• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.455-460
• /
• 2014

The system performance is analized for the optimal design of the transmission links with dispersion management and optical phase conjugation for compensating for the optical signal distortion due to the group velocity dispersion and optical nonlinear Kerr effects in the long-haul optical transmission system. That is, the effect of the relation of the residual dispersion in both half transmission sections with respect with optical phase conjugator (OPC) on the net residual dispersion (NRD) is assessed. It is conformed that the best compensation is obtained in NRD of 10 ps/nm, which is only controlled by the difference of the residual dispersion between each half transmission sections.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.69-72
• /
• 2013

In long-range ultrasonic testing, a phased array probe composed of multiple identical transducers with an uniform interval of one quarter wavelength is usually used for the transmission or reception directivity control. This paper shows that the propagation directions of individual echoes can be identified in real time by displaying the inputs of a process for summing the constitution reception signals after compensating the phase difference due to the transducer interval, together with the output of the process. A constructive interference of the constitution echoes indicates a forward direction echo propagating along an intended direction while a destructive interference implies a reverse direction echo propagating along the direction opposite to the intended one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.4
• /
• pp.285-301
• /
• 1988

The symbol error rate equations of multi-level quadrature PRS(QPRS) system have been derived in the individual and composite environment of Gaussian/impulsive noise, cochannel CW interference, carrier offset, phase jitter and fading. And using the derived error rate equations, the probability of error has been evaluated and shown in graphs as functions of carrier to noise power ratio, carrier to interference power ratio, phase error, impulsive index, the ration of Gaussian noise to impulsive noise power component, signal to noise power ration in phase locked loop(PLL), and fading figures. The rseults show that the error rate performances are generally more more degraded by impulsive noise than by Gaussian noise. But on the contrary the erors occurred more frequently by Gaussian noise than impulsive noise in a fading environment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.4
• /
• pp.203-210
• /
• 2020

Spatial variation of diffracting wave amplitudes along a semi-infinite breakwater is investigated using the analytical solution of Penney and Price (1952) for wave diffraction. On the front side of the breakwater, the fluctuation of wave amplitudes due to diffracting waves would cause a wave force greater than that of superposed incident and reflected waves. The diffracting wave phase varies in circular shape from the breakwater tip of (x, y) = (0, 0) whereas the incident and reflected wave phases vary in planar shape. So, the total wave amplitude of the incident (or reflected) waves and the diffracting waves would fluctuate at a position away from the energy discontinuity line. The position (x, y) = (0, y) on the front and lee sides of the breakwater is at a distance y(π/2 - β) of the point on the energy discontinuity line along the diffracting wave crest line. The degree of reduction of the diffraction wave energy is proportional to the distance from the point on the energy discontinuity line along the diffracting wave crest line. Therefore, the diffracting wave amplitudes on the front and lee sides of the breakwater would be inversely proportional to the square root of y(π/2 - β).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.189-194
• /
• 2012

The main purpose of reactive power compensation monitoring system is to manage factory electrical installation efficiently by On-Off switching reactive power compensation equipment. The existing reactive power compensation monitoring system is only able to be managed by operator whenever electrical installation needed reactive power. Therefore, it may be possible for propagating the installation's faults when operator make the unexpected mistakes. To overcome the unexpected mistakes, in this paper, the author presents a reactive power compensation monitoring system for factory electrical installation using active database. by using active database production rule, stated system can minimize unexpected mistake and can operate centralized monitoring system efficiently. Test results on the five factory electrical installations show that performance is efficient and robust.

• KOMUNHWA
• /
• no.56
• /
• pp.247-261
• /
• 2000

In regard to the political status of Cheju during Kory$\u{o}$ Dynasty, it has been broadly discussed and accepted that Cheju had remained independent or semi-independent as a feudal nation until the 10th year(l105) of the reign of Sukjong(肅宗) o

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.339-344
• /
• 2001

We propose a method to represent binary data by modulating both the intensity and the phase of uniform plane waves with a twisted-nematic liquid crystal display for holographic digital data storage especially in a disk-shaped recording medium. As far as intensity modulation is concerned, our method is not different from the conventional method, because binary bit values 0 and 1 are represented by the dark (off) and lit (on) states of the liquid crystal display pixels, respectively (or vice versa). With our method, however, the on pixels are also controlled so that the beams passing through them can have one of two different phase delays. If the difference of the two phase delays is close to 180 degrees, we can reduce the dc component of the data image and thus improve the beam intensity uniformity at the holographic recording plane when Fourier plane holograms are recorded. The feasibility of our method is experimentally demonstrated. rated.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.15-22
• /
• 2011

Integrated-optic symmetric/asymmetric Mach-Zehnder interferometers at $1.3{\mu}m$ wavelength were studied as sensing part for electric-field measurement system. The devices were simulated based on the BPM software and fabricated utilizing Ti-diffused $LiNbO_3$ channel optical waveguides and lumped-type electrodes. A half-wave voltage of $V_{\pi}$=6.6V and modulation depth of 100% and 75% for a symmetric structure were measured for 200Hz and 1kHz electrical signal bandwidth, respectively. By the way, almost half-maximum power transmission was observed for asymmetric interferometers with ${\pi}$/2 intrinsic phase difference. Expected experimental measurements were observed for 1kHz electrical signal bandwidth.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.155-162
• /
• 2012

The Thomsen-Haskell method was used to determine sensitivities of the Rayleigh-wave phase velocities and spectral amplitude of vertical ground motion to insertion of a single velocity-anomaly layer into overburden underlain by a basement. The reference model comprised a 9-m thick overburden with shear-wave velocity (${\nu}_s$ of 300 m/s above a half-space with ${\nu}_s$ = 1000 m/s. The inserted layer, with a velocity of 150, 225, 375, or 450 m/s and a thickness of 1, 2, or 3 m, was placed at depths increasing from the surface in increments of 1 m. Phase velocities were computed for frequencies of 4 to 30 Hz. For inserted layer models, we placed an anomalous layer with thickness of 1 ~ 3 m, shear-wave velocity of 150 ~ 450 m/s, and at depths of 0 ~ 8 m in the overburden. The frequency range of 8 ~ 20 Hz were the most sensitive to the difference of $C_R$ between the inserted and reference models (${\Delta}C_R$) for h = 1 m and the frequency range got wide as h increased. For all of the models, the spectral amplitudes of the fundamental mode exceeded those of the $1^{st}$-higher mode except at frequencies just above the low-frequency cutoff of the $1^{st}$-higher mode.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.161.2-161.2
• /
• 2016

고전적인 하이젠베그 형태의 교환상호작용에 따르면 인접한 스핀의 상태는 평행 또는 반평행 상태를 상태를 안정적으로 가진다. 최근 좀 더 일반적인 형태의 교환상호작용에 대한 연구가 이루어지고 있는데 대표적인 예로 좔로신스키-모리야 (Dzyaloshinskii-Moriya, DM) 교환상호작용이 있다. 이 현상은 인접한 스핀끼리 수직인 상태를 선호한다. 따라서 이 현상에 의해 공간상에 꼬여있는 스핀상태가 만들어지게 되는데 대표적인 예로 위상학적으로 안정된 스커미온이라는 스핀상태가 있다. DM은 크게 두가지 타입을 가지는데 하나는 bulk에서 유발되고 다른 하나는 계면에서 유발되는 것으로 알려져 있다. 이번 발표에서는 계면DM에 의해 형성되는 스커미온 자화상태를 이용한 본연구단의 최근 연구결과들을 소개하려고 한다. 우선 교류자기장을 이용하여 물질 내의 스핀상태를 한쪽 방향으로 이동 시키는 방법과 이를 응용한 메모리 소자의 구현을 설명하고 향후 발전 방향에 대한 최근 연구결과를 소개한다.