• 한국해양공학회지
• /
• 제2권1호
• /
• pp.106-115
• /
• 1988

반잠수식 시추선의 설계에 있어서 구조의 피로수명을 정확하게 추정하는 것은 매우 중요하며, 또한 어려운 일이다. 본 논문에서는 이미 실용화된 Aker H-3모델에 대하여 Palmgren-Miner 가정에 의하여 시추선의 hot-point인 수평 및 수직 K-brace 멤버에 대하여 피로수명을 로이드 선급의 커브에 따라 계산한 결과 북해의 해성환경 조건에서는 16년 동안 계속 작업을 할 수 있다는 결론을 얻었으나 응력 집중계수 (SCF)를 선정하는데 불확실성으로 인하여 사용하는데 주위를 요한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.399-401
• /
• 2011

반잠수식 시추선의 주선체(lower hull)를 세 가지 타입으로 설계하여 주선체에 대한 유체정역학적 계산, 조종성능 및 내항성능 계산 그리고 이론계산을 수행하여 wave distribution과 height도 각각 비교 분석하였다. 주선체의 Convention type, Bulbous bow type, 그리고 Ice breaking type 중 Ice breaking type 선형의 성능이 가장 우수하였다. 다음으로는 반잠수식 시추선의 모든 조건(작업, 이동, 생존)에서 주기둥(column) 또는 주선체(Lower)가 손상되어 부력을 상실했을 시 전복 되지 않도록 고안된 예비부력 기능과 기름 유출 사고시 기름을 회수 할 수 있는 기능을 갖춘 유회수 겸용 예비부력 탱크를 개발하였다.

• 한국해양공학회지
• /
• 제2권1호
• /
• pp.59-70
• /
• 1988

This paper presents the results of motion tests of a moored semi-submersible platform in regular waves. To investigate the effects of mooring system on the motion characteristics, the tests were performed under the various mooring conditions in regular head and beam waves. Two types of mooring system were employed: one is composed of soft springs and the other is of chains. In the case of chains the pretensions were varied to investigate the dynamic effects of mooring forces as well as the motion responses of the semi-submersible. The motion responses and mooring tensions were measured and analyzed by the double amplitude method. The measured motion responses were also compared with the results of calculation from three-dimensional potential theory. Finally, the dynamic behaviors of mooring chains were studied.

• 한국해양공학회지
• /
• 제32권3호
• /
• pp.177-183
• /
• 2018

This study simulated ice load and the motion response of a moored semi-submersible rig in pack-ice conditions using a finite element method. Ice flows of random size and shape were modeled, and interactions for ice-sea, ice-structure, ice-ice were simulated using a simplified method. Parameters for the simplified method such as drag force coefficient and the pressure-penetration relation were obtained based on the result of detailed analysis using the coupled Eulerian-Lagrangian method. The mooring lines were modeled by spring elements based on their stiffness. As a result of the simulation over 1,400 seconds, the force and motion response of the rig were obtained and validated using discrete elements and compared with the results found by the Krylov State Research Centre.

• 한국해양공학회지
• /
• 제2권1호
• /
• pp.90-94
• /
• 1988

본 논문은 반 잠수식 시추선과 선박과의 충돌해석에의 정적 압축법의 응용에 대해 다루었다. 선박이 시추선의 취약 부재에 충돌하는 경우를 가정하였으며 이 취약한 부재의 충돌에너지 흡수능력을 상세 해석 없이 추출하는 방법으로, 관련된 구조물 전체 강성 매트릭스를 부재의 양단에 정적 압축을 시켜 양단 유연도를 추출한 뒤 이 유연도를 양단에 가진 원통형 부재를 해석함으로써 외력-변형 관계를 얻을수 있었다. 충돌에너지 양은 외력-변형 선도를 적분함으로써 얻을 수 있다. 새로운 방법에 의한 결과를 3차원 수치해석 방법과 강체 프라스틱 방법에 의해서 얻어진 결과와 상호 비교하였으며, 이 새로운 방법이 해양구조물 충돌해석이 매우 효과적으로 응용될 수 있음을 알게 되었다.

• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.129-137
• /
• 2013

Each owner or operator of offshore products uses a maintenance management system like CMMS(Computerized Maintenance Management System) in order to manage their assets effectively and efficiently for a long time. But most of maintenance management systems have been focused on machinery items, not on 'Hull' until now. On the other hand, classifications like ABS, DNV, GL are having a sale on hull inspection and maintenance system for ships and an interest in hull maintenance system is increasing because of the application of EDD(Extended Dry Docking). This paper discusses the concept, inspection process and the practical application of Hull maintenance for Semi-submersible drilling rig to extend the service life and run a stable operation.

• 대한조선학회지
• /
• 제26권2호
• /
• pp.49-63
• /
• 1989

파랑표류력은 크기에 있어서는 2차항(2nd-order)의 힘으로, 파도의 주기로 나타나는 1차항(1st-order)의 파랑강제력에 비해 미미하나, 부유체 자체의 복원력이 없는 수평방향으로 작용하므로 부유체에 대변위 표류운동을 유발한다. 특히 장주기 표류력은 계류시스템에 장주기 대변위 공진응답을 야기시킬 수 있으므로 계류시스템의 설계 및 운용에 고려되어야 할 중요한 요소이다. 본 연구에서는 이론적 연구로서 개량된 Green 적분방정식을 이용하여 3차원 특이점을 분포하는 방법으로 near field법을 택하여 장주기 파랑표류력을 계산하였으며 계산결과는 Pinkster 및 Standing의 결과와 비교하였다. 비선형파의 산란효과 고려는 Pinkster의 근사방법을 따랐다. 실험적 연구로서 반잠수식 시추선의 1/60 모형에 대해 규칙파 및 불규칙파중 표류력계측시험을 수행하였으며 실험결과는 계산치와 비교되었다. 끝으로 계측시험에 있어 계류스프링의 영향 및 장주기 표류력 계측에 있어서 실험상 문제점을 논하였다.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.27-36
• /
• 1988

For the purposes of drilling oil field and extracting oil deep water in more rough weather, the size of drilling rigs must be estimated. In this paper, the three dimensional source distribution method is used and we assume 10 deg. heeling and trimming condition of the drilling rig(SR-192). Also, the effects of the hydrodynamic forces which include the drift forces for field method, and the motion responses are studied with changing the incident wave direction in the assumed inclining condition. The theory and numerical codes used in this thesis appeared to be very useful for the preliminary design of drilling rigs.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.86-92
• /
• 2012

An exploration well is drilled where oil or gas potential is shown by a seismic survey and interpretation. With the advance of drilling technology, most of the easily accessible oil had been developed by the end of the 20th century. To satisfy the ever increasing demand for oil, and bolstered by high oil prices, the major oil companies started to drill in deep water, which requires a deep offshore drilling unit. Offshore drilling units are generally classified by their maximum operating water depth. Many semi-submersible rigs have been purpose-designed for the drilling industry as the allowable drilling water depth has become deeper by the developed technics since the first semi-submersible was launched in 1963. Semi-submersible rigs are commonly used for shallow to deep water up to 3,000 m. Drilling equipment such as a top drive, blowout preventer, drawworks and power system, mud circulation system, and subsea wellhead system are explained to help with an understanding of offshore drilling procedures in the oil and gas fields. The objective of this paper is to introduce the main components of a semi-submersible rig and, by doing so, to raise the awareness of offshore drilling, which accounts for over 30% of the total oil production and will continue to increase.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.32-37
• /
• 2017

Due to the nature of semi-submergible drilling rig, various equipments are arranged in a limited space, and therefore the many types of outfitting holes passing through the hull structure are densely arranged and that is required the detailed structural strength evaluation in terms of ULS and FLS by class or client. Particularly, semi-submergible drilling rig has a variety of global load which affects the structure strength around holes compared to general commercial ship, and its response of stress is also complicated, so it is difficult to carry out the prediction design of structural strength evaluation and reinforcement. In this regard, this paper presents a case study on the evaluation of structural strength for the various holes and large openings of semi-submergible drilling rig conducted by our company, as well as an established hole verification procedure.