• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.77-81
• /
• 2008

In the deeply coupled GPS/INS integrated systems, if the integration filter update period is longer than the period of GPS navigation data, the loss of correlation values occurs due to the bit transition. This problem can be resolved when data wipe off(DWO) is used. However, general DWO methods requires heavy computation or cannot be applied continuously. This paper proposes an effective DWO method using carrier phase discriminator In order to show validity of the proposed method, simulations were carried out. The simulation results show that the data bit is accurately estimated and conform that the loss of correlation values and the error of code phase is small.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.73-79
• /
• 2001

In this paper, the transmitted noise reduction performance of piezoelectric smart panels is experimentally studied. The proposed piezoelectric smart panels are comprised of plate structure on which piezoelectric sensor/actuators are bonded and sound absorbing material is provided. It is a combination of passive and active approaches utilizing a passive effect at high frequencies and an active effect at low frequencies. To prove the concept of piezoelectric smart panels, an acoustic measurement experiment is performed. An acoustic tunnel is designed and its acoustic characteristics are tested. Below 800Hz, the tunnel exhibits a plane wave guide characteristics. When an absorbing material is bonded on a single plate, a remarkable transmitted noise reduction in mid frequency range is observed except the first resonance frequency. By enabling the active control of single smart panel with negative feedback control. about 10dB noise reduction is achieved at the resonance frequencies. The double smart panel got 4dB at the first resonance frequency and has more potential to reduce the transmitted noise in a wide range frequency. Piezoelectric smart panels incorporating passive absorbing material and active piezoelectric devices is a promising technology for noise reduction in a wide range frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1155-1163
• /
• 2010

An algorithm of the conventional wavelet shift keying is carried out that the scaling function and wavelet are encoded to 1(mark) and 0(space) for the input binary data, respectively. Two bit modulation technique which uses four carrier frequencies is existed. Four carrier frequencies are defined as scaling function, inversed scaling function, wavelet, and inversed wavelet, which are encoded to 10, 11, 00 and 01, respectively. In this paper, we defined 4-ary SWSK (4-ary scaling wavelet shift keying) which is two bit modulation, and it is derived to the probability of bit error and symbol error of the defined system from QPSK. In order to analyze to the performance of 4-ary SWSK, we are obtained in terms of the probability of bit error and symbol error for QPSK (quadrature phase shift keying), MFSK(M-ary frequency shift keying) and proposed method. As a results of simulation, we confirmed that the proposed method was superior to the performance in terms of the probability of bit error and symbol error.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.10
• /
• pp.419-426
• /
• 2022

In this paper, we propose a method to improve the accuracy of 3D human pose estimation model in various move motions. Existing human pose estimation models have some problems of jitter, inversion, swap, miss that cause miss coordinates when estimating human poses. These problems cause low accuracy of pose estimation models to detect exact coordinates of human poses. We propose a method that consists of detection and correction methods to handle with these problems. Deep learning-based outlier detection method detects outlier of human pose coordinates in move motion effectively and rule-based correction method corrects the outlier according to a simple rule. We have shown that the proposed method is effective in various motions with the experiments using 2D golf swing motion data and have shown the possibility of expansion from 2D to 3D coordinates.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.23-30
• /
• 1999

In this study, we propose a new optimization algorithm for a withdrawal weighted SAW transversal filter to satisfy given, specifications such as bandwidth, ripple, insertion loss, and sidelobe rejection level. An analysis tool for the withdrawal weighted filter has been produced by means of the delta function model, and has been applied to the design of a filter consisting of an uniform input IDT and a withdrawal weighted output IDT. This optimization algorithm consists of three routines, which eventually determines eight design parameters to satisfy the performance specifications. At the first step, the number of input and output IDT fingers and their geometrical size are determined by the insertion loss specification. At the next step, the bandwidth is controlled by the change of the IDT finger position. Finally, the sidelobe rejection level is modified through the add/skip technique of IDT fingers. The algorithm in this paper is distinct from conventional techniques in that it can simultaneously consider all the specifications such as bandwidth, ripple, sidelobe rejection level and insertion loss, and optimize the geometry of the withdrawal weighted SAW filter.

• Journal of Chest Surgery
• /
• v.32 no.4
• /
• pp.399-403
• /
• 1999

Background: Funnel chest is one of the most common anomaly of chest wall, which is manifested by depression of sternum and costal cartilage. Popular operative methods were Ravitch operation and Wada operation. Material and Method: From 1983 to 1996, 21 cases of funnel chest were corrected surgically in the department of thoracic surgery, National Medical Center. Investigated age and sex distribution, combined anomaly,clinical symptom, degree of correction and complication, postoperative satisfaction. We used 2 different surgical methods, one was Wada & its variants(17 cases), the other was Ravitch and it variants(4 cases). Most of operative indications were cosmetic problems. Result: The pre-operative Welch index was 4.188, but this index decreased to 3.46 after the operations.(p=0.046) The degree of correction was higher in Wada & it variant operation than the modified Ravitch operation.(p=0.54) Their results were satisfactory in 20 patients, while unsatisfactory in 1 patient because of a k-wire fracture. There was no recurrence of chest wall depression or postoperative death during the OPD follow up period. Conclusion: We recommend Wada operation in symmetric and small degree of depressive chest wall deformity in preand post school age.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.249-255
• /
• 2004

In fingerprint verification and identification, fingerprint and background region should be segmented. For this purpose, most systems obtain variance of brightness of X and Y direction using Sobel mask. To decide given local region is background or not, the variance is compared with a certain threshold. Although this method is simple, most fingerprint image does not separated with two region of fingerprint and background region. In this paper, we presented a new segmentation algorithm based on Run-Length Connectivity analysis. For a given binary image after thresholding, suggested algorithm calculates RL of X and Y direction. Until the given image is segmented to two regions, small run region is successively inverted. Experimental result show that this algorithm effectively separates fingerprint region and background region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7A
• /
• pp.627-634
• /
• 2011

In this paper, a new frequency offset estimation method in OFDM system is suggested. To measure fractional part of frequency offset, the repetition feature of cyclic prefix and that of training sequence is adopted. Both method shows relatively large frequency offset estimation error under low SNR circumstances, but this error can be greatly reduced by joint measurement of cyclic prefix and inversely repeated training symbol such as primary advanced preamble (PA-preamble) of IEEE 802.16m IMT-Advanced WiMax system. In this paper, the performance of suggested frequency offset estimation method is verified in IEEE 802.16m IMT Advanced WiMax system, using its PA-preamble and cyclic prefixes of A-preambles.

• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.1-7
• /
• 2021

In this paper, a method of extending 1 bit by adding an external device to a parallel interface type Digital-to-Analog conversion(D/A C) circuit is presented. To do this, the principle of the D/A C circuit was examined, and the problems that occur when extending one bit by adding individual devices were analyzed, and a bit extension method of the D/A devices using an OP-Amp. circuit was presented. As the proposed method uses the high-precision characteristics of the OP-Amp., even if an error occurs in the device, only the overall size of the output waveform is affected, and the voltage reversal phenomenon that occurs between each bit does not occur. In order to confirm the effect of the proposed method, an experimental circuit was constructed and the absolute voltage of the output and the relative error were measured. As a result, a voltage error of 0.0756% appeared, confirming that the 0.195% requirement for one bit expansion by adding individual devices was sufficiently satisfied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1338-1342
• /
• 2006

수자원의 계획과 관리를 위해 정확한 유량 측정은 무엇보다 중요하다. 이를 위해 다양한 유량 측정방법이 개발, 적용되고 있다. 본 연구는 국내 하천에 적용 가능한 다양한 유량 측정방법을 시험하천에 동시에 적용하여 유량 측정 방법간 비교를 목적으로 수행되었다. 비교를 위해 적용된 방법은 유속면적법, 부자법, ADCP법 등의 비연속적 방법과 기존 보를 이용한 방법, 초음파 유량계를 이용한 방법, 유속지수법, 실시간 경사면적법 등의 연속적 방법이다. 평저수기에 주로 적용될 수 있는 비연속적 방법인 유속면적법과 ADCP법의 비교에서는 유속면적법이 방류량 대비 평균 ${\pm}4.7%$의 오차를 가지며, ADCP법의 경우 ${\pm}4.6%$의 오차를 갖는 것으로 나타났다. 비연속적 방법과 연속적 방법을 동시에 비교하기 위해 평저수 5회, 홍수 2회를 포함하는 총 7회의 동시 유량측정이 수행되었다. 유속면적법과 ADCP법은 부적절하게 적용된 경우를 제외하면 오차는 대체로 10% 이내로 나타났다. 부자법의 경우 홍수시에만 적용되었으나 오차가 방류량 대비 20% 이상으로 다소 크게 나타났다. 연속적 방법은 기존 보의 경우 개발된 수 위-유량 관계의 이하의 저유량에 적용할 경우 오차가 다소 크게 산정되었으나 그 이외에는 대체로 10% 이내의 오차를 나타내었으며, 일부 저수위의 유속지수법을 제외하면 연속적 방법은 모두 오차가 10% 이내로 조사되었다. 향후 보다 장기간에 걸쳐 다양한 유량 범위에서의 검증이 필요하지만, 시험하천에서의 유량 측정 방법간 비교는 국내 하천에 적용할 수 있는 다양한 방법의 적용성을 평가하는데 기여할 수 있을 것으로 생각된다.향 범위는 최대 $0.07km^2$ 면적에 그 효과를 기대할 수 있을 것으로 판단되어, 남조 수화현상이 심화될 경우 인공순환에 의한 저감효과가 크지는 않을 것으로 예측된다. 조사 기간중 H호의 현존 식물플랑크톤량의 $60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략