• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.311-317
• /
• 2004

A low loss reflection type analog phase shifter which is realized with two varactors and branch coupler. is described. A new design technique for the large phase shift is applied using short stub microstripe lines. This paper presented the realization of design and experimental results. Through the experiment using the duroid microstrip line and varactors, the phase of 2.26GHz signal is controlled to the DC voltage with the phase shift range of 170$^{\circ}$. The achieved insertion loss of less than 3㏈ and the return loss of mote than 12㏈ are achieved over all phase states.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.62.2-62.2
• /
• 2011

산업화 이후, 석탄 석유를 중심으로 한 화석연료가 이산화탄소를 대량으로 배출하며 지구 온난화를 야기함에 따라, 기존의 화석연료를 대체할 청정하고 무한 재생 가능한 대체에너지로 가장 큰 기대를 받고 있는 것은 태양에너지이며, 이에 보조를 맞춰 태양광발전에 대한 연구개발이 국내외적으로 활발히 진행되고 있는 실정이다. 태양 전지는 빛 에너지를 직접 전기 에너지로 바꿔주는 소자로, 셀의 효율을 높이기 위해서는 최대한 많은 빛을 흡수시킬 수 있는 것이 중요하다. 빛의 반사를 줄이는 방법에는 texturing과 antireflecting coating이 있다. Antireflecting coating은 반도체와 공기의 중간 굴절율을 갖는 박막을 증착하여 측면 반사를 감소시킴으로서 빛의 손실을 감소시키는 역할을 한다. 과거에 반사방지막으로 가장 많이 사용되었던 물질은 SiO로써 굴절률은 1.8~1.9로서 최소의 반사율은 1% 미만이지만, 가시광선영역에서의 흡수에 의한 손실이 생기므로, SiNx가 대체 물질로 제안되었다. SiNx의 경우 굴절률이 약 1.5로서 Si에 쉽게 형성시킬 수 있고, texturing된 Si 표면에 적합하며 반사율을 10%에서 2%로 줄일 수 있는 장점을 가지고 있다. 따라서 본 연구에서는 high power, high frequency PECVD 방법으로 $SiH_4$와 $NH_3$ gas의 비율, $N_2$ carrier gas 등 공정 변수를 변화시켜 증착한 SiNx 박막의 결정학적 특성을 X-ray diffraction 분석과 XPS (X-ray photoelectron spectroscopy)를 통해 화학적 결합을 확인하였고, 이를 FT-IR (Fourier Transform-Infrared spectroscopy)를 통해 관찰한 결과와 연관시켜 분석하였다. 굴절율의 경우 ellipsometer를 이용하여 측정하였으며 위의 측정을 통하여 SiNx박막의 반사 방지막으로써의 가능성을 확인 하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.71-77
• /
• 2018

The optical time domain reflectometer (OTDR) is the most widely used method to monitor problems with currently installed optical fibers. The OTDR is an instrument designed to test the FTTx network and evaluates the physical properties of the fiber, such as transmission loss and connection loss. It is important to improve the spatial resolution in order to accurately grasp the optical path problems by using the OTDR. When the pulse width is less than twice the distance between the two reflectors, the signals reflected from the two reflectors are reflected without overlap, so that the reflected signal can be distinguished. However, when the pulse width is larger than twice the distance between the two reflectors, so that the reflected signal can not be distinguished. In order to overcome these limitations, this paper proposed a method of improving spatial resolution by applying a super resolution algorithm. As a result of the simulation, the resolution is improved when the super resolution algorithm is applied, and the event interval can be analyzed more precisely.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1731-1736
• /
• 2008

In this paper, singly fed circularly polarized nearly-square patch antenna for receiving S-DMB is presented. It used teflon substrate of relative dielectric constant ${\in}_{\gamma}=2.2$ and the sire is $40{\times}40{\times}15[mm]$. Experimental results of fabricated antenna show that input return loss and axial ratio are about 22MHz, 25MHz at the center resonant frequency, respectively. And fabricated LNA has gain of 27.5 [dB], NF of 1.27 [dB], input return loss of -15.4 [dB] and output return loss of -18.9 dB, respectively. Simulation results and experimental results are good agreements. This proposed antenna is well able to handheld gadgets for receiving S-DMB.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.534-537
• /
• 2019

The optical loss is caused by reflection on the surface of the solar cell, without being absorbed inside the solar cell. Research is actively being conducted to reduce optical loss due to such reflection of light and to improve conversion efficiency of solar cells. In this paper, the surface of the FTO glass substrate was wet etched, and the structural characteristics of the tough surface were evaluated. In addition, optical properties on the surface were analyzed, etched using spectrometer. When light was introduced to a rough surface formed by etching, it was confirmed that the multiple reflections reduced the amount of light reflection from the surface, thereby increaseing the amount of light penetrating the glass substrate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.240-240
• /
• 2010

반사 방지막은 LEDs, 태양전지, 센서 등의 광전소자의 효율을 향상시키는데 사용되고 있다. 일반적으로 사용되는 단층 또는 다층 박막의 반사방지막은 thermal expansion mismatch, adhesion, stability 등의 문제점을 가지고 있다. 따라서, 단층 또는 다층 박막의 반사방지막 대신에 파장이하의 주기를 갖는 구조(subwavelength structure, SWS)의 반사방지막 연구가 활발히 진행되고 있다. 입사되는 태양 스펙트럼의 파장보다 작은 주기를 갖는 SWS 구조는 Fresnel 반사율을 감소시켜 빛의 손실을 줄일 수 있다. 이러한 SWS 반사 방지막을 제작하기 위해서는 에칭 마스크가 필요하다. 에칭 마스크 제작을 위해서 사용되는 장비로는 홀로그램, 전자빔, 나노임프린트와 같은 리소그라피 방법이 있으나, 이들은 제작 비용이 고가이며 복잡한 기술을 필요로 한다. 따라서 본 실험에서는 리소그라피 방법보다 간단하고 저렴한 self-assembled Au 나노 입자 에칭 마스크를 이용한 실리콘 SWS 반사 방지막을 제작하여 구조적 및 광학적 특성을 연구하였다. Au박막은 열증발증착(thermal evaporator)법에 의해 실리콘 기판 위에 증착되었고, 급속 열처리(rapid thermal annealing, RTA)를 통해 Au 나노입자 에칭 마스크를 형성시켰다. 실리콘 SWS 반사방지막은 식각 가스 $SiCl_4$를 기반의 유도결합 플라즈마(inductively coupled plasma, ICP) 장비를 사용하여 제작되었다. Au 나노 입자의 마스크 패턴 및 에칭된 실리콘 SWS 프로파일은 scanning electron microscope를 사용하여 관찰하였으며, UV-Vis-NIR spectrophotometer를 사용하여 300-1100 nm 파장 영역에 따른 반사율을 측정하였다. ICP 에칭 조건을 변화시켜 가장 낮은 반사율을 갖는 최적화된 실리콘 SWS 반사방지막을 도출하였다. 최적화된 구조에 대해서, 실리콘 SWS 반사방지막은 벌크 실리콘 (>35%)보다 더 낮은 5% 이하의 반사율을 나타냈다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.43-47
• /
• 2015

In this work, a broadband microstrip (MSL) - to - waveguide (WR12) transition has been presented for millimeter-wave module applications. For improvement of a bandwidth, the radial MSL electrical-probe is designed on the low-loss organic dielectric substrate. The designed and tested characteristics of the proposed transition are characterized in terms of an insertion and return loss. Considering the loss contribution of the cable adapter and waveguide transition for the measurement, the proposed transition loss can be analyzed as -1.88 and -2.01 dB per a transition at 70 and 80 GHz, respectively. The bandwidth of the proposed transition for reflection at -10 dB is 26 GHz at all test frequencies from 67 to 95 GHz. Compared to the state-of-the-art results, improvement of 8.3 % is achieved for the operation bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.950-954
• /
• 2003

This paper presents the delivered power and reflection coefficient in metallic shielding enclosure excited by the interior source, which are evaluated with the method of moments, and describes a method for reducing the radiation of electromagnetic fields in the cavity by putting lossy dielectric material in one inside wall. In this paper we introduce carbon polystyrene-foam as lossy dielectric material and observe it's effects of reduction when the thickness and permittivity of lossy dielectric material are changed. The results show that the reduction of the electromagnetic radiation can be achieved by controlling the amount of carbon in lossy dielectric material. The theoretical analysis is verified by the measured delivered power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.237-243
• /
• 2008

This paper presents the backplane effects for two-wire transmission line with different line length crossing the rectangular aperture in an infinite ground backplane. The FDTD method is used to determine the characteristics of the backplane insertion loss and return loss of the transmission line in accordance with the transmission line spacing and additional wire lengths. The results show that the insertion gain is obtained for the narrow spacing of the transmission line and the insertion loss is appeared for the transmission line with the additional wire The measurements of return loss are performed to verify the theoretical analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.9-14
• /
• 2012

In this study, the diplexer used a separator or a combine of signals was designed and its characteristics were investigated. The diplexer consists of two fixed tuned bandpass filter such as low pass filter(LPF) and high pass filter(HPF) sharing a common part and was simulated. The diplexer with micro-strip structure was fabricated. The LPF of diplexer has insertion loss of -0.4 dB, return loss of -30 dB and 1.6 GHz cut-off frequency and HPF has insertion loss of -0.8 dB, return loss of -30 dB and 1.9 GHz cut-off frequency, respectively.