• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.459-459
• /
• 2007

VHF ICP (Very High Frequency Inductively Coupled Plasma) 반응기에서 반응기 압력, 수증기 유량, 플라즈마 출력, 반응기온도 등의 공정변수에 따른 수증기 분해특성과 수소생성거동을 실험하였다. 플라즈마 분해 특성은 OES(Optical Emission Spectroscopy)를 사용하여 분석하였으며, QMS(Quadrapole Mass Spectroscopy)를 이용하여 배기가스 성분을 분석하여, 수증기 분해거동 및 수소생성 효율을 조사하였다. 본 연구실에서 설계한 초고주파 유도결합 플라즈마는 고밀도 플라즈마 생성과 낮은 압력에서도 안정된 플라즈마 발생 특징을 나타내었다. 플라즈마 출력의 증가에 따른 수증기의 분해와 수소생성 거동은 개시영역, 선형증가영역, 포화영역의 세 영역으로 구분되는 특징을 나타내었다. 유량 및 압력의 증가에 따라 포화에 필요한 플라즈마의 출력이 증가되는 경향을 나타내었다. 본 실험의 온도범위에서는 온도 증가에 따른 수증기 분해 및 수소생성 증가효과는 플라즈마 출력의 영향에 비하여 매우 미미한 정도로 플라즈마의 높은 에너지 전달효과를 확인할 수 있었다. 따라서, 낮은 반응기 온도에서도, 유량 및 압력에 따른 포화 플라즈마조건을 설정할 경우, 높은 에너지 효율의 수소 제조가 가능함을 알 수 있었으며, 물분해 플라즈마를 이용한 저온 산화물 박막증착에의 적용도 기대된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.10-15
• /
• 2013

For design optimization, engineers should require the accurate information of design space and then explore the design space and carry out optimization. Recently, the total design framework, based on design of experiments and optimization, is widely used in industry areas to explore the design space above all. For optimizing turbofan engine design point, the response surface model is constructed by using the 7 level orthogonal array which satisfies the statistical uniformity and orthogonality and gets the dense design space information. The multi-objective genetic algorithm is used to find the optimal solution within the given constraints for finding global optimal one in response surface model. The optimal solution from response surface model is verified with GasTurb simulation result.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.121-127
• /
• 2004

The instantaneous removal of ethylene glycol is very important fur obtaining high molecular weight polymer because of the reversibility of the polycondensation reaction of poly(ethylene naphthalate)(PEN). In this study, we investigated the mass transfer phenomena in the thin film of PEN oligomer where the polycondensation reaction took place at 280$^{\circ}C$ and under 0.1mmHg. In case of less than 0.025cm film thickness the mass transfer resistance through the thin film of the polymer melt was not so high that the overall reaction rate was governed only by the polycondenstion reaction. Both the mass transfer model and the diffusion model predicted the experimenatal data well but the diffusion model showed faster reaction rate in the low molecular weight range than the mass transfer model . It was estimated from the two models that the diffusivity was 4.7${\times}$10$\^$-6/$\textrm{cm}^2$/sec and the mass transfer coefficient was 1.4 ${\times}$10$\^$-4/cm/sec both of which were smaller than In case of poly(ethylene terephthalate).

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.181-192
• /
• 2019

The purpose of this study is to look at the fun that high school students from blind schools feel in sports programs. A questionnaire was used to collect data from 10 out of 12 blind schools nationwide, including 122 male and 102 female students. Research tools are open questionnaires and questions are as follows. - Questionnaire: "Write down three of the most interesting things about sports programs." The data analysis was done with frequency analysis and the following conclusions were drawn. First, male high school students at blind schools are able to build up their physical strength in the area of competent factors (control-self) (23, 21.5%), in the area of competent factors (7, 77.8%) and in the area of motion-related factors (competition) (24, 15.1%), and in the area of non-execution factors (26, 37.7%), Second, high school girls with visual impairments did not respond in the areas of proficiency (control-self) because of stress release (25, 26.6%), in the areas of control-tain), in the areas of movement (competition) because they were able to do various exercises (22, 15.7%), and in the areas of non-watering (environmental) (18, 37.5%). Third, in the sports program comparative analysis of high school students between genders of blind schools, boys are interested in health and physical fitness in the field of competent factors (control-self) and girls are considered to be a means of relieving stress. In the field of competent factors (control-others), boys and girls can react to a variety of sports opportunities. In the future, by studying the fun of students in the physical education program through research to find out more fun in the school physical education program, we will explore practical ways to maximize student participation and increase motivation level The educational aspect of the process, that is, the educational value provided by the physical education, should be composed of content that can change the thinking and behavior of the teacher and the student so that the program contents and operation method.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.9-17
• /
• 1997

We studied on the decoloring efficiency of a dying and finishing industrial wastewater containing reactive dyes in the ozone treatment system. The wastewater containing reactive dyes improved the decolorization by the ozone oxidation. In order to determine the optical conditions for ozonation, various operation factors such as initial wastewater concentrations, pH, temperature, and ozone dose were evaluated. Ozone utilization rate was improved in general with the increase of initial concentration of wastewater. And the decolorization speed or reactive dyes was more decreased in deep color of blue series than in light color such as yellow series. The colorization of wastewater containing reactive dyes was changed step through midle color depending upon increasing of ozone treated time. The efficiency of decolorization for wastewater was improved with the pH increased and the temperature of ozone treatment system decreased.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.47-47
• /
• 2018

단일벽 탄소나노튜브 (Single-walled carbon nanotubes, SWNTs)는 우수한 물리적 화학적 특성을 갖고 있어 나노전자소자, 투명전도막, 에너지소자, 센서 등 다양한 분야로의 응용이 기대되고 있다. 열화학기상증착(Thermal chemical vapor deposition, TCVD)법은 SWNTs의 합성 공정이 간단하고 공정변수의 제어가 용이하다는 장점이 있어 SWNT 합성 연구에 가장 널리 사용되어 왔다. 일반적으로 금속 촉매의 박막이 증착된 합성 기판은 온도가 가장 높고 비교적 균일성이 보장되는 TCVD 반응기의 중심부에 위치시키고 공정변수를 변화해가며 연구를 진행해 왔다. 본 실험실에서는 수평형 반응기 전역에 합성 기판을 설치하여 SWNTs를 합성한 결과, 반응기의 중심보다 뒤의 영역에서 SWNTs의 합성 수율이 상당히 증가하는 것을 초기실험을 통해 확인하였다. 본 연구에서는 SWNTs 합성 시 가스 유량과 합성 온도를 변화시켰을 때 기판 위치에 따른 SWNTs의 수율 및 물성변화를 구체적으로 조사하였다. 합성가스와 촉매로는 메탄가스와 철 박막을 사용하였으며, 합성 수율의 변화는 고분해능 주사전자현미경을 이용하여 관찰하였다. 그리고 합성된 SWNTs의 형태 및 결정성은 라만분광법과 원자간힘현미경을 이용하여 평가하였다. 결과적으로, 진행하였던 모든 합성 조건에서 반응기 중심보다 뒤의 영역에서 더 고수율의 SWNTs가 합성되었으며, 최적 합성 조건의 SWNTs 면밀도는 99% 이상이었다. 본 연구의 결과는 CVD 공정을 이용하는 다양한 저차원 나노 소재의 합성에도 적용될 수 있을 것으로 사료되며, 추후 이에 대한 연구가 필요하다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.59-66
• /
• 1998

The combustion instability analysis of solid propellants is generally done by the simplified governing equations for chemically inert condensed phase region with QSHOD assumption. Since the gas phase and surface reaction layer can be more rapidly relaxed to the external perturbations than the condensed phase, these regions are treated as quasi-steady manner in the analysis. In this paper, the classical ZN(Zeldovic-Novozhilov)approach was re-examined with the presence of radiation augmented burning enhancement in the combustion. Also, the surface reaction was assumed to partially absorb the incident radiant heat fluxes and pass the remaining to the chemically inert condensed phase. As a result of the analysis, the burning rate response function was obtained which consists of a pressure response function and a radiation response function. The response function was shown to be able to predict the results of T-burner tests.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.117-128
• /
• 2016

Chemical reaction tests were performed to assess the properties of hardened specimens of cement pastes (KS-1 Portland and Class G) exposed to supercritical CO₂ for 1, 10, and 100 days. After exposure, the samples' measured permeability and strength were compared with values measured for pristine samples. The pristine cements had permeabilities of 0.009~0.025 mD, which increased by one order of magnitude after 100 days of exposure (to 0.11~0.29 mD). The enhancement of permeability is attributed to the stress release experienced by the samples after removal from the pressure vessel after exposure. Despite its enhancement, the measured permeability mostly remained lower than the API (American Petroleum Institute) recommended maximum value of 0.2 mD. The degradation of the cement samples due to exposure to supercritical CO₂ led to a layer of altered material advancing inwards from the sample edges. The Vickers hardness in the altered zone was much higher than that in the unaltered zone, possibly owing to the increase in density and the decrease in porosity due to the carbonation that occurred in the altered zone. Hardness close to the edge within the altered zone was found to have decreased significantly, which is attributed to the conversion of C-S-H into less-strong amorphous silica.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.83-83
• /
• 2015

터보 분자 펌프는 수 만 rpm의 고속으로 회전하여 분자 유동 영역에서 효율적으로 기체를 배기하는 특성을 가지고 있지만 실제 플라즈마 공정에서는 챔버의 압력이 수 mTorr이상이므로 점성 유동 영역이나 전이 유동 영역에 해당한다. 따라서 터보 분자 펌프의 rotor, blade, stator등의 설계가 점성 유동 영역에서 반응성 가스 및 플라즈마 특성에 의해서 어떤 영향을 받는지 수치 모델을 통하여 해석을 시도하였다.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.122-129
• /
• 2002

The analytical models and algorithm of the SPIKE code, which has been developed by KAERI's KALIMER team to investigate the sodium-water reaction phenomena in the liquid metal reactor, were introduced with its verification calculation results. The sodium water reaction of KALIMER IHTS was evaluated. Early stage of the sodium-water reaction consists of wave and mass transfer regimes. The pressure variations were independent of specific design features in the wave transfer regime. However in the mass transfer regime, the pressure variations were strongly dependent on cover gas volume and rupture disk set pressure. The early stage SWR analysis showed that the KALIMER IHTS with an appropriate cover gas volume and rupture disk set pressure had enough margin to its design pressure.