.9, 46.2, 59.5, and 67.1% at Anmyeon, Gosan, Gwangju, Seoul, respectively, with Seoul being the highest and the lowest at Gosan. Annual rate changestended to increase NA and decrease PD and DDM. The AOD by type showed the highest NA at all sites. In addition, the ratio of NA and AOD continued to increase.