• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.227-228
• /
• 2009

This study proceeded to find the optimum mixing rate of a high strength concrete with 80MPa of the contribution and composite effect on the resistance to fire of the fibers were analyzed and the corresponding results were exploited to derive practical mix proportions. Also proceeded to propriety examination of limit value for optimum operating condition.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.4
• /
• pp.363-368
• /
• 2010

The overall indicator of microbial activity in the fermentation-extinction reaction of food waste by using bio wood-chips were investigated by considering adenosine tri-phosphate(ATP). Degradation rate of organic compounds, which was represented by chemical oxygen demand(COD) and total nitrogen(TN), was increased with the concentration of adenosine tri-phosphate during fermentation-extinction reaction of food waste by using bio-wood chips. With this view, the ATP would be one of the overall evaluation indicator of organic degradation in the species of bio-wood chip for the fermentation-extinction of food waste.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.255-258
• /
• 2002

폴리에스테르계 고분자를 용융온도 이상에서 가공하면 두 고분자간의 화학적인 상호교환반응이 일어나고, 이러한 상호에스테르 교환반응은 이들의 공중합체를 생성시켜 블렌드계의 상용성을 증대시킬 수 있으며, 구조와 물리적 성질을 상당한 수준까지 변화시킬 수 있기 때문에 용융가공시 중요한 인자가 되고 있다. 일반적으로 상호에스테르 교환반응에 의해 공중합체가 형성될 때 반응초기에는 블록 공중합체가 형성되며, 반응이 진행될수록 랜덤 공중합체가 형성 [1] 되며, 블렌딩 시간, 온도 그리고 조성비에 따라 상호교환방응 정도가 달라지게 된다[2-3]. (중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.05a
• /
• pp.121-124
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.21-21
• /
• 1999

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2000.11a
• /
• pp.130-130
• /
• 2000

• 한국전기화학회:학술대회논문집
• /
• 2001.10a
• /
• pp.29-29
• /
• 2001

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.3
• /
• pp.251-258
• /
• 2009

At the stage conceptual design, combat vehicle is classified into three general categories of fire power, mobility and physical properties of system. The present research is restricted to fire power and its optimization. At the stage of conceptual designing of system, it is appropriate to consider major variables affecting fire power - including the weight of bullet, which exerts a direct influence on destroying effect, maximum range which takes long range firing in consideration. To estimate the maximum firing range, a simple interior ballistic and an exterior ballistic model were built by using the lumped parameter method, Le Duc method and point mass trajectory model. Design of experiment and regression analysis was used to derive simulations of fire power. Finally, response surface models were built and design variables were analyzed.

• Journal of Gastric Cancer
• /
• v.2 no.2
• /
• pp.63-68
• /
• 2002

위의 parietal cell 혹은 대식세포와 유사한 세포 내부에서 H. pylori가 발견된다는 보고가 있기는 하나 일반적으로 H. pylori는 Shigella와 같은 침습성 세균은 아닌 것으로 알려져 있다. 그럼에도 불구하고 H. pylori에 감염된 위점막에는 많은 수의 호중구를 위시한 염증세포의 침윤이 관찰되는데 H. pylori가 위상피세포에 부착할 경우 위상피세포를 자극하여 interleukin-8을 위시한 cytokine을 발현케하고 이에 의하여 호중구 등의 염증세포가 몰려들게 된다. 한편 고유층에 몰려든 호중구에서는 다시 interleukin-8을 위시한 일련의 호중구 활성화 chemokine을 분비하여 염증반응을 증폭해 나갈 것이다. 호중구에서 발현되는 myeloperxidase나 활성산소 등도 위점막의 조직 손상에 기여할 것이다. 위상피세포를 덮고 있는 점액층은 위상피세포를 보호한다고 알려져 있으나 H. pylori 감염의 경우 점액층에 의하여 H. pylori의 운동성이 증가하고 이것이 위상피세포로부터의 cytokine 발현을 자극하여 염증반응을 증폭하는 데 관여할 가능성도 있다. H. pylori는 위상피세포에 대하여 apoptosis를 유도함과 동시에 고유층에 몰려든 호중구에 대하여는 apoptosis를 억제케하여 궁극적으로 염증반응을 증폭 및 지속시켜 나가는 쪽으로 작용한다. 한편 H. pylori는 위상피세로로부터 COX-2의 발현을 증가시키는데 이는 위상피세포의 APOPTOSIS를 억제하는 방향으로 작용한다. 이외에 H. pylori의 urease에 의하여 발생한 암모니아나 H. pylori 자신이 분비하는 세포독소가 세포 손상을 유발할 가능성도 있다. 상술한 여러 독성 인자들 중 어느 하나가 단독으로 작용하기보다는 여러 인자가 같이 동시에 또는 시차를 두고 작용할 가능성이 많다고 생각된다.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.147-152
• /
• 2020

In this study, we dedicated to optimize the process for a reactive diluent for epoxy resin of improved chemical resistance by using cardanol, a component of natural oil of cashew nut shell liquid (CNSL). The central composite design (CCD) model of response surface methodology (RSM) was used for the optimization. The quantitative factors for CCD-RSM were the cardanol/ECH mole ratio, reaction time, and reaction temperature. The yield, epoxy equivalent, and viscosity were selected as response values. Basic experiments were performed to design the reaction surface analysis. The ranges of quantitative factors were determined as 2~4, 4~8 h, and 100~140 ℃ for the cardanol/ECH reaction mole ratio, reaction time, and reaction temperature, respectively. From the result of CCD-RSM, the optimum conditions were determined as 3.33, 6.18 h, and 120 ℃ for the cardanol/ECH reaction mole ratio, reaction time, and reaction temperature, respectively. At these conditions, the yield, epoxy equivalence, and viscosity were estimated as 100%, 429.89 g/eq., and 41.65 cP, respectively. In addition, the experimental results show that the error rate was less than 0.3%, demonstrating the validity of optimization.