• Korean Journal of Ichthyology
• /
• v.35 no.3
• /
• pp.171-176
• /
• 2023

The olfactory organ of Carassius auratus and C. cuvieri was compared morphologically and morphometrically using stereomicroscopy and statistical program (SPSS version 18.0). The external morphology of the olfactory organ consists of the open semicircular anterior and posterior nostril, and nasal flap. The internal structure showed the oval rosette consisting of several lamellae arranged radiately. In statistical analysis of standard length (SL), olfactory lamellar number (LN), and SL/LN ratio between two species using independent two sample t-test and Pearson's correlation and coefficient, C. cuvieri is the longer SL than that of C. auratus and C. auratus LN (14~20) is lager than that of C. cuvieri (14~16) (P<0.001) and C. auratus LN/SL ratio (12.7±0.7%) is larger than that of C. cuvieri (8.2±0.6%). These results suggest that i) open semicircular nostrils is functional morphology to offset the boundary layer and ii) the lager LN of smaller C. auratus may be a morphological adaptation to reflect its higher olfactory dependence than C. cuvieri and iii) such interspecific difference in LN and LN/SL ratio could be applied as a new taxonomic trait for identification.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.118-124
• /
• 1990

The rope winder in addition to the line hauler was used for recoiling of the main line to the rope pond at the stern, however, catching the loops, evenly revoiling and arrangements of the loops were done manually by two men. The automatic loop catcher under the rope winder was consisted with the rotary lever, semicircle guide plates, transfer belt and swing rope receiver for arrangements of the loops and evenly recoiling. The obtained results are as follows: 1. The minor diameter of a loop and the diameter of the coiling pile in a lead core PP rope(ø 10mm) are about 14cm and 60cm while the rope is piled on the bottom. 2. Distribution ratio of the loops within upper or lower 10cm from the transfer belt is 93% with a lead sinker and 98% without sinker using by the smaller loop catcher. 3. The relationship between revolutions of the rotary lever N sub(1) (rpm) and the hauling pulley N sub(p) (rpm) by gear ratio 3:1 in the smaller loop catcher is as follows: N sub(p) =2.86 N sub(1) +23.74 and optimum ratio of horizontal speed of the loops by the rotary lever to hauling speed is about 70%. 4. The rope receiver is swung front and rear for the evenly recoiling and its period can be controlled by gear ratio or hydraulic circuit in accordance with the interval of the loops.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.4
• /
• pp.3-11
• /
• 2001

To know the seawater infiltration into tidal flat sediment in coastal area is very important, because it is significantly correlated with the infiltration and transportation of pollutants in soil, the supply of dissolved oxygen, nutrients and organic matter to benthic organisms for survival of benthic organisms and the seawater purification. So, we set up purpose to clarify the infiltration behavior of seawater by wave action in tidal flat, to clear the effects of slope of tidal flat and breaking wave height on seawater infiltration and to quantify the infiltration volume of seawater. For purpose, the seawater infiltration was studied with visualization method by using coloring tracer and transparent glass beads replaced as natural sediment in model tidal flat. Specific conclusions derived from this study are as follows. The semi-circular type infiltration of seawater by wave action into saturated sediment was a new infiltration behavior that was not considered in previous studies. The infiltration rate of seawater was increased with increasing of breaking wave height and slope of tidal flat. However, the effects of the slope was bigger than that of breaking wave height on seawater infiltration into tidal flat sediments. It was possible to calculate the infiltration volume of seawater by wave action in natural tidal flat sediment and in fields. Therefore, we can point out that wave action play an important role in the supply of dissolved oxygen, nutrients and organic matter to benthic organisms, transportation or diffusion of pollutants and seawater purification. So, we hope to be studied the supply of food to benthic organism, pollutant transport and seawater purification on the base of these results.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.209-221
• /
• 1995

The purpose of this study was to obtain the lingual morphology(angulation, inclination, horizontal and vertical contour) and lingual arch form of Korean adult with normal occlusion in order to provide the basic datas for lingual brackets and ideal lingual archwire. Dental models of thirty person with normal occlusion(Male : 16, Female :14) were selected for this study. Crown angulation, inclination. horizontal and vertical contour of lingual surfaces from Lt. 1st molar to Rt 1st molar of both upper and lower arch were measured. Lingual arcform was studied from copied papers of dental models attached Fujita lingual bracket. The results of this study were summarized as follows: 1. The average angulation and inclination of lingual surfaces of all tooth types for Korean adults with normal occlusion were obtained. 2. The average horizontal and vertical contour of lingual surfaces of all tooth types were obtained. 3. There were similar figures in horizontal and vertical contour of lingual surfaces between upper and lower molars, upper and lower premolars, upper and lower canines, upper central and lateral incisors and lower central and lateeral incisors respectively. It was possible that the use of those contour of bracket bases in common. 4. The average of lingual archform was provided, which was arch-shaped from canine to canine, linear along the premolars and molars with small offset bend between them, and where canines and premolars met, it was bent in a crank- shape. 3. There was no difference between lingual archform of male and that of female, although lingual archform of female was smaller than that of male in lower arch.

• Journal of the Korean Arthroscopy Society
• /
• v.3 no.1
• /
• pp.54-61
• /
• 1999

The current treatment of extensive meniscal injuries has resulted in numerous investigations and clinical trials to restore normal meniscal functions. A cryopreserved meniscal allograft transplantation is one of the successful methods available to restore the meniscus. All the procedures of 26 cases were performed in an minimal open fashion, though initial four cases were done with the aid of arthroscope. In all of the grafts, we used a bone bridge which was attached to meniscus for better stability and healing. Anterior cruciate ligament reconstructions were also performed simultaneously with the meniscal procedures. We attempted to minimize articular cartilage by employing so called the "Key-hole technique" for the medial meniscus transplantation. First, the meniscal cartilage bone bridge was shaped into a cylinder and a bone tunnel was made just beside the medial border of the anterior criciate ligament insertion of the recipient knee joint, and the bone bridge of the meniscal cartilage was push to press-fit. The inserted meniscal cartilage was sutured by the usually employed technique under arthroscopic control. The lateral meniscus was shaped different to the medial meniscus in that the bone bridge was semicylindrical and the bone trough was made beside the lateral border of the anterior criciate ligament insertion of the recipient knee joint. The meniscus was put into the bone trough and the leading suture was extracted anterior to the tibia and tied the knot. The inserted meniscus was sutured in the same manner as the medial meniscus transplantation. By the above described method, the authors were able to minimize the articular cartilage invasion and transplant the meniscus with relative accuracy.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.1
• /
• pp.41-46
• /
• 1994

Calli were induced from leaf explants of B.falcatum, and selected cell clumps of the calli (900-1, 000${\mu}{\textrm}{m}$) were cultured on MS medium supplemented with 0.1, 0.5, 1.0 or 2.0 mg/L 2, 4-D for 7 days, respectively: The clumps were subsequently transferred onto MS basal medium and subcultured for four weeks. In order to investigate the effect of 2, 4-D pretreatment, the selected clumps were cultured on MS medium supplemented with 0.1 mg/L 2, 4-D for 24, 48, 72, 96, 120 or 144 hours and then transferred to liquid MS basal medium, wherein they were cultured for 4 weeks. Histological observation showed that root initial cells were developed from cells on the surface of clumps or from cells in the inner region. Clumps on the basal medium produced mot within 5 days of culture. The rate of prutruding time was inversely proportional to the concentration of 2, 4-D. The number of adventitious roots per clump preheated with 0.1 mg/L 2, 4-D was an average of 5.2, which was the highest level. On MS medium as control, the clumps formed 3.3 adventitious roots each. As tile concentration of 2, 4-D increased, the number of adventitious roots were declined accordingly: The number of adventitious roots as the period of pretreatment increased upto 120 h.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.4
• /
• pp.273-280
• /
• 1976

Morphological changes of early larval stages of Lophius litulon (Jordan) are described based on 861 individuals collected at the intertidal zone at Haeundae, Busan, on the 20th of June, 1976. Particular emphasis is paid on the development of dorsal spinous rays, ventral fin rays, chromatophore patterns, alimentary canal, gills, branchiostegal rays and teeth. The premordial spinous fin ray of the first dorsal fin appears at the newly hatched larva of around 2.70mm in total length, the second spinous ray at around 5.82mm, and the third spinous ray at around 6.45 nm. Premordial fin rays which develope as a semicircle to cudgel form of the ventral fin appear posterior to the pectoral fin at the larva of around 2.70mm in total length. When the larvae grow up to 6.35mm in total length, the length of the ventral fin is more or less half of the total length of the body. In the early stages$(2.70\~3.75mm)$ melanophores are scattered irregularly on the tail . In the later stages(4.25mm) melanophores are aggregated to form three black spots on medio-lateral part of the tail. The newly hatched larvae have the premordial alimentary canal with mouth and intestine. With decreasing yolk mass the intestine appears more distinctly with curvature, and mouth seems to open. Gills appear at the larvae of 6.35mm in total length; branchiostegal rays appear at the larvae of 6.45mm. Teeth appear at the larvae of 6.25mm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.109-117
• /
• 2015

Aircraft needs an inlet duct to supply the airflow to engine face. A fighter aircraft that requires low radar observability has to hide the engine face in the fuselage to reduce the Radar Cross Section(RCS). Therefore, the flow path of the inlet duct is changed into S-shape. The performance of the aircraft engine is known to be influenced by the shape and the centerline curvature of the S-Duct. In this study, CFD analysis of the RAE M 2129 S-Duct has been performed to investigate the influence of aspect ratio of inlet geometry. The performance of the S-Duct is evaluated in terms of the distortion coefficient. To simulate the flow under adverse pressure gradient better, $k-{\omega}SST$ turbulence model is employed. The computational results are validated with the ARA experimental data. The secondary flow and the flow separation are observed for all computational cases, while the semi-circular geometry has been found to produce the best results.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.258-265
• /
• 1992

A low loss optical waveguide of $P_{2}O_{5}-SiO_{2}$on Si substrate is produced by using the chemical vapour deposition method of $SiO_2$ thin films used in Si technology. Propagation loss of the waveguide layer was 1.65 dB/cm as produced and reduced down to 0.1 dB/cm after heat treatment at $1100^{\circ}C$. By using laser lithography and reactive ion etching method $P_{2}O_{5}-SiO_{2}$ waveguide was produced and subsequently annealed at $1100^{\circ}C$.As a result of this annealing the shape of the waveguide core was changed from rectangular to semi-circular form, and the propagation loss was reduced as down to 0.03 dB/cm at 0.6328$\mu$m and 0.04dB/cm at 1.53$\mu$m. We think that the mechanism of the reduction in propagation loss during the heat treatment is the following: 1) The hydrogen bonding in waveguide layer, which causes absorption loss, is dissociated and diffused out. 2) The roughness of the interface and the micro-structure of the waveguide layer is removed. 3) The irregularities in the cross-sectional shape of the waveguide which was induced during the lithographic process were disappeared by flowing of the waveguide core.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.13-18
• /
• 1999

External morphology characteristics of the greenhouse whitefly, Trialeurodes vaporarium were investigated by scanning electron microscopy. The antennae of the greenhouse whitefly was 6 segments. rod-shape, and 0.3mm length. On the 6th segment, there were many sensilla for searching host-plant as olfactory receptor. The mouthpart of the greenhouse whitefly was a piercing-sucing type, then its stylet was well developed for piercing plant leaf tissue. Claw of the foreleg was a 3-way hook shape including paranychium for attaching plant surface to pierce and lay egg.