• Resources Recycling
• /
• v.6 no.2
• /
• pp.22-28
• /
• 1997

In recent yean thc problem of wastc plastics arc greatly incrcascd with ihe result uf lndushial growth. As a rcsult the amount of wastc plaslics in domestic area is appraxhnately 2,300,000 t<~nin 1996 base and contmuously increasing more than 12% cvcry ycar. Thc disposal way of these waste plastics arc dlLl malnly rely~ng on landill1 or partially incinuralion So that it hss become a senous social problem due to the second envirnmentd pollution. The tcchnologics iar prducing oil from the waste plastics have hccn dcvelopcd far along pennd and currently some of them are in a commercialiration stage Pyrolysis process in one of the major process m heating waslc plaslics bul still has some restlichons for the cammcrc~dizatian duc lo 11s emnom~cal problems assaciated with a systcmiltlc lecd collcctionidispnsJ ways. Cansldenng cnvaomcnld problems, thc inclease m the charge for waste matcds trcatmcnt and thc lmlitarion ni disposal area, it is inteicstcd that the wastc plastics treabncnt by pyrolysn. which would be the safest and the most eilic~ent process for cnnvcrting fecd wastc to rc-usablc rcsourccs. would he predomhant m ihe near h~lurc Thc shldy aims inr the development of haslc ted~nolagy for scaling up to a com~nercial sire through pyrolys~s process which is cnnduclcd under the absence of air. Furthern~orc the waste plastics can be recycled as iual gas or oil wilhout harmful effects in enviroment, The waste w e d plastics arc pyrolyzed in (he fluidized bcd rcaclor under continuous way and thc ail ylcld gives approx~marcly 47 4%.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.543-551
• /
• 2015

Quick-hardening track (QHT) is a construction method which is used to change from old ballast track to concrete track. Sufficient time for construction is important, as the construction should be done during operational breaks at night. Most of the time is spent on exchanging the ballast layer. If it is possible to apply the ballast non-exchange type of quick-hardening track, it would be more effective to reduce the construction time and costs. In this paper, pouring materials with high permeability are suggested and a construction method involving a layer separation pouring process considering the void condition is introduced in order to develop ballast non-exchange type of QHT. The separate pouring method can secure the required strength because optimized materials are poured into the upper layer and the lower layer for each void ratio condition. To ensure this process, a rheology analysis was conducted on the design of the pouring materials according to aggregate size, the aggregate distribution, the void ratio, the void size, the tortuosity and the permeability. A polymer series was used as the pouring material of the lower layer to secure the void filling capacity and for adhesion to the fine-grained layer. In addition, magnesium-phosphate ceramic (MPC) was used as the pouring material of the upper layer to secure the void-filling capacity and for adhesion of the coarse-grained layer. As a result of a mechanics test of the materials, satisfactory performance corresponding to existing quick-hardening track was noted.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.2
• /
• pp.37-44
• /
• 2019

The compressive strength of the soil stabilizer in the deep mixing method (DMM) depends on kinds of soil, particle size distribution, and water content. Because of this, Laboratory test has to perform to estimate the unit weight of binder to confirm the satisfaction of the design strength. In this study, uniaxial compression strength was measured by mixing the soil stabilizers developed in the previous study with clay in Busan, Yeosu, and Incheon area. And the strength enhancement effect was evaluated comparing with blast furnace slag cement (BFSC). Also, the relationship between the unit content of binder and uniaxial compressive strength was investigated in order to easily calculate the unit weight of binder required to ensure the stability of the ground at the field. As the results of the analysis, the relationship between the unit content of binder and the uniaxial compressive strength are ${\gamma}_B=(108.93+0.0284q_u){\pm}35$ when W/B is 70%, and ${\gamma}_B=(122.93+0.0270q_u){\pm}40$ when W/B is 80%.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.28 no.2
• /
• pp.56-63
• /
• 2017

This study was conducted to determine the effects of supplementary levels of dietary betaine and energy on nutrient digestibility and physiological responses in growing pigs exposed to heat stress. A total of 12 barrows ($L{\times}Y{\times}D$; initial BW, $67.1{\pm}0.98kg$) were allocated into individual metabolic crates. Experimental design was a $4{\times}4$ Latin square with dietary energy and betaine levels (3,300 and 3,400 kcal/kg; 0 and 0.5%, respectively) and the experimental period (n=4). Feeding trial was performed during summer season (July and August). Digestibility of crude fat was higher (p<0.01) in the ME 3,400 kcal/kg than the ME 3,300 kcal/kg, but did not differ by betaine (p>0.05). Blood corpuscles and biochemical components were not influenced by dietary energy and betaine levels (p>0.05). Serum IgG was greater (p<0.05) in the ME 3,400 kcal/kg than the ME 3,300 kcal/kg, but cortisol was not differ among the treatment groups (p>0.05). In conclusion, our results showed positive effects by energy levels rather than betaine. Thus, further study need investigation of effects of high energy level in the pigs exposed to heat stress.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2021

In this study, a study related to laboratory and pilot test were performed to use an environmental soil stabilizer developed to induce a hardening reaction similar to that of Ordinary Portland Cement (OPC) by using industrial by-products of blast furnace slag and the combustion ash of a circulating fluidized bed boiler as the main material. For this, specimens were prepared using liquid A of sodium silicate and silica sol, and liquid B of an environmental soil stabilizer (or OPC), and laboratory tests were performed to analyze the strength and environmental characteristics. And pilot test was performed on the aging reservoir, field permeability test and electrical resistivity survey were performed in the field to analyze the applicability. As a result of the laboratory test, the homo-gel compressive strength of the chemical injection material using the environmental soil stabilizer as liquid B was about 2.88 to 3.23 times greater than that of OPC. In addition, the elution amount of most heavy metals was lower than that of OPC, and the survival rate in the fish, acute toxicity test was 100%. Therefore, when judged based on the results of the laboratory test, it was analyzed to be superior to OPC in terms of strength and environment. In the results of the pilot test in the aging reservoir, when the environmental soil stabilizer was reinforced with liquid B of the chemical injection material, the coefficient of permeability in the aging reservoir decreased to 1/50 level. In addition, as a result of the electrical resistivity survey, it was analyzed that the electrical resistivity inside the aging reservoir increased as time passed, the saturation zone disappeared, and the overall reinforcement.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.2
• /
• pp.35-43
• /
• 2011

Confined aquifer, which is separated with upper clayey or silty materials, is partially distributed at the depths of the sediments in Ddan-sum area on the lower Nakdong river. Measurements of groundwater levels at 13 sites explain that groundwater flow shows seasonally various due to seasonal rainfall and agricultural water use. From 9 long-term monitoring data of groundwater levels at 7 sites, 3 types of groundwater levels time series can be classified using principal component analysis. The first type is seen in the center of Ddan-sum and has a round-shape graph due to a weak response to stream water levels. The second type exists in the outer part of Ddan-sum and shows sharply peak-shape graph due to a rapid and strong response to stream water levels and rainfall. The last type, which is seen in a deep layer, has a periodicity by tital effect. From geochemical analysis at each monitoring sites, [$Ca-HCO_3$] type happens in the center of Ddan-sum far from Nakdong river, and [$Na-HCO_3$] and [$Ca-SO_4(Cl)$] types exist in the outer of Ddan-sum affected by river quality.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.165-175
• /
• 2022

Earthquakes have occurred owing to movements on a fault since several billion years ago. Research on the relationship between earthquakes and groundwater began in the 1960s in the United States, but related works, including hydrogeochemistry research, only began in the 2010s in South Korea. In this study, domestic studies on the relationship between earthquakes and groundwater until 2021 were collected from the Web of Science and characterized by subject area (groundwater level, hydrogeochemistry, combination of the two, and others). The results showed that the number of published articles per year was positively correlated with the 2011 Tohoku earthquake, 2016 Gyeongju earthquake, and 2017 Pohang earthquake, with the maximum numbers observed in 2011, 2018, 2019, and 2020. Most studies on the relationship between earthquakes and groundwater level addressed groundwater level fluctuations in the duration of the subject earthquake, with little consideration of the precursors. Groundwater level monitoring data, as well as hydrogeochemical information and microbial communities, may contribute to a more detailed understanding of groundwater flow and chemical reactions in bedrock caused by earthquakes. Therefore, the establishment of a national groundwater monitoring network for seismic monitoring and prediction is required.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.300-307
• /
• 2022

Time-resolved serial femtosecond crystallography (TR-SFX) is a powerful technique for determining temporal variations in the structural properties of biomacromolecules on ultra-short time scales without causing structure damage by employing femtosecond X-ray laser pulses generated by an X-ray free electron laser (XFEL). The mixing rate of reactants and biomolecule samples, as well as the hit rate between crystal samples and x-ray pulses, are critical factors determining TR-SFX performance, such as accurate image acquisition and efficient sample consumption. We here develop two distinct sample delivery systems that enable ultra-fast mixing and on-demand droplet injecting via pneumatic application with a square pulse signal. The first strategy relies on inertial mixing, which is caused by the high-speed collision and subsequent coalescence of droplets ejected through a double nozzle, while the second relies on on-demand pneumatic jetting embedded with a 3D-printed micromixer. First, the colliding behaviors of the droplets ejected through the double nozzle, as well as the inertial mixing within the coalesced droplets, are investigated experimentally and numerically. The mixing performance of the pneumatic jetting system with an integrated micromixer is then evaluated by using similar approaches. The sample delivery system devised in this work is very valuable for three-dimensional biomolecular structure analysis, which is critical for elucidating the mechanisms by which certain proteins cause disease, as well as searching for antibody drugs and new drug candidates.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.610-619
• /
• 2022

Hydrogen is emerging as an alternative fuel for eco-friendly ships because it reacts with oxygen to produce electrical energy and only water as a by-product. However, unlike regular fossil fuels, hydrogen has a material with a high risk of explosion due to its low ignition point and high flammability range. In order to safely use hydrogen in ships, it is an essential task to study the flow characteristics of hydrogen leakage and diffusion need to be studied. In this study, a numerical analysis was performed on the effect of leakage, ventilation, etc. on ventilation performance when hydrogen leaks in an enclosed space such as inside a ship. ANSYS CFX ver 18.1, a commercial CFD software, was used for numerical analysis. The leakage rate was changed to 1 q, 2 q, and 3 q at 1 q = 1 g/s, the ventilation rate was changed to 1 Q, 2 Q and 3 Q at 1 Q = 0.91 m/s, and the ventilation method was changed to type I, type II, type III to analyze the ventilation performance was analyzed. As the amount of leakage increased from 1 q to 3 q, the HMF in the storage room was about 2.4 to 3.0 times higher. Furthermore, the amount of ventilation to reduce the risk of explosion should be at least 2 Q, and it was established that type III was the most suitable method for the formation of negative pressure inside the hydrogen tank storage room.

• 지역과문화
• /
• v.7 no.1
• /
• pp.99-126
• /
• 2020

This study aimed to investigate the effects of multicultural complexes on activating local culture. Prior studies that discuss activating local culture through multicultural complexes focus on literature reviews or quantitative research methods, which do not incorporate the detailed and practical opinions of the users of the location. Therefore, this study collected detailed information through in-depth interviews with users, and investigated the future development methods of multicultural complexes based on the obtained information. It focused on the Asia Culture Center (ACC) in Gwangju, which is considered a prime example of a multicultural complex, and conducted in-depth interviews with citizens who have lived in Gwangju for at least five years as well as visited the ACC to investigate the research question from a detailed perspective. The results revealed that although the citizens of Gwangju have a positive perception of the functions of ACC as a cultural space representing the city that activates the local culture, they perceive it as partially insufficient to be considered a multicultural complex. Major findings included the following: the contents of the ACC do not have a mass appeal, its inflexible hours of operation inconvenience visitors, and the contents available for visitors lack in quantity and quality. Therefore, in order for the ACC to appeal as a successful multicultural complex, it is necessary to cooperate with the members of the community to investigate their needs with respect to the contents and location, and prepare strategic plans to satisfy those needs.