• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.189-196
• /
• 2018

Propeller performance measurement system for high altitude UAV was designed and applied to the wind tunnel test for 2 propeller models with a diameter around 1 m. Mechanical power of the propeller was directly measured by using the torque sensor installed on the rotating axis. The thrust of whole operation body including the propeller was measured by thrust road cell. The guide rail system was suggested to reduce the weight influence of operation body on the thrust road cell. The influence of each measured variables on the aerodynamic coefficients was studied with the repeatability and uncertainty analysis. This analysis result shows that the accuracies of the road cell and the wind velocity were major factors for the thrust coefficient. Propeller performance with typical RPM was measured with various wind speeds and the test results was summarized by performance coefficients for 5 different RPM.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.167-173
• /
• 2004

The heterodyne He-Ne laser interferometer is the most widely used sensing unit to measure the position error. It measures the positioning error from the displacement of a moving reflector in terms of the wave length. But, the wave length is affected by the variation of atmospheric temperature. Temperature variation of 1$^\circ C$ results in the measuring error of 1ppm. In this paper, for measuring more accurately the position error of the ultra precision stage, the refractive index compensation method is introduced. The wave length of the laser interferometer is compensated using the simultaneously measured room temperature variations in the method. In order to investigate the limit of compensation, the stationary test against two fixed reflectors mounted on the zerodur$\circledR$ plate is performed firstly. From the experiment, it is confirmed that the measuring error of the laser interferometer can be improved from 0.34${\mu}m$ to 0.11${\mu}m$ by the application of the method. Secondly, for the verification of the compensating effect, it is applied to estimate the positioning accuracy of an ultra precision aerostatic stage. Two times of the refractive index compensation are performed to acquire the positioning error of the stage from the initially measured data, that is, to the initially measured positioning error and to the measured positioning error profile after the NC compensation. Although the positioning error of an aerostatic stage cannot be clarified perfectly, it is known that by the compensation method, the measuring error by the laser interferometer can be improved to within 0.1${\mu}m$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.903-909
• /
• 2018

In this paper, performance analysis of machine vision techniques is presented to improve the convenience and speed of automatic inspection in the industrial field when machine vision is applied to the image not taken in the stationary state, but in the moving state on a conveyer. When the length of cylindrical rods used for automobiles was measured using the edge detection method, the conveying speed increased, and the uncertainty of the boundary between the background and the part image increased, which resulted in a shorter image of the object taken. This paper proposes a linear compensation method to predict the biased errors of the length measurements after examining the pattern of biased and random errors, respectively, with 6 different types of specimens and 7 velocity stages. The length measurement corrected by the linear compensation method had the same accuracy as the stationary state within the speed range of 30 cm/s and could enhance the application capability in automatic inspections.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.327-332
• /
• 2021

At the package level, semiconductor reliability inspections involves mounting a semiconductor chip package on a test socket. The form of the test socket is basically determined by the form of the chip package. It also acts as a medium to connect with test equipment through mechanical contact of the leads and socket leads in the chip package, and it minimizes signal loss in a signal transmission process so that an inspection signal can be delivered well to the semiconductor. In this study, a technique was applied to examine the interdependence of adjacent electrical transfer routes and the structure of adjacent electrical transfer paths. The goal was to enable short-circuit testing of fewer than 100 silicon test sockets through a single interface for life tests and precision measurements. The test results of the developed device show a test precision of 99% or more and a simultaneous test speed characteristic of 0.66 sec or less.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.312-312
• /
• 2022

우리나라는 하천법 및 소하천정비법에 의거하여 하천기본계획 수립 또는 하천의 지정 및 변경고시 시 하천구역을 지정하고 있다. 하천구역은 일반적으로 제방부지 및 제방하심측 토지경계를 기준으로 지정하나, 제방이 존재하지 않는 무제부 구간의 경우 명확한 제방경계가 없는관계로 하천법 제 10조 3항에서 5항까지 별도의 기준을 통해 하천구역 지정을 권장하고 있는 실정이다. 하천구역 설정 시 기준으로 삼는 횡단측점 자료의 경우 그 특성상 하천의 종단방향으로 불연속적인 특징을 갖고 있어 평면상 정확한 경계의 파악이 어려우며, 도로·철도 등 선형시설경계를 하천구역으로 설정 시 편입용지의 보상기준이 모호하여 다량의 민원이 발생하고 있다. 본 연구에서는 하천정비 시 기본계획이 수립되어 각 횡단측점별 결정된 계획홍수위를 기반으로 인접 지형의 홍수위 영향범위를 자동으로 추출하여 하천구역을 정밀하게 결정할 수 있는 방법론을 정립하고자 한다. 첫째로, 하천중심선의 각 측점의 위치정보와 하천의 지형을 위상정보체계로 구성하여 DB를 구축하였다. 둘째로, 측선과 측선사이 절점에 계획홍수위를 선형보간하여 부여하고 이를 지형도의 최단거리에 위치한 지형의 격자표고와 비교해 침수여부를 판단한다. 셋째, 최단거리 지형격자가 침수로 판단될 시 인접한 8개 지형격자의 지형표고와 홍수위를 비교하여 반복적으로 위 과정 수행을 통해 계획홍수위 기반 침수범위를 추출한다. 마지막으로, 이를 수치지형도에 중첩시켜 최종 정밀 하천구역을 결정할 수 있다. 이를 이용하여 산정된 정밀한 하천구역 경계설정을 통해 하천 내사유지 편입을 최소화함과 동시에 명확한 하천구역 구획기준을 정립하여 토지소유주와 담당부처 간 논의 시 기반자료로 활용될 수 있고, 하천구역의 신속하고 정확한 구역설정을 통해 하천인근의 토지이용 고도화 및 효율적인 이용이 가능할 것으로 기대된다.

• KIISE Transactions on Computing Practices
• /
• v.20 no.11
• /
• pp.598-603
• /
• 2014

In wireless sensor networks, two methods have been generally used to track continuously moving object: a user query-based method and a periodic report-based method. Although the former method generates more overhead as a result of the user queries, the former one is also an energy-efficient method that does not transfer unnecessary information. For the user query-based method, a virtual tree that consist of sensor nodes is used to perform the user query and the sensor reporting. The tree stores the information of the mobile objects, and the stored information triggers a report b the user query. However, in case of a fast-moving object, the tracking accuracy decreases as a result of the time delay of the end-to-end repeated query. In order to solve this problem, we propose a query-relay method that reduces the time delay for mobile object tracking. In the proposed method, the nodes in the tree relay the query to adjacent nodes according to the movement of mobile object that is tracked. When the query messages are relayed. The end-to-end querying time delay is reduced. and a simulation shows that our method is superior to existing ones in terms of tracking accuracy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.283-287
• /
• 1997

공작기계의 가공정도는 공작기계의 운동기구가 가지고 있는 기하오차와 절작작업시 발생하는 진동, 열,절삭력에 의해서 공작기계의 구조계,주축계,이송계의 변형에 의해서 직접적인 영향을 받는다. 또 가공정도는 제품의 정밀도 및 품질에 직접적인 영향을 미치기 때문에 가공정도를 향상시키기 위한 방법으로 공작기계의 오차를 측정/해석하는 방법이 연구되고 있다. 일반적으로,공작기계의 오차는 Quasi-static 오차와 Dynamic오차로 구분할수 있다. Dynamic 오차는 기계의 진동,채터 및 스핀들의 진동에 의해서만 발생하는 오차이며,Quasi-static 오차는 공작기계 구성요소인 안내면,칼럼,볼스크류등의 기하오차와 온도변화에 의한 열변형오차에 의해서 발생한다. 특히,공작기계 및 절삭가공중에 발생하는 열원에 의한 열변형 오차는 공작기계의 기하오차에 비해서 가공정도에 큰 영향을 미치며[1,2],발생오차의 약 40~70% 정도가열변형 오차에 기인한 것으로 알려져 있다[1]. 실제 많은 실험결과를 볼 때 CNC공작기계이 경우는 열변형에 의한 오차는 기하오차에 비해서 매우 크게 나타났다. 이러한 열변형 오차는 공작기계 주위 온도와 공작기계 구성요소(칼럼,이송유니크,스핀들유니트)의 비선형적인 온도 특성에 의해서 주로 발생하고, Time-variant특성을 가지고 있기 때문에 작업중에 발생하는 온도특성에 따른 열변형 오차를 최소화 할 수 있는 방법이 필요하다. 스핀들유니트는 냉각방식을 사용하여 온도변화를 줄이고 있으나 반복적인 작업과 스핀들의 고속회전으로 인해서 복합 적인 온도변화를 발생시킨다. 또, 볼스크류의 지지방식이 양쪽 고정단 형태이기 때문에 조립시 예압(pre-load)을 주어서 열팽창을 보상하고 있으나 공작기계의 반복적인 이송으로 인해서 발생하는 온도변화에 의한 열오차를 보상하는데는 어려움이 있다.됩니다. 생리적 저항력이 없는 어린이들은 이러한 공해와 생활조건의 제일희생자가 되는 것입니다. 엄마들이 "얘는 감기, 비염, 편도선을 달고 삽니다...." "얘는 코감기, 목감기 번갈아 가면서 하도 앓고 있어서 양약율 중지하고 현재 한약을 먹고 있습니다." 이러한 역경은 극복할 수 있는가\ulcorner 질병의 메카니즘은 어떻게 작용되는가\ulcorner 등등을 육미회 센타에서 체험한 사례를 가지고 말씀드리고자 합니다..ell layer (PCL)와 glia에 SOD-1이 강하게 염색되었다. APT 병용 투여로 상당수의 경련이 일어나지 않은 흰쥐는 해마의 DG에 FRA가 경미하게 염색되었고, PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.87-90
• /
• 1973

Optimum plot shape and size in a uniformity trial in the newly founded experimental farm of KAERI were determined for seed yield with the basic units consisted of 2.5m $\times$ 0.6m plot. Various plot sizes and shapes were made by combination of the basic units. Coefficients of variations for yield were 21% in local branch type variety Kumkang-Dairip and 20% in the introduced branchless type variety Clark. This result indicates that the field in the new experimental farm is appropriate for soybean yield trials when adequate number of replications are employed in the field experiment. In general, C. V. values were gradually decreased with increase of plot sizes. Although the data were not consistant, the errors for the long narrow plots tend to have somewhat smaller than for the square shape plots. A sharp decrease in C.V. value was found from the $4.5\textrm{m}^2$ plot in the variety Kumkang-Dairip and from the $6\textrm{m}^2$ plot in the variety Clark. These results imply that 5-$6\textrm{m}^2$ plot could be used for yield trials in early generations of hybrid progenies. 2.5-5m long plot with 3-4 replications will be practical for yield trials in the early hybrid generations. The C.V. values with 7.5m long plot was about 16% in both varieties and 15.3% in 10m plot. These results indicate that 7.5-10m plot with 3-4 replications could be employed in accurate yield test in the advanced generations.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.23-30
• /
• 1999

This paper investigates the radial performance of self-acting spiral-grooved air bearing, used to support small high-speed rotating bodies. Repeatable runout, nonrepeatable runout, stiffness and supporting load are selected as the performance. The clearance between rotor and stator, the stator groove depth, and the rotating speed are chosen as three main parameters affecting the performances. Force application and displacement measurement are done in a noncontact manner, in order not to disturb operation: electromagnetic force is applied to the rotor and gap sensors are used to measure the displacement of the rotor. Experimental results show that repeatable runout decreases as speed, groove depth and clearance decrease. Nonrepeatable runout decreases as clearance decreases, and it has a minimum value at $5.5{\mu}m$ of grove depth and a maximum value at speed of 18.000rpm. Stiffness increases as speed increases and clearance decreases, and has a maximum value around $5.5{\mu}m$ of groove depth. The relationship between force and displacement is linear for small displacement, but becomes nonlinear for large displacement. Supporting load is linearly proportional to the stiffness, and it is a maximum value around $4.75{\mu}m$ of clearance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2341-2346
• /
• 2017

The relative position of the eyeballs in the orbit can be a criterion for estimating multiple pathological conditions. Especially, it is useful to diagnose orbital fracture, thyroid eye disease, orbital tumor, and to evaluate the result of drug and surgical treatment. The Hertel and Naugle exophthalmometer, which are the most commonly used measuring instruments for measuring the prominence of the eye, are different from each other. Even if the same examiner repeatedly measures, it is inevitable. Also, even if the same exophthalmometer is different from the manufacturing company, the design of the fixed part of the orbit is different, and a measurement error is caused by the inspectors. In this paper, we propose a method of automatic measurement that can increase the accuracy and repeatability of measurement of exophthalmos using white light scanning interferometer, which is a 3D image measurement technique.