• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.265-265
• /
• 2011

자발형성법으로 InP (001) 기판에 성장한 InAs/InAlGaAs 양자점(QDs: quantum dots)의 광학적 특성을 PL (photoluminescence)와 TRPL (time-resolved PL)을 이용하여 분석하였다. InAs QDs 시료는 single layer InAs QDs (QD1)과 7-stacked InAs QDs (QD2)를 사용하였다. 두 시료 모두 저온 (10 K)에서 1,320 nm에서 PL 피크가 나타나고, 온도가 증가함에 따라 PL 피크는 적색편이 (red-shift)를 보였다. 양자점의 온도를 10 K에서 300 K까지 증가하였을 때 QD1은 178 nm 적색편이 하였으며, PL 스펙트럼 폭은 온도가 증가함에 따라 증가하였다. 그러나 QD2는 264 nm 적색편이를 보였으며 PL 스펙트럼의 폭은 QD1 시료와 반대로 온도가 증가함에 따라 감소하였다. QD2의 아주 넓은 PL 스펙트럼 폭과 매우 큰 적색편이는 InAs 양자점 크기의 변화가 QD1에 비해 훨씬 크기 때문이다. QD2의 경우 InAs 층수(layer number)가 증가함에 따라 InAs QD의 크기가 점차 증가하므로 QD 크기의 변화가 single layer인 QD1 시료보다 훨씬 크다. QD1의 PL 소멸은 파장이 증가함에 따라 점차 느려지다가 PL 피크 근처에서 가장 느린 소멸 곡선을 보이고, 파장이 더 증가하였을 때 PL 소멸은 점차 빠르게 소멸하였다. 그러나 QD2의 PL 소멸곡선은 파장이 증가함에 따라 점차 빠르게 소멸하였다. 이것은 QD2는 양자점 크기의 변화가 매우 크기 때문에 (lateral size=18~29 nm, height=2.8~5.9 nm) 방출파장이 증가함에 따라 양자점 사이의 파동함수의 겹침이 증가하여 캐리어의 이완이 증가하기 때문으로 설명된다. 온도에 따른 TRPL 결과는 두 시료 모두 10 K에서 150 K 까지는 소멸시간이 증가하였고, 150 K 이후부터는 소멸시간이 감소하였다. 온도가 증가함에 따라 소멸시간이 증가하는 것은 양자점에서 장벽과 WL (wetting layer)로 운반자(carrier)의 이동, 양자점들 사이에 열에 의해 유도된 운반자의 재분배 등으로 인한 발광 재결합으로 설명할 수 있다. 150 K 이상에서 소멸시간이 감소하는 것은 열적효과에 의한 비발광 재결합 과정에 의한 운반자의 소멸이 증가하기 때문이다. 온도에 따른 TRPL 결과는 두 시료 모두 150 K까지는 발광재결합이 우세하고, 150 K 이상에서 비발광재겹합이 우세하게 나타났다.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.52-57
• /
• 1990

Employing a picosecond laser and fast electronics. we developed a time -correlated single photon counting (TCSPC) system by which ltuninescence lifetimes can be measured in the subnanosecond to microsecond scale. We also studied non-radiative decay dynamics and rotational motion of DODC! laser dye in solution using this system. ystem.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.342-347
• /
• 2012

The optical properties of InAs quantum dots (QDs) grown on a GaAs substrates by migration enhanced molecular beam epitaxy method have been investigated by using photoluminescence (PL) and time-resolved PL measurements. The luminescence properties of InAs/GaAs QDs have been studied as functions of temperature, excitation laser power, and emission wavelength. The PL peak of InAs QDs capped with $In_{0.15}Ga_{0.85}As$ layer (QD2) measured at 10 K is redshifted about 80 nm compared with that of InAs QDs with no InGaAs layer (QD1). This redshift of QD2 is attributed to the increase in dot size due to the diffusion of In from the InGaAs capping layer. The PL decay times of QD1 and QD2 at 10 K are 1.12 and 1.00 ns taken at the PL peak of 1,117 and 1,197 nm, respectively. The reduced decay time of QD2 can be explained by the improved carrier confinement and enhanced wave function overlap due to increased QD size. The PL decay times for both QD1 and QD2 are independent on the emission wavelength, indicating the uniformity of dot size.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.8
• /
• pp.646-651
• /
• 1998

In this present study, the luminescence characteristics and mechanism of energy $CaTiO_3$:Pr phosphor were studied using disk specimens sintered at various temperatures and envirenment. A single-phase $CaTiO_3$:Pr was synthesized by sintering above 140$0^{\circ}C$ and its crystal structure was found to be perovskite orthorhombic. A dominant peak around 360 nm and a broad peak around 395 nm were observed in the PLE(Photoluminescence Excitation) spectrum of $CaTiO_3$:Pr with fixed emission wavelength at 612 nm, the decay time of 360 nm excitation was found to be longer than that of 395 nm excitation. From this result, it is assumed that the free carrier excited to 360 nm is transferred to 395 nm energy level. Therefore, the decrease in 395 nm intensity observed in CaTiO$_3$:Pr specimens sintered in Ar gas environment induced shorter decay time and improved CL luminescence.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.297-297
• /
• 2012

양자점은 공간적으로 세 방향 모두 전하의 운동을 제한하는 0차원 구조로 불연속적인 상태 밀도를 가진다. 이런 양자점의 특성은 광통신용 소자, 레이저 다이오드 등과 같은 광학 및 전자 장치에 응용될 수 있기 때문에 많은 주목을 받아 활발히 연구되어 왔다. 본 연구에서는 MBE 장비를 이용하여 GaAs 기판위에 InAs 양자점을 성장시키는 동안 As의 공급을 임의로 차단시켜 양자점 형성 조건을 변화시킨 시료들의 광학적 특성을 Photoluminescence (PL) 와 Time-resolved PL (TRPL) 실험을 이용하여 분석하였다. GaAs (001) 기판 위에 GaAs buffer layer를 $610^{\circ}C$에서 성장한 후, $470^{\circ}C$에서 As 공급 조건 변화에 따른 InAs 양자점을 성장하였다. 양자점을 성장한 후 GaAs cap layer를 $610^{\circ}C$에서 성장하였다. InAs 양자점 시료들은 In을 20초 공급하는 동안 As의 공급과 차단을 각각 1초, 2초, 3초의 일정한 간격으로 반복하였다. 10 K에서 각각의 시료들의 PL을 측정한 결과 As 공급과 차단을 2초씩 반복한 T2시료에서 PL 세기가 가장 좋게 나타났으며, 3초씩 반복한 T3시료에서 가장 나쁘게 나타났다. PL 피크는 공급과 차단을 1초씩 반복한 T1 시료가 1.23 eV, T2 시료가 1.24 eV, T3 시료가 1.26 eV에 나타났으며, As의 차단시간이 증가함에 따라 PL 피크가 높은 에너지로 이동함을 보였다. 발광파장에 따른 PL 소멸은 파장이 증가함에 따라 점차 느려지다가 PL 피크 근처에서 가장 느린 소멸곡선을 보이고, 파장이 더 증가하였을 때 점차 빠르게 소멸하였다. As 공급 조건의 변화에 따라 InAs 양자점의 크기와 밀도, 모양 등이 변하는 것을 Atomic Force Microscope (AFM) image를 통하여 확인하였으며, PL과 TRPL을 이용하여 InAs 양자점의 광학적 특성을 분석하였다.

• Microbiology and Biotechnology Letters
• /
• v.28 no.2
• /
• pp.117-123
• /
• 2000

The object of this work is to improve the maintenance of bioluminescence from stored Photobacterium phosphoreum in a view of developing continuous monitoring system for pollutants. The long-term experiments were performed to determine the effect of storage temperature and immobilization on the maintenance of bioluminescence and viability of P. phosphoreum. A naturally luminescent bacterium, P. phosphoreum was starved in 2.5% Nael solution at $20^{\circ}C$, $4^{\circ}C$, -$20^{\circ}C$ and -$70^{\circ}C$ for 30 days. In vivo luminescence was measured by luminometry, and total cell concentrations and concentrations of culturable and viable cells were determined by acridine orange staining, dilution plate counting, and direct viable counting, respectively. The bioluminescence emission from cells stored at 4De was maintained up to 10 days while those with starved cells at other temperature ranges decreased to background level within 3 days. In terms of viability of cells, concentrations of cells stored at $20^{\circ}C$ were rapidly decreased as a result of cell lysis, leading to a drop in culturable and viable counts while cells stored at $4^{\circ}C$ was shown viable but nonculturable state during starvation. With immobilized cells on strontium alginate, the bioluminescence showed higher maintenance than free cells and decreased with count number of nonculturable cells.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.321-326
• /
• 2013

The effect of rapid thermal annealing (RTA) on the optical properties of digital-alloy InGaAlAs multiple quantum well (MQW) structures have been investigated by using photoluminescence (PL) and time-resolved PL measurements as a function of RTA temperature. The MQW samples were annealed from $700^{\circ}C$ to $850^{\circ}C$ for 30 s in a nitrogen atmosphere. The MQW sample annealed at $750^{\circ}C$ exhibited the strongest PL intensity and the narrowest FWHM (Full width at half maximum), indicating the reduced nonradiative recombination centers and the improved interfaces between the wells and barriers. The MQW samples annealed at $800^{\circ}C$ and $850^{\circ}C$ showed the decreased PL intensities and blueshifted PL peaks compared to $750^{\circ}C$-annealed sample. The blueshift of PL peak with increasing RTA temperatures are ascribed to the increase of aluminum due to intermixing of gallium (Ga) and aluminum (Al) in the interfaces of InGaAs/InAlAs short-period superlattices. The decrease of PL intensity after annealing at $800^{\circ}C$ and $850^{\circ}C$ are attributed to the interface roughening and lateral composition modulation caused by the interdiffusion of Ga and Al and indium segregation, respectively. With increasing RTA temperature the PL decay becomes slower, indicating the decrease of nonradiative defect centers. The optical properties of digital-alloy InGaAlAs MQW structures can be improved significantly with optimum RTA conditions.

• Journal of the Korean Vacuum Society
• /
• v.14 no.2
• /
• pp.78-83
• /
• 2005

Nanometric crystalline silicon (no-Si) embedded in dielectric medium has been paid attention as an efficient light emitting center for more than a decade. In nc-Si, excitonic electron-hole pairs are considered to attribute to radiative recombination. However the surface defects surrounding no-Si is one of non-radiative decay paths competing with the radiative band edge transition, ultimately which makes the emission efficiency of no-Si very poor. In order to passivate those defects - dangling bonds in the $Si:SiO_2$ interface, hydrogen is usually utilized. The luminescence yield from no-Si is dramatically enhanced by defect termination. However due to relatively high mobility of hydrogen in a matrix, hydrogen-terminated no-Si may no longer sustain the enhancement effect on subsequent thermal processes. Therefore instead of easily reversible hydrogen, phosphorus was introduced by ion implantation, expecting to have the same enhancement effect and to be more resistive against succeeding thermal treatments. Samples were Prepared by 400 keV Si implantation with doses of $1\times10^{17}\;Si/cm^2$ and by multi-energy Phosphorus implantation to make relatively uniform phosphorus concentration in the region where implanted Si ions are distributed. Crystalline silicon was precipitated by annealing at $1,100^{\circ}C$ for 2 hours in Ar environment and subsequent annealing were performed for an hour in Ar at a few temperature stages up to $1,000^{\circ}C$ to show improved thermal resistance. Experimental data such as enhancement effect of PL yield, decay time, peak shift for the phosphorus implanted nc-Si are shown, and the possible mechanisms are discussed as well.

• Journal of the Korean Vacuum Society
• /
• v.22 no.2
• /
• pp.86-91
• /
• 2013

The optical properties of InAs quantum dots (QDs) grown on GaAs substrates grown by molecular beam epitaxy have been studied using photoluminescence (PL) and time-resolved PL measurements. InAs QDs were grown using an arsenic interruption growth (AIG) technique, in which the As flux was periodically interrupted by a closed As shutter during InAs QDs growth. In this study, the shutter of As source was periodically opened and closed for 1 (S1), 2 (S2), or 3 s (S3). For comparison, an InAs QD sample (S0) without As interruption was grown in a pure GaAs matrix for 20 s. The PL intensity of InAs QD samples grown by AIG technique is stronger than that of the reference sample (S0). While the PL peaks of S1 and S2 are redshifted compared to that of S0, the PL peak of S3 is blueshifted from that of S0. The increase of the PL intensity for the InAs QDs grown by AIG technique can be explained by the reduced InAs clusters, the increased QD density, the improved QD uniformity, and the improved aspect ratio (height/length). The redshift (blueshift) of the PL peak for S1 (S3) compared with that for S0 is attributed to the increase (decrease) in the QD average length compared to the average length of S0. The PL intensity, PL peak position, and PL decay time have been investigated as functions of temperature and emission wavelength. S2 shows no InAs clusters, the increased InAs QD density, the improved QD uniformity, and the improved QD aspect ratio. S2 also shows the strongest PL intensity and the longest PL decay time. These results indicate that the size (shape), density, and uniformity of InAs QDs can be controlled by using AIG technique. Therefore the emission wavelength and luminescence properties of InAs/GaAs QDs can also be controlled.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.442-448
• /
• 2011

Self-assembled InAs/InAlGaAs quantum dots (QDs) grown on an InP (001) substrate have been investigated by using photoluminescence (PL) and time-resolved PL measurements. The single layer (QD1) and seven stacks (QD2) of InAs/InAlGaAs QDs grown by the conventional S-K growth mode were used. The PL peak at 10 K was 1,320 nm for both QD1 and QD2. As the temperature increases from 10 to 300 K, the PL peaks for QD1 and QD2 were red-shifted in the amount of 178 and 264 nm, respectively. For QD1, the PL decay increased with increasing emission wavelength from 1,216 to 1,320 nm, reaching a maximum decay time of 1.49 ns at 1,320 nm, and then decreased as the emission wavelength was increased further. However, the PL decay time for QD2 decreased continuously from 1.83 to 1.22 ns as the emission wavelength was increased from 1,130 to 1,600 nm, respectively. These PL and TRPL results for QD2 can be explained by the large variation in the QD size with stacking number caused by the phase separation of InAlGaAs.