• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.745-750
• /
• 2018

A Slot array antenna with a phase reversal device is presented for WLAN operation. The array factor and radiation characteristics of the antenna are investigated. For practical application of the radiation pattern, the phase reversal device is used. The antenna is formed on both sides of the substrate ($30mm{\times}96mm{\times}0.2mm$). The measured results show that the proposed antenna has a 10 dB return loss bandwidth of 156 MHz (2.392 - 2.548 GHz) and the measured maximum gain was 8.31 dBi.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.309-312
• /
• 2004

본 연구에서는 매미가 소형이면서도 광대역의 소리를 낼 수 있는 원리가 무엇인지를 파악하고 이중 음향 발생 장치 제작에 적용할 수 있는 요소를 도출하였다. 매미의 발음기관에서 가장 중요한 부분은 복부 공명실과 진동판이다. 복부 공명실은 위상 반전형 인클로져 시스템으로 모델링 할 수 있으며, 진동판은 돔 형태의 박판으로 볼 수 있다. 근육에서 발생된 입력 신호는 진동판의 곡면에 의해 판에 좌굴을 일으켜 높은 음압의 소리를 발생시킨다. 발생된 소리는 복부를 통해 위상이 반전되어 특정 대역이 강조된다. 진동판의 가장 큰 특징은 곡면구조에 의한 비선형적인 출력이며 이를 통하여 가진 주파수와 상이한 주파수 성분들을 효과적으로 발생시키게 된다. 이러한 구조를 음향 발생장치로 활용하기 위하여 단순한 곡면판의 기하학적 파라미터 변화에 따른 출력 변화 경향을 관찰 하였으며, 이러한 원리를 활용한 음향 발생장치를 구성하였다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.490-492
• /
• 2008

고압 전원 장치(High Voltage Power Supply)는 근래에 와서 산업전반에 응용이 매우 광범위하게 확산되고 있고 고전압 장치가 필수적으로 이용 되어야 하는 분야가 점차 확산되고 있다. 응용분야로는 신소재 개발과 플라즈마 응용을 위한 공업용과 민생용, 의료기기용, 군사용, 또한 프린터에 이르기까지 다양하게 있다. 가정이나 사무실에서 쉽게 접할 수 있는 IT장비인 프린터인 경우에도 전원 공급 장치의 측면에서는 화상형성에 있어 가장 필수적인 안정적이고 다기능을 가지는 고압 전원장치를 적용하고 있고, 수요 또한 증가하고 있다. 본 논문은 낮은 입력 DC전압에서 높은 음의 DC전압을 출력하는 높은 전환 비의 극성 반전 형 DC/DC 전력 변환 회로에 관한 것으로써, 하나의 스위치, 하나의 인덕터, 그리고 다수개의 캐패시터와 다이오드로 구성된다. 기존의 극성 반전 형 DC/DC 컨버터 회로와 비교하여, 고압 변환 트랜스포머 대신에 인덕터를 사용할 수 있어, 자기 소자의 부피 및 크기는 물론 원가저감이 가능하다. 또한 반도체 소자의 Voltage Stress가 감소된다. 제안된 회로의 원리를 분석하고, 종래의 고압 전원장치와 비교함으로써 장점을 알아본 후, 동작원리에 대한 타당성을 Simulation 및 실험을 통하여 검증한다.

• Electric Engineers Magazine
• /
• v.184 no.12
• /
• pp.21-27
• /
• 1997

전기는 생산 공급하는 전력회사와 사용, 소비하는 수용가 사이에 전기사용량을 계량하여 요금을 부과하는 장치로서 전력량계를 수용가에 부설하여 소비하는 전기에너지를 측정하고있다. 전력량계는 수요가가 부하에서 소비하는 전기에너지를 사용시간에 따라 전력을 적산하여 전기요금을 계산하는 계량장치로 기계식과 전자식으로 구분되어 있으며 이들두방식을 혼용한 반전자식이 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.293-300
• /
• 2009

The rotorcraft-based unmanned aerial vehicle(UAV) capable of performing close-range surveillance and reconnaissance has been developed. Trade studies on mission feasibility led to the adoption of a coaxial rotorcraft with twin rotors counter-rotating in one axis and driven by electric motors. A commercial off-the-shelf flight control computer(FCC) and a radio frequency modem were adopted for autonomous navigation. In order to achieve an aerial view, commercial charge-coupled device camera was also integrated into the vehicle. The performance of the completed vehicle was proved with manual flight test, and mission capability was verified through waypoint navigation flight after being equipped with FCC. This paper treats the whole process of design and system integration for development of the coaxial rotorcraft UAV.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.975-983
• /
• 2009

This paper presents the work being carried out in order to deduce hover performance of a small-scale single rotor blade as a preliminary study of a small coaxial rotor helicopter development. As an initial research, a test stand capable of measuring thrust and torque of a small-scale rotor blade in hover state was constructed and fabricated. The test stand consists of three parts; a rotating device, a load measuring sensor and a data acquisition system. Thrust and torque were measured with varying collective pitch angle at fixed RPM. Through this research, hover performance tests were conducted for a small-scale single rotor blade operating in low Reynolds number ($Re\;{\approx}3{\times}10^5$), as well as for verifying the test stand itself for acquiring hover performance.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.262-267
• /
• 2006

We proposed a PPLN fabrication setup that measures the voltage and current applied to $LiNbO_3$ in real time during application of a DC electric field. Because the duration for transferring a sufficient electron charge to $LiNbO_3$ increases, we are able to control the electron charge flow transferred to $LiNbO_3$ efficiently. We divided the domain inversion process of PPLN into 5 states: Nucleation (state 1), Spread of the domain inversion region under the electrode(state 2), Accumulation of the electron charge at the insulator/$LiNbO_3$ interface(state 3), Domain inversion under the insulator layer after breakdown(state 4), and Lowering the electric field applied to $LiNbO_3$ (state 5). We have found that the Threshold Point is essential for the domain inversion and that the domain inversion process must be stopped within state 3 for the optimum PPLN. Using these results, we could fabricate a stable and reproducible PPLN efficiently.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.560-562
• /
• 2017

This paper presents the development and test results of a test rig for confirming the hover performance of the coaxial propeller which is applied to the drone in order to carry out the mission that requires high payload such as the development of the courier drones. the performance of each propeller was measured by varying the thrust and torque according to the H/D ratio. the Thrust sensor and torque sensor were used to measure the thrust and torque generated when the propeller rotated, and a photo sensor was used to measure the rpm. it used the data acquisition system to acquire data from each sensor, and used the Labview softwaer to control data storage, monitoring and BLDC motor control. In the test, each propeller meansured the figure of mefit according to the chansge of the interval at the same rpm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.196-205
• /
• 2008

A noble polarity inversion dc/dc power conversion circuit that has the high input-output voltage conversion ration characteristics is presented for high voltage DC power supply applications. The proposed circuit features the reduced voltage stresses of the component compared to those of the conventional ones. The operational principles of the proposed circuit is analyzed and comparative features are presented. The simulation results and experimental results are presented to verify the validity of the proposed circuit.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.169-175
• /
• 2002

The purpose of this study is to verify the usefulness of X-ray simulator which uses a visible light source for further study. We developed a small experimental equipment which is composed of three main components - source, localizer and detector. Cartesian coordinate was set in 3D space, and the position of target was assumed the origin of the coordinate. The light from the source passes directly through the target, and projection image is formed on the screen, which can be taken with the digital camera. Since projection images were acquired behind the screen, they were flipped over right and left. By examining the characters of visual light source and equipments, it could be concluded that developed system was useful for experimental purpose.