• Title/Summary/Keyword: 반지

Search Result 519, Processing Time 0.026 seconds

Game Developer / MUSIC MANAGEMENT

  • Chance Thomas
    • Digital Contents
    • /
    • no.12 s.127
    • /
    • pp.154-159
    • /
    • 2003
  • 반지를 지키고자 하는 미들 사이즈의 난쟁이족인 호빗족과 반지를 손에 쥐어 제왕이 되고자 하는 여타의 부족간의 전쟁을 그린 비벤디유니버셜게임(Vivendi Universal Games)의 ' 반지의 제왕' 타이틀(Middle-Earth Online 포함) 제작에서 고심한 부분은‘원작자인 톨킨의 컨셉을 어떻게 기술로 표현할 수 있느냐’였다. 특히 그의 책에서 증거로 제시된 무자비한 야망 추구를 어떻게 나타내고 여러 개발자와 작자, 플랫폼과 게임의 전체 시리즈를 묶을 수 있는 음악을 만드는 것은 타이틀 제작에 있어 가장 큰 문제였다. 이번호에는 이 반지의 제왕 타이틀에서 출판사와 개발자 모두가 원하는 수준의 혁신적인 음악 구현을 어떻게 했는지 살펴본 후 혁신적인 음악 구현 시스템을 유지할 수 있는 프랜차이즈를 위한 진정한 음악 스타일 가이드를 제시한다.

  • PDF

임피던스 분석을 통한 유기태양전지의 bending에 따른 성능변화

  • Yu, Se-Gi
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.258.1-258.1
    • /
    • 2015
  • ITO가 코팅된 PET 기판 위에 P3HT:PCBM으로 이루어진 bulk heterojunction 유기 태양전지 소자를 만들었다. 이렇게 만들어진 유기 태양전지의 flexibility 특성을 측정하기 위해서, 태양전지 소자를 반지름이 다른 원통에 감아서 휘어지게 한 후 AM 1.5의 조명 하에서 전류-전압 특성을 관측하고 소자의 임피던스 분석도 측정하였다. 이때 flexibility 특성 측정의 일관성을 위하여, 단 하나의 유기 태양전지 소자를 만들고, 이 소자를 반지름이 큰 원통에서 부터 휘게 하고난 후 소자의 특성을 측정하고, 점차 작은 원통으로 바꾸어 가면서 측정을 진행하였다. 임피던스 분석 실험 자료로부터 shifted two semicircles이라는 equivalent circuit model를 분석하고 난 후, 이 회로를 구성하는 구성 성분-R(s), R(low f), R(hi f), C(low f), C(hi f)-값의 변화를 원통의 반지름의 변화에 따라 분석하였다. 반지름이 0.75cm일 때, power conversion efficiency (PCE) 값은 초기값에 비해 약 1/3로 줄었고, 반지름이 0.5cm일 때는 약 10%로 줄어 들었다. 나머지 1~2 cm일 때는 거의 변화가 나타나지 않았다. 휘어짐에 따른 이러한 태양전지의 특성의 변화를 임피던스 분석의 Cole-Cole plot의 저 주파수 영역의 반원의 반지름에 가장 큰 영향을 받음을 확인하였고, 저항과 capacitance 값의 변화에 따른 특성에 대해 이번 발표에서 더 자세히 설명할 예정이다.

  • PDF

Infection status of Tapes philippinarum collected from southern coastal areas of Korea with Parvatrema spp. (Digenea: Gymnophallidae) metacercariae (남해안 일부 지방산 반지락의 Parvatrema속 흡충 피낭유충 감염상)

  • Son, Un-Mok;Chae, Jong-Il;Lee, Sun-Hyeong
    • Parasites, Hosts and Diseases
    • /
    • v.34 no.4
    • /
    • pp.273-278
    • /
    • 1996
  • An epidemiologic survey along the several sites of southern coastal areas of Korean peninsula was performed to know the infection status of Pcnlotremc app. metacercariae in Tapes phiLlppirlawm. The clams were purchased from 13 coastal areas in Kyongsangnam- do alld Chollanam-do. in September, 1990. Each of them was digested with pepsin-HCI solution and examined under a stereomicroscope for the recovery of metacercariae. A total of 232 (77.3%) out of 300 examined clams were proved to have 1 to 273 Pawatrema app. metacercariae (54.7 in average). None of the clams from Samoan-myon Kosong-gun and Dolsan-up. Yochon-gun was infected with metacercariae. However, all of the clams from Yonghyon-myon, Sachon-guu, Dohwa-myon, Kohung-gun, Ahllyang-myon. Changhung- gun and Chiryang-myon. Kangiin-gun were infected with average 71, 31, 80 and 42 metacercariae respectively. Of the clams from Kohyon-myon, Namhae-gun, Doam-myon, Kangiin-gun and Kusan-myon. Uichang-guil examined, 97.5%. 95.0% and 90.0% were infected with about 117. 76 and 28 metacercariae. In other 4 surveyed areas. Seolchon rlyoll, Namhae-gun, Hwayang-myon. Yochon-gun Byollyang-myon, Sungju-gun and Bukpyong-myon, Haenam-gun. 55.0%-80.0% of clams were positive. and their average intensity of infection ranged from 6 to 25 metacercariae. From these results, it was confirmed that Tcpes philippincrum from southern coastal areas of Korea are highly infected by Parvatrema spp. metacercariae.

  • PDF

Photon Mapping Rendering Method using Variable Photon Radius (가변 포톤 반지름을 이용한 Photon Mapping 렌더링 방법)

  • 정재광;김재정
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.10b
    • /
    • pp.649-651
    • /
    • 2004
  • 본 논문은 전역조명을 효율적으로 계산하기 위한 렌더링 방법인 photon mapping 에서 물체의 조명 값을 계산하는데 필요한 radiance를 구하는 새로운 방법을 제안한다. 기존의 방법은 포톤과 표면과의 반응 종류에 상관없이 포톤을 저장할 때 단지 위치와 기타 정보만을 저장하는 방법을 사용했었다. 본 논문에서는 각각의 포톤에 하나의 반지름을 부여하여 물체 표면과의 반응 종류에 따라 가변적으로 반지름을 조절하는 방법을 사용하였다. 구현 후 실험 결과 비슷한 렌러링 시간에 이전에 사용되던 방법에 비해서 caustic 과 그림자 표현에서 더 나은 이미지 품질을 보여주었다. 또한 이전 방법에서 caustic을 명확하게 표현하기 위해서 사용했던 caustic map을 사용한 경우에 비해서 더 빠르게 렌더링 되는 결과가 나타났다.

  • PDF

A Circular UHF RFID Tag Antenna Design (UHF 대역의 원형 RFID 태그 안테나 설계)

  • Kim, Goo-Jo;Kim, Sinh-Hwan;Chung, You-Chung
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.18 no.3 s.118
    • /
    • pp.282-287
    • /
    • 2007
  • A circular UHF RFID tag has been designed. This circular tag antenna can be optimized simply by controling two parameters, outer radius and inner radius of the tag antenna. The resistance and resistance values of the tag antenna have been researched based on the variation of inner and outer radii of the circular tag antenna. The simulation and measurement results are compared.

Seismic Structure in the Northwestern Margin of the Okinawa Trough (오키나와트러프 북서 주변부의 탄성파 구조)

  • 선우돈
    • Economic and Environmental Geology
    • /
    • v.36 no.6
    • /
    • pp.491-499
    • /
    • 2003
  • The Okinawa Trough is a rift basin formed by extension. Analysis of multichannel seismic reflection profiles from the northwestern margin of the northern Okinawa Trough reveal that the trough is characterized by a series of tilted fault blocks bounded by listric normal faults and half-grabens developed between blocks, showing typical rifted structures. The trough display three kinds of sedimentary sequences with different seismic reflection characteristics: prerift, synrift and postrift sediments. The prerift sequence develops parallel to the dip direction of tilted fault blocks. The synrift sediments, mostly deposited in the half-grabens between tilted fault blocks, are generally well characterized by divergence of the reflectors towards the blocks indicating contemporaneous deposition during tilting. The postrift sediments are featured by continuous and parallel reflectors. The width of the half-graben and the throw-displacement rate of the basin bounding fault are closely connected. The throw-displacement rate is the maximum when the rifting event is the most active and the width of the half-graben is proportional to the rate.

A Case of Primary Signet Ring Cell Carcinoma of the Lung (원발성 기관지 반지세포암 1예)

  • Choi, Won-Il;Sohn, Jeong-Ho;Kwon, Oh-Young;Hur, Jeong-Suk;Hwang, Jae-Seok;Han, Seong-Beom;Song, Hong-Suck;Jeon, Young-June;Kwon, Kun-Young
    • Tuberculosis and Respiratory Diseases
    • /
    • v.41 no.5
    • /
    • pp.562-567
    • /
    • 1994
  • Signet ring cell carcinoma has been previously described in many organs, most frequently in the stomach, and rarely in the colon, rectum, gallbladder, pancreas, breast, nadsal cavity, prostate, urinary bladder and ureter. Signet ring cell carcinomas in the lung, especially, when examined by small biopsies, are generally believed to be metastatic. This case was diagnosed by bronchoscopic biopsy. We also examined various organs by noninvasive method, including UGI series, barium enema and abdomen CT scan, but all studies were nomal. Patient received cisplatin and etoposide combination chemotherapy followed by local radiotherapy as a primary non-small cell lung cancer. Patient died of his disease 6 months after diagnosis. Now we report a case of primary signet ring cell carcinoma of the lung.

  • PDF

Genetic Algorithm-based Generative Design for Creative Ring Design (독창적 반지 설계를 위한 유전자 알고리즘 기반의 변환생성 디자인)

  • Kim, Ko Uh;Kang, Sol Ji;Jee, Sang Hyeon;Lee, Seung Bok;Lee, Keon Myung
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.24 no.3
    • /
    • pp.233-238
    • /
    • 2014
  • Creativity is crucial in designing and producing attractive accessaries and daily supplies as well as art works. Generative design can be a paradigm to be used to obtain novel ideas or motifs for creative design works. This paper introduces a generative design method which comes up with unique ring models using genetic algorithm. It presents how the genetic algorithm works in terms of candidate solution coding, operators, and fitness evaluation function. The proposed method allows the customers to express their personal preference and later the preference to be reflected in fitness evaluation. In the final stage of the proposed method, several ring models are suggested for customers to choose on their own. The chosen ring models can be put into physical rings with the help of a 3D printer because the models are expressed in 3D geometric structures.

초미세 이중 금속 광공진기의 특성과 응용

  • Gwon, Sun-Hong;Lee, Tae-U;Lee, Da-Eun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.133.1-133.1
    • /
    • 2014
  • 이 발표에서 우리는 수백 나노미터 크기인 두 개의 나노 금속 원반 또는 나노 블록이 백 나노미터 이하의 간격으로 결합된 초미세 이중 금속 플라즈몬 광공진기를 제안하고 그 응용을 살펴본다. 원반구조 경우, 반지름이 476 nm인 나노원반 두 개가 100 nm 두께의 유전체 원반의 양쪽에 위치하여 1550 nm 공진파장을 가진 표면 플라즈몬 whispering-gallery-mode (WGM)을 유전체 내에 형성한다. 유전체의 두께를 일정하게 유지할 경우, WGM의 공진파장은 원반의 반지름에 따라 줄어든다. 반면, 반지름이 일정할 때에는 두 금속 원반 사이의 유전체 두께가 줄어듦에 따라 두 금속 원반 사이에 작용하는 표면 플라즈몬의 결합이 강해져서 공진파장이 길어진다. 따라서, 일반적으로 공진기의 크기가 줄어듦에 따라 공진파장이 짧아지는 것과 달리, 제안된 원반구조에서 발생하는 WGM는 원반의 반지름과 유전체의 두께를 함께 줄여도 공진파장이 동일하게 유지되는 차별화된 특성을 가지고 있다. 최종적으로 같은 공진파장을 가지는 WGM를 반지름 88 m, 유전체 두께 10 nm의 공진기에서도 여기시킬 수 있음으로, 모드부피(V)를 1/160으로 줄일 수 있다. 이에 비해, 공진모드의 품위값(Q)은 증가된 금속의 흡수손실에 의해 1/3정도 줄어듦으로써, 공진기와 물질의 상호작용 정도를 보여주는 Q/V값은 크기가 줄어든 공진기에서 오히려 50배 가량 증가함을 확인할 수 있다. 이 같은 초미세 플라즈몬 공진기는 매우 작은 굴절율 센서로서 응용을 가지고 있으며, 1160 nm/(단위 굴절율 변화)의 높은 민감도를 보인다. 한편, $200{\times}150{\times}100nm3$의 크기를 가진 두 개의 금속 나노블록이 10 nm의 공기 간격을 가지고 결합된 나노 공진기는, 공기 간격 내에 강하게 집적된 838 nm의 공진파장을 가진 플라즈몬 공진기 모드를 여기시킨다. 제안된 공진모드는 공기간격이 줄어듦에 따라 공진파장이 급격하게 증가하는 특성을 가지므로 옹스토롬 정도의 분해능을 가진 두께 변화 센서로 응용할 수 있다. 예를 들어, 공기간격 2 nm에서는 1A 두께 변화에 대해 공진파장 변화는 약 40 nm로 매우 민감하게 변화한다.

  • PDF

A Study on Ring Marketing Strategy Digital Contents suitable for a class of Young Customer at Online Environment - focusing on marketing service strategies (온라인 환경에서 젊은 고객 수요층에 적합한 반지 마케팅 전략에 관한 연구 - 마케팅 서비스전략 중심으로)

  • Lee, Hyun-Chang;Shin, Seong-Yoon
    • Journal of Digital Convergence
    • /
    • v.14 no.2
    • /
    • pp.169-173
    • /
    • 2016
  • With the rapid growth of IT technology and development of online shopping, e-commerce activity through online environment is going to grow in various forms. And then the intense competition also more deepen in the companies within the online market. The study on the various contents production and environment configuration for sale strategies has been made. Among online market products, it is needed to develop marketing strategies for online sales related to rings products. In this paper, through the analysis of online content and components of companies, it has obtained the appropriate components in the ring industry. In particular, aiming to young customers, we looked about components suitable for them and built site. As a result based on the above analysis, we anticipate that it will be able to see forward to a competitive ring marketing.