• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.1-7
• /
• 2014

This paper presents the development of a compact position generator to be used for industrial purposes based on a pump controlled Electro-Hydraulic Actuator (EHA), which is closed-loop controlled by an embedded based Iterative PID controller. The controller is designed by combining the PID controller and the iterative learning scheme to perform tracking control for periodically desired references. Control algorithm is implemented on an embedded computer (AD 7011-EVA) which makes the implementation and application in industrial environments easier.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.38-46
• /
• 1999

This paper discusses the repetitive tracking control method for a coarse-fine actuator. The proposed system is composed of a magnetic linear drive as a coarse actuator and a piezoelectric linear positioner as a fine actuator. In particular, nonlinear friction in a magnetic linear drive and hysteresis characteristic of a piezoelectric linear positioner are modeled first. The feedback linearization loop uses these models in tracking position control. The control strategy is then further extended to include a repetitive control algorithm in tracking periodic reference inputs. This repetitive controller is implemented on the existing PID controller augmented with feedback linearization loop. The experimental results show that performance in tracking sinusoidal waveforms is noticeably improved by augmenting a PID controller with feedback linearization loop and a repetitive controller together.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2762-2770
• /
• 2000

The refuse incineration plant has an important role in saving the combustion energy for local heating system. But harmful combustion gas(NOx etc.) leads to some serious environmental problem. To reduce the gas, a SCR(Selective Catalytic Reduction)system is installed and it is controlled by adjusting the flow of ammonia gas(NH3) . In this paper, we apply a repetitive control method to reduce NOx by adjusting the flow of ammonia gas for SCR system in a refuse incineration plant which is located in Haeundae, Pusan, Firstly, we analyze the inlet NOx period by FFt method, and verify its periodic variations. Secondly, we design a repetitive control system by using state space model method. Lastly, the effectiveness of repetitive control system is shown by comparing to a conventional PID control in simulation and experimental results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2009-2014
• /
• 2007

A novel method of minimizing video quality variation is proposed for a real-time frame-layer rate control algorithm with a transmission buffer. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize variation in distortion between frames. In order to reflect the buffer status, we use well-known PID control method. Computational complexity of PID control is very low, so the proposed algorithm is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better PSNR performance than the existing rate control method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.332-335
• /
• 2007

A real-time frame-layer rate control algorithm with a transmission buffer is proposed for minimizing video quality variation. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize variation in distortion between frames. In order to reflect the buffer status, we use well-known PID control method. Computational complexity of PID control is very low, so the proposed algorithm is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better PSNR performance than the existing rate control method.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.71-74
• /
• 2002

본 논문에서는 유전알고리즘(GA)을 이용한 PID계수 자동조정기법에 관한 DC 서보 모터 속도 제어기 설계를 목적으로 한다. DC 서보 모터는 수많은 제어용 기계나 로봇 등의 응용분야에 사용되고 있고 이러한 분야에서 제어기 파라미터들의 선택이 사용자의 전문적인 지식을 요구하게 된다. 따라서 일반적인 공정 기술자들은 시행착오에 의해 제어기 파라미터들을 계속적으로 반복 조절해 나가야 한다. 이와 같이 동적 시스템의 변화나 외란에 대하여 파라미터 계수를 자동 조정해야 할 경우 유전알고리즘을 사용함으로써 보다 정밀하고 최적화된 파라미터 계수값을 추종함에 따라 그 성능을 높일 수 있다. 본 논문에서는 DC 모터의 동특성을 분석하여 얻은 동특성 모델링으로부터 응답 특성이 빠르고 속도 정밀도가 향상된 구동제어가 가능한 제어기를 설계하고 이를 PID제어기와 비교 평가하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.270-273
• /
• 2017

Productivity through reduced defects in plastic injection molding and reduced cycle times is a long-standing need in the injection industry. In particular, productivity is very urgent for the domestic injection industry, which is caught between the pursuit of latecomers such as China and technological gap with Germany and Japan which will not be narrowed down. Through 30 years of research and experience in the domestic injection industry, we have found that controlling the surface temperature of injection molds is the key of quality control. There have been various attempts to utilize advanced control techniques such as PID control, but the productivity against leading companies in Germany and Japan is still insufficient. Using Approximation Algorithm - "Knapsack" and "Minimum Makespan Scheduling", We want to show how to efficiently control objects with periodic repetitive data patterns that are difficult to solve with PID control. In addition, We want to propose that the control by Approximation Algorithm is effective enough to improve the productivity of the product by analyzing the data extracted from actual injection site.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.335-338
• /
• 1996

In this paper, we are going to design an iterative learning controller with the robust properties for initial error. For this purpose, the PID-type learning law will be considered and the design guide-line will be presented for the selection of the learning gain. Also, we are going to suggest a condition for the convergence of control input for a plant with input delay. Several simulation results are presented, which shows the effectiveness of the proposed algorithms.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.131-138
• /
• 1996

This paper suggests a servo control algorithm to reduce the repeatable tracking error which is not explicitly taken into account in the design of a conventional PID controller of a computer hard disk drive. The robust stability of the repetitive control system with multiplicative modelling error is analyzed, and the controller was implemented using a fixed point DSP(Digital Signal Processor). Experimental results show that the repetitive errors are suppressed effectively by the proposed controller.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.525-532
• /
• 2004

Telemanipulator is distingushed from industrial robot by iterating same specified work. Manipulator operator is included in control loop for controlling the telemanipulator because he decide directly during the work and order controllabily. We implement fuzzy controller for reducing the modelling error of telemanipulator which depend on the PID controller. But position-force control method of bidirectional control impose unsafety of vibiration and Analytic Hierchy method can stabilize for reducing nonlinear modelling error by expert operator because of transformation empirical control rule to linear model.